User manual ZYXEL ZYAIR G-220

[. . . ] ZyAIR G-220 802. 11g Wireless USB Adapter User's Guide Version 1. 00 May 2004 ZyAIR G-220 User's Guide Copyright Copyright ©2004 by ZyXEL Communications Corporation The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patents' rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. [. . . ] The number of channels varies depending on the setting in the Advanced Setting screen. This field is not applicable when you select Infrastructure in the Network Type field. DESCRIPTION 3-4 Access Point Mode Configuration ZyAIR G-220 User's Guide Table 3-2 Station Mode: More Setting. . . LABEL Tx Rate DESCRIPTION Select a transmission speed from the drop-down list box. Choose from Auto (default), 1 Mbps, 2 Mbps, 5. 5 Mbps, 11 Mbps, 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, and 54 Mbps. Enter the SSID of the wireless network to which you want to associate. To associate to an ad-hoc network, you must enter the same SSID as the peer computer. Otherwise, select Any check box to associate to or roam between any infrastructure wireless networks. Select Enable WEP to activate the WEP encryption and click WEP Encryption Key Setting to configure the WEP keys. Click Apply to save the changes back to the ZyAIR, or click Change to start configuring the fields. SSID Network Type Encryption Authentication Mode Apply/Change Encryption Setting WEP Key Setting. . . Click WEP Encryption Key Setting to display the screen and configure WEP key settings. Profile The Profile function allows you to save the wireless network settings in this screen, or use one of the preconfigured network profiles. Profile name Load Save Current Enter a descriptive name in this field or select a pre-configured network profiles from the drop-down list. To use a previously saved network profile, select the profile file name from the dropdown list box and click Load. Enter a descriptive name in the Profile name field and click Save Current to save the current settings in this screen to a new profile. To delete an existing wireless network configuration, select a profile from the drop-down list box and click Delete. Delete Access Point Mode Configuration 3-5 ZyAIR G-220 User's Guide Table 3-2 Station Mode: More Setting. . . LABEL Others Advanced Settings. . . Screen Click the WEP Encryption Key Setting button in the More Setting. . . Table 3-3 Station Mode: WEP Key Setting. . . LABEL DESCRIPTION WEP Key Setting The WEP keys are used to encrypt data before transmitting. The values for the keys must be set up exactly the same on the APs or other peer wireless computers as they are on the ZyAIR. 3-6 Access Point Mode Configuration ZyAIR G-220 User's Guide Table 3-3 Station Mode: WEP Key Setting. . . LABEL Key Length Default Key ID Key Format Key Value #1 . . . 4 DESCRIPTION Select 64 bit, 128 bit or 256 bit and then fill in the related fields. Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example, 11AA22BB33) for HEX key type or Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for example, MyKey) for ASCII key type. If you select 128 bit in the Key Length field, Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example, 00112233445566778899AABBCC) for HEX key type or Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for example, MyKey12345678) for ASCII key type. If you select 256 bit in the Key Length field, Enter either 58 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example, 00112233445566778899AABBCC) for HEX key type or Enter 29 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for example, MyKey12345678) for ASCII key type. You must configure all four WEP keys the first time you use the ZyAIR. The values for the WEP keys must be set up exactly the same on all wireless devices in the same wireless LAN. ASCII WEP keys are case sensitive. Apply/Change Click Apply to save the changes back to ZyAIR, or click Change to start configuring the fields. Access Point Mode Configuration 3-7 ZyAIR G-220 User's Guide 3. 5 The Advanced Setting. . . [. . . ] Macintosh OS X 1. Click the Apple menu, and click System Preferences to open the System Preferences window. 2. Click Network in the icon bar. - Click the TCP/IP tab. J Setting Up Your Computer's IP Address ZyAIR G-220 User's Guide 3. 4. For dynamically assigned settings, select Using DHCP from the Configure list. For statically assigned settings, do the following: -From the Configure box, select Manually. [. . . ]