User manual ZYXEL PRESTIGE 650H

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZYXEL PRESTIGE 650H. We hope that this ZYXEL PRESTIGE 650H user guide will be useful to you.


ZYXEL PRESTIGE 650H : Download the complete user guide (8309 Ko)

You may also download the following manuals related to this product:

   ZYXEL PRESTIGE 650H (1334 ko)
   ZYXEL PRESTIGE 650H (1226 ko)
   ZYXEL PRESTIGE 650H BROCHURE (419 ko)

Manual abstract: user guide ZYXEL PRESTIGE 650H

Detailed instructions for use are in the User's Guide.

[. . . ] Prestige 650 Series ADSL Router User's Guide Version 3. 40 July 2003 Prestige 650 Series User's Guide Copyright Copyright © 2003 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. [. . . ] Select Disable allows wireless stations to communicate with the access points without any data encryption. EXAMPLE Disable Default Key Enter the number of the key as an active key. Key 1 to If you chose 64-bit WEP in the WEP Encryption field, then enter 5 characters Key 4 or 10 hexadecimal digits ("0-9", "A-F") preceded by 0x for each key (1-4). If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters or 26 hexadecimal digits ("0-9", "A-F") preceded by 0x for each key (1-4). There are four data encryption keys to secure your data from eavesdropping by unauthorized wireless users. The values for the keys must be set up exactly the same on the access points as they are on the wireless station computers. Edit MAC Address Filter To edit MAC address filtering table, press [SPACE BAR] to select Yes and press [ENTER] to open menu 3. 5. 1. No When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen. 17. 3. 1 Wireless LAN MAC Address Filter The next layer of security is MAC address filter. To allow a wireless station to associate with the Prestige, enter the MAC address of the wireless LAN card on that wireless station in the MAC address table. Wireless LAN Setup 17-3 Prestige 650 Series User's Guide Menu 3. 5. 1 - WLAN MAC Address Filter Active= No Filter Action= Allowed Association -----------------------------------------------------------------------------1= 00:00:00:00:00:00 13= 00:00:00:00:00:00 25= 00:00:00:00:00:00 2= 00:00:00:00:00:00 14= 00:00:00:00:00:00 26= 00:00:00:00:00:00 3= 00:00:00:00:00:00 15= 00:00:00:00:00:00 27= 00:00:00:00:00:00 4= 00:00:00:00:00:00 16= 00:00:00:00:00:00 28= 00:00:00:00:00:00 5= 00:00:00:00:00:00 17= 00:00:00:00:00:00 29= 00:00:00:00:00:00 6= 00:00:00:00:00:00 18= 00:00:00:00:00:00 30= 00:00:00:00:00:00 7= 00:00:00:00:00:00 19= 00:00:00:00:00:00 31= 00:00:00:00:00:00 8= 00:00:00:00:00:00 20= 00:00:00:00:00:00 32= 00:00:00:00:00:00 9= 00:00:00:00:00:00 21= 00:00:00:00:00:00 10= 00:00:00:00:00:00 22= 00:00:00:00:00:00 11= 00:00:00:00:00:00 23= 00:00:00:00:00:00 12= 00:00:00:00:00:00 24= 00:00:00:00:00:00 -----------------------------------------------------------------------------Enter here to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 17-2 Menu 3. 5. 1 WLAN MAC Address Filtering The following table describes the fields in this menu. Table 17-2 Menu 3. 5. 1 WLAN MAC Address Filtering FIELD Active Filter Action DESCRIPTION To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER]. Define the filter action for the list of MAC addresses in the MAC address filter table. To deny access to the Prestige, press [SPACE BAR] to select Deny Association and press [ENTER]. The default action, Allowed Association, permits association with the Prestige. Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless station that are allowed or denied access to the Prestige in these address fields. When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen. 17-4 Wireless LAN Setup Prestige 650 Series User's Guide Chapter 18 Internet Access This chapter shows you how to configure the LAN and WAN of your Prestige for Internet access. 18. 1 Internet Access Overview Refer to the chapters on the web configurator's wizard, LAN and WAN screens for more background information on fields in the SMT screens covered in this chapter. 18. 2 IP Policies Traditionally, routing is based on the destination address only and the router takes the shortest path to forward a packet. IP Policy Routing (IPPR) provides a mechanism to override the default routing behavior and alter the packet forwarding based on the policy defined by the network administrator. Policy-based routing is applied to incoming packets on a per interface basis, prior to the normal routing. Create policies using SMT menu 25 (see IP Policy Routing) and apply them on the Prestige LAN and/or WAN interfaces using menus 3. 2 (LAN) and 11. 3 (WAN). 18. 3 IP Alias IP Alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The Prestige supports three logical LAN interfaces via its single physical Ethernet interface with the Prestige itself as the gateway for each LAN network. Internet Access 18-1 Prestige 650 Series User's Guide Figure 18-1 Physical Network Use menu 3. 2. 1 to configure IP Alias on your Prestige. Figure 18-2 Partitioned Logical Networks 18. 4 IP Alias Setup Use menu 3. 2 to configure the first network. Move the cursor to Edit IP Alias field and press [SPACEBAR] to choose Yes and press [ENTER] to configure the second and third network. 18-2 Internet Access Prestige 650 Series User's Guide Menu 3. 2 - TCP/IP and DHCP Setup DHCP Setup: DHCP= Server Client IP Pool Starting Addres= 192. 168. 1. 33 Size of Client IP Pool= 32 Primary DNS Server= 0. 0. 0. 0 Secondary DNS Server= 0. 0. 0. 0 Remote DHCP Server= N/A TCP/IP Setup: IP Address= 192. 168. 1. 1 IP Subnet Mask= 255. 255. 255. 0 RIP Direction= None Version= N/A Multicast= None IP Policies= Edit IP Alias= Yes Press ENTER Press Space Bar to Toggle. to confirm or ESC to Cancel: Figure 18-3 Menu 3. 2 TCP/IP and DHCP Setup Pressing [ENTER] displays Menu 3. 2. 1 -- IP Alias Setup, as shown next. Menu 3. 2. 1 - IP Alias Setup IP Alias 1= No IP Address= N/A IP Subnet Mask= N/A RIP Direction= N/A Version= N/A Incoming protocol filters= Outgoing protocol filters= IP Alias 2= No IP Address= N/A IP Subnet Mask= N/A RIP Direction= N/A Version= N/A Incoming protocol filters= Outgoing protocol filters= N/A N/A N/A N/A Enter here to CONFIRM or ESC to CANCEL: Figure 18-4 Menu 3. 2. 1 IP Alias Setup Follow the instructions in the following table to configure IP Alias parameters. Internet Access 18-3 Prestige 650 Series User's Guide Table 18-1 Menu 3. 2. 1 IP Alias Setup FIELD IP Alias IP Address DESCRIPTION Choose Yes to configure the LAN network for the Prestige. Enter the IP address of your Prestige in dotted decimal notation EXAMPLE Yes 192. 168. 1. 1 255. 255. 255. 0 IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the Prestige RIP Direction Version Press [SPACE BAR] to select the RIP direction. Choices are RIP-1, RIP2B or RIP-2M. None RIP-1 Incoming Enter the filter set(s) you wish to apply to the incoming traffic between Protocol Filters this node and the Prestige. [. . . ] 19-8 Schedule Sets Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Sustain Cell Rate Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4, 9-2, 22-4, 22-5, 22-8, 22-9, 22-10, 22-13, 22-14, 28-5 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5 Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5, 7-6 setup a schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-2 SMTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ZYXEL PRESTIGE 650H




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZYXEL PRESTIGE 650H will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.