User manual ZYXEL P-661HNU

[. . . ] P-661HNU-Fx 801. 11n Wireless ADSL+ 4-port Security Gateway Default Login Details IP Address Admin User https://192. 168. 1. 1 User Name: admin Password: 1234 User Name: user Password: 1234 www. zyxel. com Firmware Version 3. 10 Edition 1, 10/2010 www. zyxel. com Copyright © 2010 ZyXEL Communications Corporation About This User's Guide About This User's Guide Intended Audience This manual is intended for people who want to configure the ZyXEL Device using the web configurator. Related Documentation · Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for Internet access. · Support Disc Refer to the included CD for support documents. Documentation Feedback Send your comments, questions or suggestions to: techwriters@zyxel. com. tw Thank you!The Technical Writing Team, ZyXEL Communications Corp. , 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 30099, Taiwan. Need More Help? More help is available at www. zyxel. com. P-661HNU-Fx User's Guide 3 About This User's Guide · Download Library Search for the latest product updates and documentation from this link. [. . . ] If you select Unchange, the ZyXEL Device keep the DSCP field in the packets. To Queue Select a queue that applies to this class. You should have configured a queue in the Queue Setup screen already. Criteria Configuration Use the following fields to configure the criteria for traffic classification. Basic From Interface Ether Type Select whether the traffic class comes from the LAN or a wireless interface. Select a predefined application to configure a class for the matched traffic. If you select IP, you also need to configure source or destination MAC address, IP address, DHCP options, DSCP value or the protocol type. Source MAC Address MAC Mask Select the check box and enter the source MAC address of the packet. Type the mask for the specified MAC address to determine which bits a packet's MAC address should match. Enter "f" for each bit of the specified source MAC address that the traffic's MAC address should match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can be of any hexadecimal character(s). For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56 matches this criteria. IP Address Select the check box and enter the source IP address in dotted decimal notation. If you select TCP or UDP in the IP Protocol field, select the check box and enter the port number(s) of the source. Select this option to exclude the packets that match the specified criteria from this classifier. IP Subnet Mask Port Range Exclude Destination 184 P-661HNU-Fx User's Guide Chapter 10 Quality of Service (QoS) Table 41 Class Setup: Add/Edit (continued) LABEL MAC Address MAC Mask DESCRIPTION Select the check box and enter the destination MAC address of the packet. Type the mask for the specified MAC address to determine which bits a packet's MAC address should match. Enter "f" for each bit of the specified source MAC address that the traffic's MAC address should match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can be of any hexadecimal character(s). For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56 matches this criteria. IP Address Select the check box and enter the destination IP address in dotted decimal notation. If you select TCP or UDP in the IP Protocol field, select the check box and enter the port number(s) of the source. Select this option to exclude the packets that match the specified criteria from this classifier. This field is available only when you select IP in the Ether Type field. Select this option and select the protocol (service type) from TCP or UDP. If you select User defined, enter the protocol (service type) number. IP Subnet Mask Port Range Exclude Others IP Protocol IP Packet Length This field is available only when you select IP in the Ether Type field. [. . . ] Your use of the ZyXEL Device is subject to the terms and conditions of any related service providers. Certifications Federal Communications Commission (FCC) Interference Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: · This device may not cause harmful interference. · This device must accept any interference received, including interference that may cause undesired operations This device has been tested and found to comply with the limits for a Class B digi- P-661HNU-Fx User's Guide 393 Appendix G Legal Information tal device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]