User manual ZYXEL P-645R-A1

[. . . ] VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) integers. The IP address of the DNS (Domain Name System) server(s) and Gateway (if provided). Preparing Your Network All computers must have a 10M or 100M NIC (Network Interface Card) and TCP/IP installed. TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. [. . . ] For Windows XP, click start, Control Panel, Network and Internet Connections and then Network Connections. Right-click the network connection you want to configure and then click Properties. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties. Click Advanced, IP Settings tab and remove any installed gateways, then click OK. Click OK to save and close the Internet Protocol (TCP/IP) Properties window. In the Command Prompt window, type "ipconfig" and then press ENTER. The window displays information about your IP address, subnet mask and default gateway. Set ting up You r Mac intos h C ompute r Configuring TCP/IP Properties 1. Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel. 2. Verifying TCP/IP Properties Verifying TCP/IP Properties Check your TCP/IP properties in the TCP/IP Control Panel. Accessing the Prestige 1. Type "admin" as the user name, "1234" (default) as the password and press ENTER. Click the help icon (located in the upper right portion of most screens) for online HTML help. Procedure For Web Configurator Configuration Procedure For SMT Configuration via Telnet 1. Type "Telnet" followed by a space and the IP address of the Prestige, (192. 168. 1. 1 is the default) and click OK to display the password screen. Enter "1234", the default password, to access the SMT main menu. As you type a password, the screen displays an "*" (asterisk) for each character you type. Troubleshooting PROBLEM The PWR and/or SYS LED are off. CORRECTIVE ACTION Make sure the Prestige's power adapter is connected to the Prestige and plugged into an appropriate power source. [. . . ] Make sure that the IP address and the subnet mask of the Prestige and the computers are on the same subnet. The WAN IP is provided after the ISP verifies the MAC address, host name or user ID. Find out the verification method used by your ISP and configure the corresponding fields. [. . . ]