User manual ZYXEL P-630-S3

[. . . ] If the setup does not run automatically, double-click Setup. exe from the CD. 2 P-630-S Series Quick Start Guide 3 Wait until you are prompted to connect your Prestige's USB cable to the computer. Connect the USB cable to a USB port on your computer. 4 When the installation is completed, you will see this window. Click OK to close the wizard. 5 Connect the Prestige's DSL port to a telephone jack using the included telephone wire. 3 P-630-S Series Quick Start Guide The USB LED turns on when you have a successful USB connection. The DSL LED blinks during DSL line initialization and turns steady green when the Prestige has a DSL connection. [. . . ] Select a PPPoE or PPPoA profile and click Reinstall. 3 The dial-up icon appears on your desktop. 4 Double-click the icon to configure your user name and password for Internet access. Enter the user name and password that your ISP gave you and click Dial. 12 P-630-S Series Quick Start Guide 2. 1. 2 Mac Mac OS 9 1 Click the Apple icon, Control Panels and ADSL Modem to start the configuration wizard. 2 Click the Config tab, select a profile and click Save. 3 Click the Apple icon, Control Panels and TCP/IP. 13 P-630-S Series Quick Start Guide 4 In the TCP/IP screen, select PPP in the Connect via field. Select Using PPP Server in the Configure field or select Manually and enter the IP address given by your ISP. Click the close button at the top left corner and click Save. 5 Click the Apple icon, Control Panels and Modem. 6 Select PPPoA ADSL modem or PPPoE ADSL modem in the Connect via field and ADSL Modem Script in the Modem field. Click the close button at the top left corner and click Save. 7 Click the Apple icon, Control Panels and Remote Access. 14 P-630-S Series Quick Start Guide 8 Select Registered User, enter the user name and password that your ISP gave you, enter any number in the Number field and click Connect. Mac OS X 1 Click Finder, Applications and ADSL Modem. 2 Double-click ADSL Modem to start the configuration wizard. 15 P-630-S Series Quick Start Guide 3 Click the Config tab, select a PPPoE or PPPoA profile and click Save. 4 Click the Apple icon and System Preferences. 5 Double-click Network. 6 A New Port Detected screen opens when the computer detects that the ADSL link is up. Click OK. 16 P-630-S Series Quick Start Guide 7 In the Network screen, select Ethernet Adaptor (en x) in the Show field. Type the information from your ISP in the Service Provider, Account Name, Password and PPPoE Service Name fields. Click Apply Now. 8 Click the PPPoE status menu bar icon at the right corner and select Connect. 2. 2 Setting up Your Computer's IP Address Note: This section shows you how to configure an IP address on your computer. You only need to do this if you were given an IP address by your ISP. 2. 2. 1 Windows Screens for Windows XP are shown in this guide unless otherwise specified. 1 Click Start, Control Panel and Network Connections. 17 P-630-S Series Quick Start Guide 2 Right-click on the icon that corresponds to your new USB connection (not the one that corresponds to your network card) and select Properties. 3 In the Properties screen, make sure the Connect using field displays "LAN/ATM/ADSL miniport". Select Internet Protocol (TCP/IP) and click Properties. 18 P-630-S Series Quick Start Guide 4 Click Use the following IP Address and fill in the IP address, Subnet mask and Default gateway (given by your ISP) fields. Click OK. 2. 2. 2 Mac Mac OS 9 1 Click the Apple icon, Control Panels and TCP/IP. 2 In the TCP/IP screen, select PPP, Routed ADSL Modem or Bridged ADSL Modem in the Connect via field and Manually in the Configure field. Fill in the IP address, Subnet mask and Router address (given by your ISP) fields. Click the close button at the top left corner and click Save. 19 P-630-S Series Quick Start Guide Mac OS X 1 Click the Apple icon, System Preferences and Network to open the Network screen. 2 Select Ethernet Adaptor (en x) that corresponds to your new USB connection in the Show field. Click the TCP/IP tab and select Manually in the Configure IPv4 dropdown list box. [. . . ] Perform a hardware scan by clicking Start, Settings, Control Panel and double-clicking Add/Remove Hardware. Follow the on-screen instructions to search for the Prestige and install the driver. In Windows, click Start, Settings, Control Panel, System, Hardware and then click Device Manager. [. . . ]