User manual ZYXEL OMNI 56K COM PLUS

[. . . ] A computer with COM (Communication) ports. 3 Hardware Installation 3 Omni 56K Plus Modem Quick Start Guide 3. 1 USB Plus The Front Panel LEDs LED USB FUNCTION USB Indicator Hook Status STATUS ON OFF ON OFF DESCRIPTION The USB link is on. The phone is in on-hook status (the telephone line is available) There is data transmission. The carrier is not detected. OH DATA Data transmission Carrier Detect ON OFF ON OFF CD Making USB Connections 1. Connect one end of your USB cable to your USB Plus and the other end to your computer's USB port. 4 Omni 56K Plus Modem Quick Start Guide Figure 1 USB Cable (Type A) Computer End Figure 2 USB Cable (Type B) Device End Figure 3 Rear Panel Connections 3. 2 COM Plus The Front Panel LEDs LED HS FUNCTION V. 92 Ready STATUS ON OFF DESCRIPTION A V. 92 modem link is established. [. . . ] Windows 98 SE/Me: Select The updated driver (Recommended) and click Next to continue. 5. Windows 98 SE/Me/2000: The installation wizard has found the location of your USB driver. Click Next to continue and Windows will copy the driver files into your system as well as build the driver information database. After the ZyXEL Omni 56K USB Plus modem has been installed successfully, click Finish to complete the driver installation. 6. Manual Installation Screens for Windows 2000 are shown here. Double-click on the Phone and Modem Options icon (or the Modems icon) as shown, click the Modems tab and the Add button. 9 Omni 56K Plus Modem Quick Start Guide 3. Click Next to continue. 4. Windows XP: Please wait for few minutes while Windows detects the modem. 5. 6. Follow the procedures of Plug and Play installation to finish the driver installation. After the ZyXEL Omni 56K USB Plus modem has been installed successfully, click Finish. 4. 2 COM Plus Follow the steps below to install your COM Plus modem driver. Double-click on the Phone and Modem Options icon (or the Modems icon) as shown, click the Modems tab and the Add button. Click Next to continue. 3. 4. Please wait while Windows detects the modem. 5. Click Next to continue. If it doesn't, you may unplug the RS-232 cable and plug it in again. If this does not work, unplug the cable and restart your computer, then plug the cable back in. 11 Omni 56K Plus Modem Quick Start Guide 6. Click Next to accept the default selection. 7. Windows 95/98 SE/Me/2000: If you insert the CD included into your CD-ROM drive, select CDROM drives and then click Next. If you have the driver stored on your computer, select Specify a location, click Next, Browse to find the INF file you want to upload and then click OK. Remember that you must decompress compressed (. zip) files before you can upload them. Windows 95/98 SE/Me/2000: The installation wizard has found the location of your driver. Click Next to continue and Windows will copy the driver files into your system as well as build the driver information database. After the ZyXEL Omni 56K COM Plus modem has been installed successfully, click Finish. 5 Dial-up Networking Use the connection wizard to setup your dial-up networking connection. Windows 98SE/Me: Click Start, Programs, Accessories, Communications, Dial-up Networking, double-click Make New Connection. Windows 2000: Click Start, Settings, Network and Dial-up Connections, Make New Connection. Windows XP: Click Start, Programs, Accessories, Communications, New Connection Wizard. 13 Omni 56K Plus Modem Quick Start Guide 2. [. . . ] Carefully follow the instructions to uninstall and reinstall the software driver. Click Start, Control Panel, double-click Phone and Modem Options (or Modems). Make sure the Line port is properly connected to the phone jack with a telephone wire. Check the telephone wire (use it to plug the phone directly into the wall jack for a dial tone or try using a different one). [. . . ]