User manual ZYXEL NWD-210N

[. . . ] NWD210N Wireless N USB Adapter User's Guide Version 1. 0 11/2007 Edition 1 www. zyxel. com About This User's Guide About This User's Guide Intended Audience This manual is intended for people who want to configure the NWD210N using the ZyXEL utility. You should have at least a basic knowledge of TCP/IP networking concepts and topology. Related Documentation · Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for Internet access. [. . . ] This field is not available when you select TLS in the EAP Type field. This field is only available when you select TLS in the EAP Type field. Click Browse to select a certificate. EAP Type Login Name Password Certificate Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA). Consult your network administrator for more information. Validate Server Certificate PEAP Inner EAP Select this to verify the certificate of the authentication server. If you select this and click Next, the Server Certificate Setting screen displays. This field is only available when you select PEAP in the EAP Type field. The PEAP method used by the RADIUS server or AP for client authentication is MS CHAP v2. This field is available only when you select TTLS in the EAP Type field. Click Back to go to the Site Survey screen to select and connect to another network. Click Next to confirm your selections and advance to the Summary screen (refer to Section 4. 3. 3 on page 55. ) If you selected Validate Server Certificate, the Server Certificate Setting screen displays (refer to Section 4. 3. 2 on page 55). Click Exit to return to the Site Survey screen without saving. TTLS Protocol Back Next Exit NWD210N User's Guide 53 Chapter 4 Wireless Configuration 4. 3. 1. 4 IEEE 802. 1x Configure IEEE 802. 1x security with various authentication methods in this screen. The procedure to configure 802. 1x is different in Windows Vista. See Section 4. 6 on page 64 for information on setting up your NWD210N to use 802. 1x in Vista. Figure 32 Security Setting: 802. 1x The following table describes the labels in this screen. Table 11 Security Settings: IEEE 802. 1x LABEL Encryption Type DESCRIPTION Select WEP if the access point is configured to use 802. 1x with WEP encryption. Otherwise, select Disable (at the time of writing, this is not available in Windows Vista). The type of authentication you use depends on the RADIUS server or AP. Options are TLS, PEAP and TTLS (at the time of writing, TTLS is not available in Windows Vista). This is the user name that you or an administrator set up on a RADIUS server. This field is not available when you select TLS in the EAP Type field. This field is only available when you select TLS in the EAP Type field. Click Browse to select a certificate. EAP Type Login Name Password Certificate Note: You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA). Consult your network administrator for more information. Validate Server Certificate PEAP Inner EAP Select this to verify the certificate of the authentication server. If you select this and click Next, the Server Certificate Setting screen displays. This field is only available when you select PEAP in the EAP Type field. [. . . ] 2 Select your product on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page. ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two years from the date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. [. . . ]