User manual ZYXEL NWA3560-N

[. . . ] NWA3000-N Series Wireless N Business WLAN 3000 Series Access Point Default Login Details IP Address User Name Password https://192. 168. 1. 2 admin 1234 Version 2. 23 www. zyxel. com Edition 1, 1/2011 www. zyxel. com Copyright © 2011 ZyXEL Communications Corporation About This User's Guide About This User's Guide Intended Audience This manual is intended for people who want to configure a NWA3000-N series AP using the web configurator. You should have at least a basic knowledge of TCP/IP networking concepts and topology. Related Documentation • Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for Internet access. • ZyXEL Web Site Please refer to www. zyxel. com for additional support documentation and product certifications. User Guide Feedback Help us help you. [. . . ] Click Cancel to quit and return to the previous screen. 14. 4 Technical Reference The following section contains additional technical information about the features described in this chapter. OCSP OCSP (Online Certificate Status Protocol) allows an application or device to check whether a certificate is valid. With OCSP the NWA3000-N series AP checks the status of individual certificates instead of downloading a Certificate Revocation List (CRL). The second is a reduction in network traffic since the NWA3000-N series AP only gets information on the certificates that it needs to verify, not a huge list. When the NWA3000-N series AP requests certificate status information, the OCSP server returns a “expired”, “current” or “unknown” response. NWA3000-N Series User’s Guide 191 Chapter 14 Certificates 192 NWA3000-N Series User’s Guide CHAPTER 15. 1 Overview 15 System Use the system screens to configure general NWA3000-N series AP settings. 15. 1. 1 What You Can Do in this Chapter • The Host Name screen (Section 15. 2 on page 194) configures a unique name for the NWA3000-N series AP in your network. • The Date/Time screen (Section 15. 3 on page 194) configures the date and time for the NWA3000-N series AP. • The Console Speed screen (Section 15. 4 on page 199) configures the console port speed when you connect to the NWA3000-N series AP via the console port using a terminal emulation program. • The WWW screens (Section 15. 5 on page 200) configure settings for HTTP or HTTPS access to the NWA3000-N series AP. • The SSH screen (Section 15. 6 on page 209) configures SSH (Secure SHell) for securely accessing the NWA3000-N series AP’s command line interface. • The Telnet screen (Section 15. 7 on page 214) configures Telnet for accessing the NWA3000-N series AP’s command line interface. • The FTP screen (Section 15. 8 on page 215) specifies FTP server settings. You can upload and download the NWA3000-N series AP’s firmware and configuration files using FTP. Please also see Chapter 17 on page 241 for more information about firmware and configuration files. • The SNMP screens (Section 15. 9 on page 217) configure the device’s SNMP settings, including profiles that define allowed SNMPv3 access. Server screens (Section 15. 10 on page 221) configure settings for the NWA3000-N series AP’s built-in authentication server. NWA3000-N Series User’s Guide 193 Chapter 15 System 15. 2 Host Name A host name is the unique name by which a device is known on a network. Click Configuration > System > Host Name to open this screen. Figure 84 Configuration > System > Host Name The following table describes the labels in this screen. Table 69 Configuration > System > Host Name LABEL System Name DESCRIPTION Choose a descriptive name to identify your NWA3000-N series AP device. Spaces are not allowed, but dashes (-) underscores (_) and periods (. ) are accepted. This name is propagated to DHCP clients connected to interfaces with the DHCP server enabled. Click Reset to return the screen to its last-saved settings. Domain Name Apply Reset 15. 3 Date and Time For effective scheduling and logging, the NWA3000-N series AP system time must be accurate. The NWA3000-N series AP has a software mechanism to set the time manually or get the current time and date from an external server. 194 NWA3000-N Series User’s Guide Chapter 15 System To change your NWA3000-N series AP’s time based on your local time zone and date, click Configuration > System > Date/Time. You can manually set the NWA3000-N series AP’s time and date or have the NWA3000-N series AP get the date and time from a time server. Figure 85 Configuration > System > Date/Time The following table describes the labels in this screen. Table 70 Configuration > System > Date/Time LABEL Current Time and Date Current Time Current Date Time and Date Setup Manual Select this radio button to enter the time and date manually. If you configure a new time and date, time zone and daylight saving at the same time, the time zone and daylight saving will affect the new time and date you entered. When you enter the time settings manually, the NWA3000-N series AP uses the new setting once you click Apply. [. . . ] Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 4 FCC Radiation Exposure Statement • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. • For operation within 5. 15 ~ 5. 25GHz frequency range, it is restricted to indoor environment. • IEEE 802. 11b or 802. 11g operation of this product in the U. S. A. [. . . ]