User manual ZYXEL GS-1116

[. . . ] To obtain the services of this warranty, contact ZyXEL's Service Center for your Return Material Authorization number (RMA). Any returned products without proof of purchase or those with an outdated warranty will be repaired or replaced (at the discretion of ZyXEL) and the customer will be billed for parts and labor. All repaired or replaced products will be shipped by ZyXEL to the corresponding return address, Postage Paid. This warranty gives you specific legal rights, and you may also have other rights that vary from country to country. ZyXEL Limited Warranty iii Dimension GS-1116/GS-1124 Gigabit Switch Interference Statements and Warnings FCC Interference Statement This device complies with Part 15 of the FCC rules. [. . . ] The "Super User" workgroup runs bandwidth-hungry applications like large FTP file transfers and real time applications such as video conferencing. The switch automatically learns node addresses, which are subsequently used to filter and forward all traffic based on the destination address. You can use the Mini GBIC slots to connect with a fiber optic network that extends your Ethernet network and to separate "Normal User" and "Super User" networks. 1-4 Getting to Know the GS1116/GS-1124 Dimension GS-1116/GS-1124 Gigabit Switch Figure 1-4 Gigabit Switch for Super User Work Groups Getting to Know the GS1116/GS-1124 1-5 Dimension GS-1116/GS-1124 Gigabit Switch Chapter 2 Hardware Description and Installation This section discusses switch installations, hardware and functional overview. The switch is suited to an office environment where it can be rack mounted on standard EIA racks or placed as a standalone switch on a desktop. For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front, 3. 4 inches (8 cm) at the back of the switch. This is especially important for enclosed rack installations. 2. 1 Desktop Installation 1. Set the switch upside-down on a study level space with a power outlet nearby. Make sure there is enough clearance around the switch to allow air circulation and the attachment of cables and the power cord. 3. These rubber feet help protect the switch from shock or vibration and ensure space between devices when stacking. 5. Turn the switch right side up after you attach the rubber feet. Figure 2-1 Attaching Rubber Feet Hardware Description and Installation 2-1 Dimension GS-1116/GS-1124 Gigabit Switch Do not block the ventilation holes. Leave space between switches when stacking. 2. 2 Rack-mounted Installation The switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other equipment. Follow the steps below to mount your switch on a standard EIA rack using the included rack-mounting kit. 1. Align one bracket with the holes on one side of the switch and secure it with the bracket screws. Similarly, attach the other bracket. Figure 2-2 Attaching Mounting Brackets and Screws 2. After attaching both mounting brackets, position the switch in the rack by lining up the holes in the brackets with the appropriate holes on the rack. Secure the switch to the rack with the rack's mounting screws. Figure 2-3 Switch Mounting to an EIA Standard 19-inch Rack 2-2 Hardware Description and Installation Dimension GS-1116/GS-1124 Gigabit Switch 2. 3 Rear Panel The ventilation fan and three-pronged power receptacle are located on the rear panel of the switch. Figure 2-4 GS-1116/GS-1124 Rear Panel 2. 3. 1 Rear Panel Power Connection Connect one end of the supplied power cord to the power receptacle on the back of the switch and the other end to the 100-240 VAC, 50-60 Hz power source. Push the power switch to the ON position. 2. 4 Front Panel The following graphics show the front panels of the GS-1116 and the GS-1124. Figure 2-5 GS-1116 Front Panel Figure 2-6 GS-1124 Front Panel Table 2-1 GS-1116/GS-1124: Front Panel Ports CONNECTOR 1-16 and 1-24 RJ-45 ports 17 - 18 and 25 - 26 mini GBIC ports DESCRIPTION Connect these 100/1000 Mbps RJ-45 Ethernet ports to computers, hubs, Ethernet switches or routers. Use mini GBIC transceivers in these ports for fiber-optical connections to backbone Ethernet switches. 2. 4. 1 100/1000Mbps RJ-45 Auto-negotiating Ports The GS-1116 has 16 100/1000 Mbps RJ-45 ports. The auto-negotiation feature allows the switches to detect the speed of incoming transmission and adjust appropriately without manual intervention. It allows data transfers of either · 100Mbps in half-duplex mode Hardware Description and Installation 2-3 Dimension GS-1116/GS-1124 Gigabit Switch · 100Mbps or 1000Mbps in full-duplex mode depending on your Ethernet network. 2. 4. 2 Auto-sensing (Auto MDI/MDIX) Ports You can connect each RJ-45 auto-sensing port to a computer, hub or switch using either a straight through or a crossover Ethernet cable. 2. 4. 3 Mini GBIC Slots These are slots for Mini GBIC (Gigabit Interface Converter) transceivers. A transceiver is a single unit that houses a transmitter and a receiver. You must use transceivers that comply with the Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA). See the SFF committee's INF-8074i specification Rev 1. 0 for details. [. . . ] 5 cable EIA/TIA 568 100Ohm(100M) Network Cables Performance and Management Packet Forwarding Rate Switching Method MAC Address Table (Auto-learning) 148800PPS for 100BASE-TX 1488000PPS for 1000BASE-T Store-and-forward GS-1116: 4K entries GS-1124: 4K entries GS-1116: 2Mbits GS-1124: 2Mbits Bridging: 4K MAC addresses Switching fabric: GS-1116: 32Gbps Data Buffer Layer 2 features GS-1124: 48Gbps IEEE802. 1p egress, two priority queues Support Frame size: 1522 bytes Broadcast storm control Physical Environment Weight Main switch: GS-1116: 3. 5Kg, GS-1124: 3. 5Kg Product Specifications A Dimension GS-1116/GS-1124 Gigabit Switch SYSTEM PWR (Green): On/Off 16/24 x 1000BASE-T ETHERNET PORTS 1000 (Green): On/Off LED LNK/ACT (Link/Activity), (Green): On/Blinking/Off FDX/COL (Full-duplex), (Yellow): On/Blinking/Off MINI-GBIC SLOTS LNK (Green): On/Off ACT (Green): Blinking Dimensions Power Supply Power Consumption Operating Temperature Operational Humidity EMI Safety 440(W) x 161(D) x 44(H) mm 19" rack mountable enclosure 100 - 240V AC, 50/60Hz internal universal power supply GS-1116: 47W max GS-1124: 69W max 0ºC to 45ºC (32ºF to 113ºF) 10% to 90% (Non-condensing) FCC Class A, CE, C-Tick for NZ/AUS UL, cUL B Product Specifications Dimension GS-1116/GS-1124 Gigabit Switch Index 1000/ 100 Ethernet LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 FCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]