User manual ZYXEL G-360 V2.10 QUICK START GUIDE

[. . . ] Select Search for the best drive for your device then select only Removable Media (Floppy, CDROM . to have OTIST automatically generate a WPA-PSK key , select the Yes check box. If you manually configured a WEP key or a WPA-PSK key and you also selected this check box, then the key you manually configured is used. [. . . ] 1 In the AP, a web configurator screen pops up showing you the security settings to transfer. 1 After you have successfully installed the driver, reinsert the support CD into the CD-ROM drive on your computer. 2 Turn off the computer and peripheral device(s) , such as the printer. 3 Ground yourself by wearing an anti-static wrist strap or touching a metal object. Make sure the ZyXEL G-360's contacts are fully seated in the PCI slot. In the wireless client, you see this screen if it can't find an OTISTenabled AP (with the same Setup key). If there is more than one OTIST-enabled AP within range, you see a screen asking you to select one AP to get settings from. In a wireless network, the wireless clients must have the same SSID and security settings as the access point (AP) or wireless router (we will refer to both as "AP" here) in order to associate with it. Traditionally this meant that you had to configure the settings on the AP and then manually configure the exact same settings on each wireless client. OTIST (One-Touch Intelligent Security Technology) allows you to transfer your AP's SSID and WEP or WPAPSK security settings to wireless clients that support OTIST and are within transmission range. You can also choose to have OTIST generate a WPA-PSK key for you if you didn't configure one manually. 1 If you enabled OTIST in the wireless client, you see this screen each time you start the ZyXEL Utility. 2 If an OTIST-enabled wireless client loses its wireless connection for more than ten seconds, it will search for an OTIST-enabled AP for up to one minute. (If you manually have the wireless client search for an OTIST-enabled AP, there is no timeout; click Cancel in the OTIST progress screen to stop the search. [. . . ] If you hold in the Reset button too long, the device will reset to the factory defaults!Search for the best drive for your device ( ), Removable Media (Floppy, CD-ROM ) ( ( , CD-ROM )) Next (). Search for the best drive in these locations ( ) Search removable media (Floppy, CD-ROM ) ( ( , CD-ROM)), Next (). [. . . ]