User manual ZYXEL DMA-1000

[. . . ] DMA-1000 Series Digital Media Adapter User's Guide Version 1. 00 3/2007 Edition 2 www. zyxel. com About This User's Guide About This User's Guide Intended Audience This manual is intended for people who want to use and configure the DMA-1000 or DMA1000W. Related Documentation Quick Start Guide The Quick Start Guide is designed to help you get up and running right away. It contains information on setting up your network and configuring for Internet access. Supporting Disk Refer to the included CD for software and support documents. [. . . ] If you do not know your gateway's IP address, remove previously installed gateways. If you have a gateway IP address, type it in the New gateway field and click Add. 7 Turn on your DMA and restart your computer when prompted. Verifying Settings 1 Click Start and then Run. 2 In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. You should see your computer's IP address, subnet mask and default gateway. Windows 2000/NT/XP The following example figures use the default Windows XP GUI theme. 1 Click start (Start in Windows 2000/NT), Settings, Control Panel. 96 DMA-1000 Series User's Guide Appendix C Setting up Your Computer's IP Address Figure 49 Windows XP: Start Menu 2 In the Control Panel, double-click Network Connections (Network and Dial-up Connections in Windows 2000/NT). Figure 50 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties. DMA-1000 Series User's Guide 97 Appendix C Setting up Your Computer's IP Address Figure 51 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and then click Properties. Figure 52 Windows XP: Local Area Connection Properties 5 The Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP). If you have a dynamic IP address click Obtain an IP address automatically. If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. Click Advanced. 98 DMA-1000 Series User's Guide Appendix C Setting up Your Computer's IP Address Figure 53 Windows XP: Internet Protocol (TCP/IP) Properties 6 If you do not know your gateway's IP address, remove any previously installed gateways in the IP Settings tab and click OK. In TCP/IP Address, type an IP address in IP address and a subnet mask in Subnet mask, and then click Add. Configure additional default gateways in the IP Settings tab by clicking Add in Default gateways. In TCP/IP Gateway Address, type the IP address of the default gateway in Gateway. To manually configure a default metric (the number of transmission hops), clear the Automatic metric check box and type a metric in Metric. Repeat the previous three steps for each default gateway you want to add. Click OK when finished. Do one or more of the following if you want to configure additional IP addresses: DMA-1000 Series User's Guide 99 Appendix C Setting up Your Computer's IP Address Figure 54 Windows XP: Advanced TCP/IP Properties 7 In the Internet Protocol TCP/IP Properties window (the General tab in Windows XP): Click Obtain DNS server address automatically if you do not know your DNS server IP address(es). If you know your DNS server IP address(es), click Use the following DNS server addresses, and type them in the Preferred DNS server and Alternate DNS server fields. If you have previously configured DNS servers, click Advanced and then the DNS tab to order them. 100 DMA-1000 Series User's Guide Appendix C Setting up Your Computer's IP Address Figure 55 Windows XP: Internet Protocol (TCP/IP) Properties 8 Click OK to close the Internet Protocol (TCP/IP) Properties window. 9 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window. 10 Close the Network Connections window (Network and Dial-up Connections in Windows 2000/NT). 11 Turn on your DMA and restart your computer (if prompted). Verifying Settings 1 Click Start, All Programs, Accessories and then Command Prompt. 2 In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open Network Connections, right-click a network connection, click Status and then click the Support tab. Windows Vista This section shows screens from Windows Vista Enterprise Version 6. 0. [. . . ] Operation of this device in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Taiwanese BSMI (Bureau of Standards, Metrology and Inspection) A Warning: Notices Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. [. . . ]