User manual ZOTAC H61MAT-D-E

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZOTAC H61MAT-D-E. We hope that this ZOTAC H61MAT-D-E user guide will be useful to you.


ZOTAC H61MAT-D-E : Download the complete user guide (3404 Ko)

Manual abstract: user guide ZOTAC H61MAT-D-E

Detailed instructions for use are in the User's Guide.

[. . . ] CAUTION: Risk of explosion if the battery is replaced with an incorrect type. Disposal of used batteries must be in accordance with local environmental regulations. 1 Intel H61-MATX series Motherboard Table of Contents Motherboard Specifications----------------------------------------------------------------------------------4 Motherboard Layout--------------------------------------------------------------------------------------------6 Hardware Installation-------------------------------------------------------------------------------------------8 Safety Instructions-------------------------------------------------------------------------------------------8 Preparing the Motherboard--------------------------------------------------------------------------------9 Installing the CPU---------------------------------------------------------------------------------------9 Installing the CPU Fan---------------------------------------------------------------------------------10 Installing Memory Modules---------------------------------------------------------------------------10 Installing the Motherboard---------------------------------------------------------------------------------11 Installing the I/O Shield--------------------------------------------------------------------------------11 Securing the Motherboard into the Chassis------------------------------------------------------11 Connecting Cables and Setting Switches--------------------------------------------------------------12 24-pin ATX Power Connector-PW1-----------------------------------------------------------------13 4-pin ATX_12V power connector-PW2------------------------------------------------------------13 Front Panel Header-FP1------------------------------------------------------------------------------14 Speaker Header-SPEAKER--------------------------------------------------------------------------14 USB Headers-FP_U1/2--------------------------------------------------------------------------------15 Front Pannel Audio Header-FP_S------------------------------------------------------------------15 Serial-ATA (SATA) Connectors (SATA1/2/3/4)---------------------------------------------------16 Fan Connectors-----------------------------------------------------------------------------------------16 Expansion Slots-----------------------------------------------------------------------------------------17 Jumper Settings-----------------------------------------------------------------------------------------17 Configuring the BIOS-------------------------------------------------------------------------------------------18 Enter BIOS Setup--------------------------------------------------------------------------------------------18 Main Menu-----------------------------------------------------------------------------------------------------18 Advanced Menu----------------------------------------------------------------------------------------------19 CPU Configuration--------------------------------------------------------------------------------------19 Storage Configuration----------------------------------------------------------------------------------20 USB Configuration--------------------------------------------------------------------------------------20 F71808A Super IO Configuration-------------------------------------------------------------------21 H/W Monitor----------------------------------------------------------------------------------------------21 ACPI Settings--------------------------------------------------------------------------------------------21 Chipset Menu--------------------------------------------------------------------------------------------------22 PCH-IO Configuration----------------------------------------------------------------------------------22 Graphics Configuration--------------------------------------------------------------------------------22 NB PCIe Configuration--------------------------------------------------------------------------------22 Boot Menu------------------------------------------------------------------------------------------------------23 Boot Settings Configuration--------------------------------------------------------------------------23 Security Menu-------------------------------------------------------------------------------------------------24 2 Table of Contents Administrator Password-------------------------------------------------------------------------------24 User Password-------------------------------------------------------------------------------------------24 Save & Exit Menu--------------------------------------------------------------------------------------------25 Save Changes and Exit-------------------------------------------------------------------------------25 Discard Changes and Exit----------------------------------------------------------------------------26 Save Changes and Reset-----------------------------------------------------------------------------26 Discard Changes and Reset-------------------------------------------------------------------------26 Save Changes-------------------------------------------------------------------------------------------26 Discard Changes----------------------------------------------------------------------------------------26 Restore Defaults----------------------------------------------------------------------------------------26 Save as User Defaults---------------------------------------------------------------------------------26 Restore User Defaults---------------------------------------------------------------------------------26 Flash Update Procedure -----------------------------------------------------------------------------------27 Installing Drivers and Software-----------------------------------------------------------------------------28 Drivers Installation -------------------------------------------------------------------------------------------28 3 Intel H61-MATX series Motherboard Motherboard Specifications q Chipset v Intel® H61 Chipset q Size v MATX form factor of 170mm X 235mm q Microprocessor support v upports LGA 1155 Socket for 2nd/3rd Generation Intel® Core (support up to 95W CPU) S q Operating systems v upports Windows XP 32bit/64bit, Windows Vista 32bit/64bit and Windows 7 32bit/64bit S q System Memory v upports 1 GB, 2 GB, 4 GB and 8 GB DDR3 DRAM devices S v upports Dual Channel DDR3 1066 and 1333 MT/s S v aximum memory size: 16 GB M q SB 2. 0 ports U v upports hot plug and play S v Eight USB 2. 0 ports (four ports on the back panel, four via the USB brackets connected to the internal USB headers) v upports USB 2. 0 protocol up to 480 Mbps transmission rate S q nboard Serial ATA ports O v ndependent DMA operation on four ports I v Four SATAII ports (3. 0 Gb/s) q Onboard LAN v Support Full Duplex flow control (IEEE802. 3x) v 0/100 BASE-T IEEE 802. 3 compliant (optional with Gigabit Lan) 1 v ake On LAN (WOL) power management support W q Audio v 6 channel High Definition Audio v ll DACs support 192k/96k/48k/44. 1kHz sample rate A q Green Function v upport SMM, APM, ACPI S v uspend to DRAM supported (STR) S v C power failure recovery A 4 Motherboard Specifications q CI Express Interface P v upports PCI Express 2. 0 S v ake up function is supported W v lock spread spectrum capability C q Expansion slots v ne PCI Express x16 slot O v Two PCI Express x1 slots 5 Intel H61-MATX series Motherboard Motherboard Layout 13 K/B PW2 Figure 1 shows the motherboard and Figure 2 shows the back panel connectors. 14 15 16 120 240 121 120 240 CPUFAN COM VGA 115XLM 12 1. 5V DDRIII1 DDRIII2 USB2. 0 1. 5V 1 USB2. 0 LAN1 AUDIO 121 PW1 11 10 FP-S PCIE1 PCIE2 9 PCIE3 SATA1 Chipset SATA2 SATA3 SATA4 S-FAN1 2 3 FP_U2 FP_U1 JP1 SPEAKER FP1 8 Figure 1. Board Layout 1. 24-pin ATX Power Connector-PW1 7 Figure 1 6 5 4 2. 3. 4. 5. 6. 7. 8. Chipset Serial-ATA Connectors (SATA1/2/3/4) Front Panel Header-FP1 Speaker Header-SPEAKER Clear CMOS Jumper-JP1 USB2. 0 Headers (FP_U1/2) SYS Fan Connector-S-FAN1 9. PCI Express x1 Slots-PCIE2/3 10. PCI Express x16 Slot-PCIE1 11. Front Pannel Audio Header-FP_S 12. Backpanel Connectors 13. 4-pin ATX_12V Power Connector-PW2 14. CPU Socket 15. CPU Fan Connector_CPUFAN 16. DDRIII DIMM Sockets-DDRIII1~2 6 Rear panel Figure 2. Backpanel connectors 7 5 10 15 11 6 2 1. PS2 Mouse Port 2. PS2 Keyboard Port 3. COM Port 4. VGA Port 5. USB 2. 0 Ports 6. ort P Blue Green Pink 3 4 5 6 2-Channel Line-In Line-Out Mic In 4-Channel Rear Speaker Out Front Speaker Out Mic In 6-Channel Rear Speaker Out Front Speaker Out Center/Subwoofer 7. [. . . ] 2. Press the Del key when the following message briefly displays at the bottom of the screen during the Power On Self Test (POST). We reserve the right to update the BIOS version presented in the manual. It is strongly recommended that you do not change the default BIOS settings. Changing some settings could damage your system. This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. Main Menu Note: Users please note that the data in gray is non-changeable, and the others are for selection. q BIOS Information Displays the auto-detected BIOS information. 18 Configuring the BIOS q System Language Choose the system default language. q System Date/Time Allows you to set the system date/time. Advanced Menu The Advanced menu items allow you to change the setting for the CPU and other system devices. Press <enter> to display the configuration options: CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Press <enter>to display the configuration options: q Active Processor Cores This item allows you to choose the number of the active processor cores. q Limit CPUID Maximum Allows you to determine whether to limit CPUID maximum value. Set this item to [Disable] Windows XP operating system; set this item to [Enable] for legacy operating system such as Windows NT4. 0. . q Execute Disable Bit When disabled forces the XD feature flag to always return 0, defaults choose [Enable]. 19 Intel H61-MATX series Motherboard q Intel Virtualization Technology Hardware Virtualization Technology enables processor feature for running multiple simultaneous virtual machines allowing specialized software applications to run in full isolation of each other. q Hardware Prefetcher Use this item to enable or disable hardware prefetcher (hardware prefetch mechanism). q Adjacent Cache Line Prefetch Use this item to enable or disable the adjacent cache line prefetch mode. If you disable this item, only one 64-bit line will be prefetched from the 128-bit section (including the required data). If you enable this item, two lines will be prefetched whether there is required data or not. Storage Configuration The items in this menu allow you to set or change the storage configurations. Press <enter>to display the configuration options: q SATA Controllers Use this item to enable or disable SATA controllers. q SATA Mode Selection Allows you to choose SATA mode, including [Disabled], [IDE Mode], and [AHCI Mode]. Press <enter> To display the configuration options: q Legacy USB Support Allows you to enable or disable support for USB devices on legacy operating systems. q EHCI Hand-Off Allows you to enable support for operating systems without an EHCI hand-off feature. q Device power-up delay Allows you to set device power-up delay. USB Configuration 20 Configuring the BIOS F71808A Super IO Configuration The items in this menu allow you to configure F71808A Super IO Chipset. q Serial Port 0 Information Press [Enter] to display the serial port information. H/W Monitor The items in this menu allow you to monitor the hardware status. Press <enter>to display the configuration options: q CPU FAN Mode Use this item to select CPU FAN mode, the default value is [Full Speed Mode]. ACPI Settings The items in this menu allow you to set ACPI Configuration. [. . . ] Copy the new BIOS file (just obtained or downloaded) and the utility program EFUDOS. exe to the diskette. At the DOS prompt, type EFUDOS XX. ROM /P /B /N <ENTER> Note: XX (the BIOS file name) can be defined by users. Warning: - Do not turn off or RESET the computer during the flash process. - If you are not sure how to upgrade the BIOS, please take your computer to an Authorized Service Center and have a trained technician do the work for you. 27 Intel H61-MATX series Motherboard Installing Drivers and Software Note: It is important to remember that before installing the driver disk that is shipped in the kit, you need to load your operating system. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ZOTAC H61MAT-D-E




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZOTAC H61MAT-D-E will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.