User manual ZEISS AXIOSKOP 2 PLUS INSERTING RETICLE

[. . . ] Axioskop 2 plus Axioskop 2 mot plus START-UP Initial start-up Carl Zeiss Inserting the eyepiece reticle The eyepieces PL 10x/23 Br. [. . . ] To replace an eyepiece reticle, only remove screwin mount (2-4/2) with eyepiece reticle (2-4/1) and replace it with a screw-in mount containing the required eyepiece reticle. Fig. 2-4 Inserting the eyepiece reticle If eyepiece reticles are inserted into the unscrewed mount by the customer, attention must be paid to the labelling being visible the right way up after insertion. Compensation of ametropia when eyepiece reticles are used The correct use of an eyepiece reticle requires two focusing eyepieces, e. g. foc. , to allow the user to compensate for differences in the visual performance of his two eyes. · Use the focusing eyepiece to focus on the line figure of the eyepiece reticle; focus on the edge of the field of view if no eyepiece reticle is used. · Use the focusing drive to focus on the microscope image of a specimen through the eyepiece set as described above. · Then use the second focusing eyepiece to focus the microscope image for the second eye. [. . . ] The position of the focusing drive on the microscope stand must not be changed. B 40-075 e 10/03 2-5 [. . . ]