User manual ZANKER ZKK9414K

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZANKER ZKK9414K. We hope that this ZANKER ZKK9414K user guide will be useful to you.


ZANKER ZKK9414K : Download the complete user guide (161 Ko)

You may also download the following manuals related to this product:

   ZANKER ZKK9414K (176 ko)
   ZANKER ZKK9414K (159 ko)
   ZANKER ZKK9414K (177 ko)

Manual abstract: user guide ZANKER ZKK9414K

Detailed instructions for use are in the User's Guide.

[. . . ] Care must be taken to ensure that the appliance does not stand on the electrical supply cable. The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only. Manufacturers' storage recommendations should be strictly adhered to. During normal operation, the condenser and compressor at the back of the appliance heat up considerably. [. . . ] For building into kitchen units follow the special "Building-in" instructions given. This appliance complies with the following E. E. C. Directives: - 73/23 EEC of 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 EEC of 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. 33 Building-in instructions Door reversibility (Fig. 1 Right opening Remove the pins (P) and (P1) from the left side. Dimensions of housing Height of housing 1446 mm Depth of housing 550 mm Width of housing 560 mm Left opening Remove (P) from both sides and the door. cm2 200 Push appliance into housing until stop strip (A) touches the kitchen unit. Fig. cm 2 200 D027 34 Open the door and push the appliance against the side of the kitchen furniture opposite to that of the appliance hinges. Fasten the appliance with 4 screws provided in the kit included with the appliance. Fig. 4 Position the runners (A) inside the kitchen unit door as shown in Fig. After preparing the holes, screw the runners to the kitchen unit door using 3. 5x16 mm screws. Fig. 7 50mm A 20m PR170 PR166 m Press in the joint covers between the appliance and the kitchen unit. Fig. 5 Open both the appliance door and that of the kitchen unit to approx. Hold the doors of the appliance and the unit together and mark the holes. Fig. 8 8mm D724 Apply covers (B) on joint cover lugs and into hinge holes. Fig. 6 PR167 Remove the little plates and make the holes with a diam. Replace the little plates over the runners and screw in the screws provided (3. 5x16 mm). If the kitchen unit door needs to be re-aligned, adjust the position of the screws in the slots. At the end of the procedure, check that the doors of the appliance and the kitchen unit open properly. Fig. 9 B D726 PR168 35 OPERATION Operation Insert the plug into the wall socket. Open the refrigerator door and turn the thermostat knob, clockwise, beyond the «O» (STOP) position. The appliance will start to operate. Fresh food refrigeration To obtain the best performance: do not store warm food or evaporating liquids in the refrigerator; do cover or wrap the food, particularly if it has a strong flavour. Useful hints: Meat (all types): wrap in polythene bags and place on the glass shelf above the vegetable drawer. Cooked foods, cold dishes, etc. . : these should be covered and may be placed on any shelf. [. . . ] Use the special cleaner provided, which you will find already inserted into the drain hole. Fig. 13 D068 when defrosting is completed, dry the interior thoroughly; keep the scraper for future use; turn the thermostat knob back to the required setting or replace the plug in the power socket. After letting the appliance run for two or three hours on the quick-freeze setting, reload the previously removed food into the compartment. D037 Important: A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life. 38 MAINTENANCE Unplug the appliance before carrying out any maintenance operation. Warning This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Interior light The light bulb inside the refrigerator compartment can be reached as follows: - unscrew the light cover securing screw, - unhook the moving part as shown in the figure. Fig. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANKER ZKK9414K




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANKER ZKK9414K will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.