User manual ZANKER 4654W

[. . . ] For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. Any electrical and plumbing work required to install this appliance should be carried out by a qualified and competent person. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. The sides of the dishwasher must never be drilled to prevent damage to hydraulic components. Under no circumstances should you attempt to repair the machine yourself. [. . . ] All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the WRD detergent dispenser, located in the centre of the upper basket. This detergent will take effect during the prewash phase. 11 Different kinds of detergent Detergent tablets Detergent tablets from different manufactures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals. Use of "3 in 1" combi detergents These products are detergents with a combined cleaning, rinsing and salt function. Before the start of the washing programme put the "3 in 1" detergent in the detergent dispenser. Concentrated detergent Modern detergents for dishwashers are almost exclusively lowalkaline concentrated detergents with natural enzymes in tablet form. Using 50°C washing programmes in conjunction with these concentrated detergents reduces pollution and is good for your dishes, as these washing programmes are specially matched to the dirt-dissolving properties of the enzymes in concentrated detergents. It is for this reason that using 50°C washing programmes in conjunction with concentrated detergents can achieve the same cleaning results that can otherwise only be achieved using 65°C washing programmes. NOTE: If the drying results are not satisfactory we recommend that you: 1. Activate the rinse aid dispenser and set the rinse aid dosage to position 2. If you decide to turn back to the use of the standard detergent system we advise that you: q q q Deactivate the "3 in 1" function. Adjust the water hardness setting to the highest setting perform up to 3 normal washing programmes without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. q q NOTE: When using 4 in 1 detergents that integrate also antiglass corrosion agent into "3 in 1" formula, please follow the same instruction as given for "3 in 1" detergents above. POURING EASY PACK TION DOUBLE AC BRILLIANT RILLIANT SHINE FOR A N EW LIQUID GEL POWDER RINSE C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T 12 Washing programmes Programme Degree of soil and type of load Cycle description (4) Consumption values Energy consumption (in kWh) Water consumption (in litres) (1) POWER BOOST Intensive 70° Heavy soil. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. 4. Setting and starting the programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. To select a programme, press the button of the programme you wish to select, (see "Washing programmes" chart), the indicator light of the button illuminates and in the digital display will appear, flashing, the running time of the programme that has been set (in minutes). In the digital display the running time of the programme will no longer flash, the Wash indicator light remains illuminated. 6. To cancel a delay start To cancel a delay start in progress you have to reset the dishwasher; follow the same instructions given in "To cancel a washing programme in progress". Cancelling a delay start involves also the cancelling of the washing programme set. In the digital display appears 0, only in this case the programme has ended. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Setting and starting the programme with the delay start After having selected the washing programme press the delay start button until the flashing number of the hours for the delay start will appear in the digital display (from 1h to 19h). The opening of the door during the countdown will not modify the delay start. Once the delay start has elapsed the programme will start automatically. Note: With the delay start function set, the Wash indicator light is off. [. . . ] This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations. Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. [. . . ]