User manual YURAKU YUR.PHOTO 102M4 BROCHURE

[. . . ] Overloading wall outlets, circuits, or extension cords can result in overheating, fire, or electric shock. Use only grounded or polarized outlets. SE-UM-0561-0501 2 Power Cord Protection Minimize wear on the power supply cord. The power supply cord should be routed away from foot traffic and contact with other objects. Periodically inspect the power cord and each end of the cord for wear or damage. [. . . ] Ventilation Slots and openings on the Digital Photo Frame are provided for ventilation purposes. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. Keep the Digital Photo Frame a minimum of four (4) inches away from any wall to assure sufficient airflow and ventilation. To assure proper ventilation, do not block the openings by placing the Digital Photo Frame on a bed, sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or enclosed rack, unless proper ventilation is provided. Other Notices and Precautions Caution: Never remove the plastic casing. The warranty does not cover repairs or attempted repairs by anyone not authorized by Westinghouse Digital. If the Frame begins to emit smoke, an abnormal noise, or a strange odor, immediately turn it off and unplug the power cord. If the Digital Photo Frame will not be used for an extended period of time, unplug the power cord. SE-UM-0561-0501 3 This symbol is intended to alert the user of the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person. This symbol is intended to alert the user of the presence of important operation and maintenance instructions in the Digital Photo Frame User's Manual. CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE PLASTIC CASE. REFER SERVICING TO QUALIFIED PERSONNEL. SE-UM-0561-0501 4 Cleaning the Digital Photo Frame · · MAKE SURE THE DIGITAL PHOTO FRAME IS TURNED OFF NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR PLASTIC CASING To Clean the Screen: 1. Now you can safely remove the Digital Photo Frame. Note: Attempting to disconnect the Digital Photo Frame without using the "Safely Remove Device" procedure may cause the files in the internal memory to be unreadable. Built-In Memory How to save files into the internal memory from a Memory Card: 1) Make sure that the Digital Photo Frame is turned off. 3) After turning on the frame, scroll to the file to save into the internal memory. Select Built-in Memory and select Save to save the image into the internal memory. SE-UM-0561-0501 10 How to delete files from the internal memory: 1) Press "Menu" to enter the OSD. Highlight "Card Select" and select 2) Scroll to the file that you want to delete from the internal memory. Highlight "Built-in Memory" and then select "Delete" to erase the file from the internal memory. SE-UM-0561-0501 11 Technical Specifications Model No. : Product: Input Formats: File Format: Features: Internal Memory: USB Port: Power: Weight: Dimensions: YUR. PHOTO 102M4 5. 6" LCD Screen Digital Photo Frame Secure DigitalTM, Multi Media CardTM, Compact FlashTM xD-Picture CardTM Micro DriveTM and Memory StickTM JPEG, AVI Motion JPEG Slide Show Mode AVI Motion JPEG Player 8MB FLASH 1. 1 Input: 100V-240V AC, 50~60HZ Output: 12V DC, 1. 5A 0. 9lbs 6. 02 x 4. 52 x 1. 14 inches SE-UM-0561-0501 12 Frequently Asked Questions Q: What other media formats can the Digital Photo Frame support?A: The Digital Photo Frame only supports JPEG in its raw picture format. These are pictures that come directly from a digital camera as a JPEG file. The Digital Photo Frame may not read images that have been manipulated or altered in Photoshop or downloaded from the Internet. Many of the movie formats downloaded from the Internet are not supported as well. Q: I have a memory card in the Digital Photo Frame, but it's not reading the card. [. . . ] Q: I have a memory card in the Digital Photo Frame, but it's not reading the card. A: First, make sure that you are using a memory that is supported by the Digital Photo Frame. Second, ensure that the memory card is inserted all the way into the slot. Third, press the Menu button and in the OSD make sure that the card has been selected. [. . . ]