User manual YORKVILLE COLISEUM CA1 BROCHURE

[. . . ] [. . . ] Multiple inputs for microphone or source material, and voice activated paging from either a microphone or telephone matrix means the CA1 can be used in virtually any application. XLR / TRS balanced combi-jack inputs and attenuated RCA unbalanced inputs ensure the CA1 system can interface with any source (CD, Cassette, Satellite Tuner, DVD or video system) your installation may require. Capable of driving either a 4-ohm speaker load, or four separate 70-volt speaker systems (one `system' per zone), the CA1 system delivers 180 watts (mono). A pre-amp output is available to feed an auxiliary power amplifier or active subwoofer to enhance the system, or to feed video or audio recording equipment. CA1 Specifications: NUMBER OF CHANNELS INPUTS - 1/4" / XLR COMBI INPUTS - RCA (UNBAL) PHANTOM POWER HEADPHONE MONITOR FEATURES RECORD OUTPUTS MIXER - SIGNAL TO NOISE RATIO (dB) MIXER - FREQUENCY RESPONSE AMP A - POWER OUTPUT @ 4 Ohms AMP A - POWER OUTPUT -OTHER THD - 1kHz (dB) COOLING FINISH CHASSIS CONSTRUCTION RACKMOUNT OTHER FEATURES DIMENSIONS (DWH, inches) DIMENSIONS (DWH, cm) WEIGHT (lbs/kg) 6 3 2 Yes Yes - main Output Yes Greater than 55dB 50 - 15kHz 180 Watts 180 Watts 70-volts Less than 1% Passive Black Steel Yes Zone Paging / Telephone interface 12 x 19 x 6 320 x 480 x 150 24 / 9 yorkville. com [. . . ] [. . . ]