User manual YAMAHA YS-624TE SUPPLEMENTARY SERVICE MANUAL

[. . . ] 5- Filter Section This section contains all the Knobs and buttons associated with the Filter. 6- Mode Section This section contains all the buttons used to select the various playing modes. 7- Filter Modulation Matrix Section This section contains all the Knobs and buttons associated with the Filter Modulation Matrix. 8- LFO Section This section contains all the Knobs and buttons associated with the 2 LFOs. [. . . ] No audible effect to these sound sources will be heard if an attempt is made to adjust this parameter when these sound sources are selected and the display will show "Not Available". Sync Mod Depth ENV 2 Button Knob Button This combination controls the modulation of the Sync Effect on the selected Oscillator by ENV 2. Turning the Mod Depth Knob fully clockwise introduces Sync Effect from ENV 2 to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob fully anticlockwise introduces Sync Effect from ENV 2 to the selected Oscillator in a Negative direction. The range of this parameter is -64 to +63. NOTE: This does not apply to the Noise, 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an attempt is made to adjust this parameter when these sound sources are selected and the display will show "Not Available". Sync Mod Depth ENV 3 Button Knob Button This combination controls the modulation of the Sync Effect on the selected Oscillator by ENV 3. Turning the Mod Depth Knob fully clockwise introduces Sync Effect from ENV 3 to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob fully anticlockwise introduces Sync Effect from ENV 3 to the selected Oscillator in a Negative direction. The range of this parameter is -64 to +63. NOTE: This does not apply to the Noise, 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an attempt is made to adjust this parameter when these sound sources are selected and the display will show "Not Available". The range of this parameter is -64 to +63. NOTE: This does not apply to the 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an attempt is made to adjust this parameter when these sound sources are selected and the display will show "Not Available". 87 OSCILLATOR SECTION Harden Mod Depth ENV 3 Button Knob Button This combination controls the modulation of the Harden Effect on the selected Oscillator by ENV 3. Turning the Mod Depth Knob fully clockwise introduces Harden Effect from ENV 3 to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob fully anticlockwise introduces Harden Effect from ENV 3 to the selected Oscillator in a Negative direction. The range of this parameter is -64 to +63. NOTE: This does not apply to the 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an attempt is made to adjust this parameter when these sound sources are selected and the display will show "Not Available". Harden Mod Depth Wheel Button Knob Button This combination controls the modulation of the Harden Effect on on the selected Oscillator by the Mod Wheel. Turning the Mod Depth Knob fully clockwise introduces Harden Effect from the Mod Wheel to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob fully anticlockwise introduces Harden Effect from the Mod Wheel to the selected Oscillator in a Negative direction. The range of this parameter is -64 to +63. NOTE: This does not apply to the 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an attempt is made to adjust this parameter when these sound sources are selected and the display will show "Not Available". 88 FILTER SECTION Filters menu 12db 18db 24db modulation source special low band high lfo 1 lfo 2 frequency resonance freq env 2 env 3 overdrive q-norm tracking reso/width wheel This section contains all the knobs and buttons associated with the Filter. [. . . ] IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Failure to follow instructions could void your FCC authorisation to use this product in the USA. 3 NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in residential environment will not result in harmful interference with other electronic devices. [. . . ]