User manual YAMAHA YM-410D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA YM-410D. We hope that this YAMAHA YM-410D user guide will be useful to you.


YAMAHA YM-410D : Download the complete user guide (316 Ko)

You may also download the following manuals related to this product:

   YAMAHA YM-410D (578 ko)

Manual abstract: user guide YAMAHA YM-410D

Detailed instructions for use are in the User's Guide.

[. . . ] Holding the rail section can result in the instrument dropping or falling off. Never hold the instrument anywhere other than the frame ends. * Approximate weights for concert marimbas are given in the following chart. YM-41 YM-46 41 kg (90 lbs 6 oz) 44 kg (97 lbs) YM-410 YM-410F YM-410D 49 kg (108 lbs) 55 kg (121 lbs 4 oz) 55 kg (121 lbs 4 oz) YM-460 YM-460F 55 kg (121 lbs 4 oz) 61 kg (134 lbs 8 oz) Hold the instrument by the frame end and push forward slowly. Moving the instrument up or down stairs should never be done with the instrument assembled. Doing so is a danger as parts can fall off, or you can loose balance causing the instrument to fall over. [. . . ] Since the YM-410/410F is adjustable in 7-steps, from 76cm to 88cm, it promotes proper playing posture from children to adults. 5. Fine Tuning Tone bars are tuned by the highly refined ears and skills of our technicians and precision strobe tuners in an environmentally controlled room in which both temperature and humidity are kept constant. Precise tuning of the harmonic overtones, which determine timbre, results in stable pitch and tone without any unevenness. 6. 3-Step Height Adjustment for Resonator Pipes Resonator height can be adjusted in 3-steps to avoid loss of ideal resonance due to temperature changes. Easy Assembly/Disassembly The instrument is designed to offer easy assembly and disassembly to provide convenient storing and transport. The YM-460, 460F, 410D, and 46 utilize folding designs with two-section frames and pipes to provide the utmost in compact convenience. 24 NOMENCLATURE YM-460/460F/410/410F/46/41 * The illustration shows model YM-460. Rail Accidental tone bars Natural tone bars Suspension cord Frame end Leg (Small end) Slant shaft Slide leg Resonators (Accidental tone side) Resonators (Natural tone side) Caster (with brake) Reinforcement stay (Small end) Reinforcement stay (Large end) Leg (Large end) Caster YM-410D Accidental tone bars Rail Natural tone bars Suspension cord Frame end Leg (Small end) Leg (Large end) Reinforcement stay (Small end) Resonators (Accidental tone side) Caster (with brake) Caster 25 YM-460/460F/410/410F/46/41 CONFIRMATION OF PACKING CONTENTS The shipping carton of your marimba should contain the parts shown below. Before assembling the instrument, confirm that all parts are included as listed. * In the event that a part is missing, please contact the shop where the instrument was purchased. q Natural tone bars y Rail (1) YM-460/460F, 46: Two-section folding type YM-410/410F, 41: One-piece type u Rail (2) w Accidental tone bars YM-460/460F, 46: Two-section folding type YM-410/410F, 41: One-piece type Rail clamp Threaded hole i Rail (3) e Resonators (Natural tone side) YM-460/460F, 410/410F, 46: 2 sections plus wing bolts x2 YM-41: One-piece type YM-460/460F, 46: Two-section folding type YM-410/410F, 41: One-piece type Clamp on both sides o Rail (4) YM-460/460F, 46: Two-section folding type YM-410/410F, 41: One-piece type YAMAHA logo r Resonators (Accidental tone side) YM-460/460F, 410/410F, 46: 2 sections plus wing bolts x2 YM-41: One-piece type !0 Leg (Large end) YM-460/460F, 410/410F: With height adjustment YM-46/41: Without height adjustment t Reinforcement stay YM-460/460F, 46: 2 sections YM-410/410F, 41: One-piece type !1 Leg (Small end) For low sound side (YM-460/460F) YM-460/460F, 410/410F: With height adjustment YM-46/41: Without height adjustment For high sound side (YM-460/460F) 26 YM-460/460F/410/410F/46/41 ASSEMBLY For safety, the instrument should be assembled by at least two persons in a location with sufficient space. We recommend to you to assemble the instrument on a soft rug or carpet. z Connect the large and the small end legs using the reinforcement stays. * YM-460/460F/410/410F: Before proceeding to the next step, make sure that the slide leg fixing bolts of the large and small end legs are securely fastened. Leg (Large end) The tip of each slide leg fixing bolt must be tightly seated in one of the slide leg notches. Slide leg fixing bolt Slide leg fixing bolt Slide leg fixing bolt Leg (Small end) Slide leg Slide leg fixing bolt 1-1. Place the large and small end legs and reinforcement stays so that they will be positioned as illustrated below after assembly. Frame end (Large end) Leg (Small end) High sound side Slant shaft Leg (Large end) Player side Reinforcement stay (Small end) Reinforcement stay (Large end) Audience side Low sound side 27 YM-460/460F/410/410F/46/41 ASSEMBLY 1-2. Align the end of the fixing bolt and the holes in the reinforcement stays and tighten the fixing bolt securely. * Insert the support using the reference hole close to the hole for the screw as a guide. Reference hole Reinforcement stay (Small end) Reinforcement stay (Large end) Screw hole 1-3. Engage the short rail clamp located at the center of the rail (3) with the rail (2). 29 YM-460/460F/410/410F/46/41 ASSEMBLY c Attach the resonators. 3-1. Make sure that the natural tone and accidental tone sides are properly assembled. Insert the resonators into the resonator holders on the frame ends in the same way as the rails. Place the bass side of the resonators into the center grooves on the resonator holder. * Make sure not to confuse the natural tone resonators and accidental tone resonators. * Take care not to bump the resonators against the legs, etc. Resonators (Natural tone side) Resonators (Accidental tone side) * The resonators are factory adjusted so that the optimum resonance level is obtained at 23°C. If desirable resonance is not available due to the temperature lower or higher than 23°C, adjust setting of the resonators. Move the resonators to fit into longer grooves when the temperature is higher and into shorter grooves when the temperature is lower. Temperature Higher Around 23°C Lower Grooves to use Short groove ("A" in the figure below) Center groove ("B") Long groove ("C") Resonator holder A : For a higher temperature B : For a temperature around 23°C C : For a lower temperature 30 YM-460/460F/410/410F/46/41 ASSEMBLY v Insert the rails (1) and (4) into the frame ends of the legs. 4-1. Insert the outer rails (1) and (4) in the same way as the inner rails (2) and (3). [. . . ] If desirable resonance is not available due to the temperature lower or higher than 23°C, adjust setting of the resonators. Move the resonators to fit into longer grooves when the temperature is higher and into shorter grooves when the temperature is lower. Temperature Higher Around 23°C Lower Grooves to use Short groove ("A" in the figure below) Center groove ("B") Long groove ("C") Resonator holder A : For a higher temperature B : For a temperature around 23°C C : For a lower temperature 37 YM-410D ASSEMBLY v Insert the rail (1) into the frame ends of the legs. 4-1. Insert the outer rail (1) in the same way as the inner rails (2), (3) and (4). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA YM-410D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA YM-410D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.