User manual YAMAHA TSX-W80

[. . . ] U DESKTOP AUDIO SYSTEM SYSTEME AUDIO DESKTOP TSX-W80 OWNER'S MANUAL MODE D'EMPLOI IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 2 3 4 5 6 7 8 Keep these instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Do not use this unit near medical devices or inside medical facilities. Do not use this unit within 22 cm (9 in) of persons with a heart pacemaker implant or defibrillator implant. 2 3 4 5 6 7 8 9 10 11 12 13 14 iii En PREPARATION English CONTENTS NAMES OF PARTS AND THEIR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 BASIC FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LISTENING TO iPodTM AND EXTERNAL SOURCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LISTENING TO RADIO STATIONS . . . . . . . . . . . . . . . . . 11 Français Features ­ Hi-quality iPod/iPhone, radio and external device playability. ­ Firm bass sound and spacious stereo sound from 2. 1 ch powered speaker (tweeter × 2, woofer × 1), SRBassTM (Yamaha Swing Radiator Bass technology) and DSP in a compact unit. 8) C FM, AM: Switching FM/AM D Charging cradle: For charging an iPod E Illumination sensor: Measuring surrounding illuminance. Do not cover this sensor. 2 En NAMES OF PARTS AND THEIR FUNCTIONS English Rear panel 15V : Connect supplied AC adaptor and power cable. 4) TONE CONTROL: Control Bass and Treble. Connecting antennas Indoor FM antenna (supplied) AM loop antenna (supplied): Connect the black cord to GND, and the white to AM ANT. Notes · The antenna should be stretched out. · If radio reception is poor, change the height, direction, or placement of the antenna. · If you use outdoor antennas instead of the supplied antennas, reception will be better. Ground (GND terminal): For minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. Remote control Source buttons: iPod, AUX, RADIO. 4) Infrared signal transmitter iPod control buttons VOLUME: Volume control TUNING: Tuning radio ( P. 8) Battery insulation sheet: Remove before using. 3 En OPERATION BASIC FUNCTIONS Adjusting the clock 1 Set CLOCK to SET. 3 Set CLOCK to LOCK. Note Rear panel Front panel display flashes. The time settings are lost approximately one week after unplugging the unit. Alarm setting This unit can play back iPod/radio and/or beep sound at the set time. Setting the alarm time and sound 1 Press SET. 3 Set ALARM TYPE. Alarm indicator ( ) and front panel display flashes. · SOURCE+BEEP: selected source (played back from 3 minutes before the alarm time) and beep sound (played back at the alarm time) · SOURCE: selected source · BEEP: beep sound only When you select SOURCE+BEEP or SOURCE, select: · iPod: this unit resumes the song you listened to last time. · RADIO: this unit plays back the radio station you listened to last time. Rear panel (As required) 4 Set the alarm volume. 5 Press SET. Alarm is set and the alarm indicator ( ) lights up. Note When iPod is selected as a source, set the iPod to the charging cradle ( P. If iPod is not set at the alarm time, beep sound is played back. Switching the alarm on/off Switch on/off the alarm function. When the alarm is on, the alarm indicator ( ) lights up and alarm time is displayed for a while. 4 En BASIC FUNCTIONS English Operations during playing back alarm sound At the set time, alarm sound plays back. During playback, operations below are available. Using the snooze function Press SNOOZE/SLEEP. The alarm sound stops and resumes after 5 minutes. Stopping the alarm Press ALARM or y · Unless you stop the alarm, the alarm stops after 60 minutes automatically. · When you stop the alarm, the alarm time setting, etc. , is saved for convenient use next time. . Sleep setting You can set the time to turn off the system automatically when sleep is set to on. Select the sleep time. You can set 30, 60, 90 or 120 minutes. When the sleep function is on, the sleep indicator ( ) lights up. Press repeatedly. Sleep indicator ( ) and front panel display flash. y To cancel the sleep, press SNOOZE/SLEEP. Timer setting You can set the countdown timer. 1 Press TIMER. [. . . ] (Status indicator of transmitter flashes green and iPod indicator of SOURCE on unit flashes. ) The signal from the transmitter is Change the way of holding, the orientation, blocked by your body or metallic objects, or the position of the transmitter to avoid etc. There is a device (microwave oven, wireless LAN, cordless telephone, etc. ) outputting signals in the 2. 4 GHz frequency band nearby. If the device is IEEE802. 11ncompliant, change the channel setting of the device so as not to affect the unit. If noise occurs at the same frequency the This is not malfunction. If cut occurs transmitter is using, the unit will search frequently, relocate the unit. [. . . ]