User manual YAMAHA TSX-B235

[. . . ] A room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: – Other components, as they may cause damage and/or discoloration on the surface of this unit. Candles), as they may cause fire, damage to this unit, and/or personal injury. [. . . ] When scan is completed, the number of receivable DAB stations appear on the front panel display. If the initial scan is performed, stored DAB station information and preset DAB stations are cleared. Performing the initial scan again (remote control only) 1 2 1 Press and hold down MEMORY on the remote control. 12 En LISTENING TO DAB STATIONS (TSX-B235D only) Selecting DAB stations English 1 1 Press the RADIO source button to switch the audio source to DAB. / to select the DAB While receiving DAB, DAB station information is shown on the front panel display. If the unit does not receive a DAB signal, “Off Air” is displayed instead of the DAB station name. 1 2 1 Secondary indicator: Some stations have sub (secondary) stations. If a secondary station is playing, the secondary indicator is displayed. 10:30 DAB01 STATION1 3 4 2 Signal strength indicator: Shows current signal strength. 3 Preset number 4 DAB station name Display information (remote control only) If you press DISPLAY on the remote control, the information shown on the front panel display will be switched in the following order. 200 Channel label 11C 11D 12A 12B 12C 12D 13A 13B 13C 13D 13E 13F 13 En LISTENING TO DAB STATIONS (TSX-B235D only) Presetting DAB stations (remote control only) Use the preset function to store your favorite 30 stations. Auto preset This method tunes automatically, and automatically presets only the stations that have good reception. When presetting has finished, the display will indicate “Completed!When you perform auto preset, all stored stations are cleared and the new stations are stored. AUTO PRESET Press MEMORY Manual preset 1 2 4 3 If you want to stop auto preset before it is completed, press . To tune a station that The display will indicate “PRESET MEMORY, ” and the preset number will blink. 50MHz • The lowest preset number that has not been stored will be selected first. € If you select a preset number in which a station has already been stored, it will be overwritten by the new station. When presetting has finished, the display will indicate “Completed!The display will indicate “PRESET MEMORY”, and the preset number will blink. The preset will be deleted, and the display will indicate “Deleted!16 En LISTENING TO FM STATIONS Selecting preset FM stations English 1 1 Press the RADIO source button to switch the audio source to FM. [. . . ] The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. Model IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Make sure that neither core is connected to the earth terminal of the three pin plug. [. . . ]