User manual YAMAHA TNR-I QUICK GUIDE

[. . . ] 23 · Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. · The software and this owner's manual are exclusive copyrights of Yamaha Corporation. · Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. · Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. [. . . ] http://www. global. yamaha. com/tenori-on/downloads/ Play Menu Parameters that apply to all layers and blocks. Master Tempo* Master Scale* Sets the master tempo. Sets the master scale. The "Major Pentatonic" and "User" scales are provided in the TNR-i, in addition to the scales of the hardware TENORI-ON. Master Transpose* Master Loop Speed* Master Loop Point* Reset Loop Timing Mute Swing Rate Sets the transposition. Resets the playback position to the beginning of the loop. You can reset loop timing by holding the [L4] and tap the [R1] . Mutes sound output. You can control Mute on/off by holding the [R4] and tap the [L1] . Sets the "swing" feel. Produces a "swing" feel by shifting the timing of the back beats. The smaller the rate, the shorter the repeat interval with the previous LED button. When using a swing feel, changing the loop's point and speed, and inputting the performance data into layers other than Score mode, etc. , may shift the timing between layers. Range . . . . . . . . . . . . . . . . . . -23 ­ 0 ­ +23 Default . . . . . . . . . . . . . . . . 0 LED buttons. . . . . . . . . No display Color Function Color Sets the color of the active note LED. Range . . . . . . . . . . . . . . . . . . White, Blue, Purple, Pink, Red, Orange, Green, Blue Green Sets the color of the function LED. You can select the LED color which is shown when the function button [L1] ­ [R5] is touched. Range . . . . . . . . . . . . . . . . . . White, Blue, Purple, Pink, Red, Orange, Green, Blue Green Indicator Color Sets the color of the loop indicator. Range . . . . . . . . . . . . . . . . . . White, Blue, Purple, Pink, Red, Orange, Green, Blue Green TNR-i Quick Guide 17 Menu List Layer Menu Parameters that apply to the currently selected layer. Instrument* Selects the Voice. Tap the "Instrument" in the menu to call up the Voice list. Scroll through the list by dragging, then select the desired Voice by tapping. Unlike on the hardware TENORI-ON, no data is assigned to the User Voice area with the "--------" indication. Voice map Volume* Loop Speed* Sound Length* Panpot* Animation* Animation Direction Sets the layer volume. Specifies the light animation. Sets the motion direction of the light animation to "Expand" or "Shrink. " Edit Menu Data edit functions such as copy, clear, and reset. After executing the Edit function, the button indication will change to [Undo]. [Undo] itself will be canceled when you execute any of the following operations. · Keeping [Undo] active without conducting any operations for longer than fifteen seconds. Copy this Block* Copies the current block to another one. Tap this menu item to call up the corresponding display. Set the destination block number then tap [Copy] to execute this function. Clear this Block* Copy this Layer* Clears the active notes for the current blocks. Tap [Clear] in the Menu to execute the function. Copies the layer. Tap this menu item to call up the corresponding display. Set the destination Block number and Layer number, then tap [Copy] to execute this function. Clear this Layer* Clear All Blocks* Reset All Blocks* Clears the active notes for the current layer. Tap [Clear] in the Menu to execute the function. Clears the active notes from all blocks (all layers). Tap [Clear] in the Menu to execute the function. Resets all blocks (all layers). Tap [Reset] in the Menu to execute the function. TNR-i Quick Guide 18 Menu List Preference Menu Initial settings that apply to the entire instrument. Quantize* Push Sensitivity* Master Tuning* Local Control* Synchronize* Loop Indicator* User Scale Setting Note Synchronizes Solo mode note timing with the Score mode. Allows you to create your own scale. Assigns a note name (such as C#3, A5, etc. ) to each of the 16 scale note numbers. Use the created scale by selecting the User by "Main Menu" > "Play Menu" > "Master Scale. " Scale note number Note name The selected scale note number is represented as the vertical axis of LED buttons on the Score/ Random/Draw mode and the horizontal axis of LED buttons on the Bounce/Push/Solo mode. File Menu Data file save, load, rename and delete functions. The following five types are available. Song* All Blocks* Current Block* Current Layer* All Settings* Song File operations All Blocks File operations Current Block File operations Current Layer File operations All Settings File operations TNR-i Quick Guide 19 Menu List To the above five file types, you can apply the file operations listed below. Tap the desired file type in the File Menu to call up the available file list, then execute the desired operation. Save Tap the [+] button. Tapping the [+] with the selected Song file will call up the Recording Menu. Rename, Delete and Mail Menu Tap the [>] indicator. Load Tap the file name. Delete Flick the file name, then [Delete] will appear. Load Rename Tapping the desired file will call up the dialog. During loading, no other operations, including Load Cancel, can be executed. Tap [>] at the right of the file name to call up the File Rename display. From this display, tap the file name to call up the on-screen keyboard, then enter the desired name. If you've entered an already existing name and an error dialog appears, enter a different name. Send Mail In the File Rename display called up via [>], tap [Send Mail] to start up the E-mail software. Enter the destination address, write or revise your message then tap [Send] to send the selected TNR-i file. [. . . ] Ask your friend to set "Notifications" (called up via [Setting] > [Notifications]) of iOS in his/her iPhone/iPad to on. Ask your friend to set "Alerts" (called up via [Setting] > [Notifications] > [Game Center]) of iOS in his/her iPhone/iPad to on. 1. 3. Tap [Invite Friend] in the Multiplayer Game to call up your friends list. Tap [Next], enter a message to your friends as desired, then tap [Send] to send the invitation message to your friends' iPhone/iPad. Your friends will receive your invitation message with a fanfare sound. [. . . ]