User manual YAMAHA STAGEPAS 500

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA STAGEPAS 500. We hope that this YAMAHA STAGEPAS 500 user guide will be useful to you.


YAMAHA STAGEPAS 500 : Download the complete user guide (674 Ko)

You may also download the following manuals related to this product:

   YAMAHA STAGEPAS 500 (1 ko)
   YAMAHA STAGEPAS 500 (638 ko)
   YAMAHA STAGEPAS 500 (640 ko)
   YAMAHA STAGEPAS 500 (742 ko)
   YAMAHA STAGEPAS 500 (985 ko)
   YAMAHA STAGEPAS 500 (641 ko)
   YAMAHA STAGEPAS 500 (535 ko)
   YAMAHA STAGEPAS 500 (562 ko)
   YAMAHA STAGEPAS 500 (579 ko)
   YAMAHA STAGEPAS 500 (976 ko)
   YAMAHA STAGEPAS 500 (717 ko)
   YAMAHA STAGEPAS 500 (512 ko)
   YAMAHA STAGEPAS 500 戵־ (896 ko)
   YAMAHA STAGEPAS 500 (504 ko)

Manual abstract: user guide YAMAHA STAGEPAS 500

Detailed instructions for use are in the User's Guide.

[. . . ] EN 500 Owner's Manual Troubleshooting Power does not turn on Is the included power cord correctly connected to a power outlet? CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Dimentions Speaker Mixer LOCK OPEN LOCK OPEN +15 +15 Unit: mm L (MONO) +15 15 REVERB HIGH +15 15 LOW LEVEL 10 0 Power shuts down suddenly Thank you for your purchase of the Yamaha PORTABLE PA SYSTEM STAGEPAS 500. The STAGEPAS 500 is a versatile, compact PA system consisting of two speakers and a mixer. In order to get the most out of your new STAGEPAS 500 and its sophisticated functions, we suggest you read through this manual thoroughly. [. . . ] Attempting to lift the device by yourself may damage your back, result in other injury, or cause damage to the device itself. When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Make sure that there is adequate space between the mixer and surrounding walls or other devices: at least 30 cm at the sides, 30 cm behind and 30 cm above. If the mixer is to be used installed into the speaker cabinet, make sure to allow adequate space between the speaker and the surrounding walls or other devices: at least 30 cm at the sides, 30 cm behind and 30 cm above. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire. Doing so can result in damage or injury. For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 POLAND Yamaha Music Central Europe GmbH Sp. z. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-868-07-57 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 25/F. , United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 Using a single speaker You can use a single speaker. If you use a single speaker, the mixer outputs just one channel of the stereo Use only the mixer's handles when removing the mixer from the speaker and when carrying the mixer Caution signal, left or right. U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 INDONESIA PT. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 separate from the speaker. Outputting the signal for monitoring NOTE: The mixer can also be used when installed in the speaker. CENTRAL & SOUTH AMERICA MEXICO Yamaha de Mxico S. A. 09300, Mxico, D. F. , Mxico Tel: 55-5804-0600 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Valle Cedex 2, France Tel: 01-64-61-4000 Connect a powered speaker to the MONITOR OUT jack. The MONITOR OUT jack outputs the signal prior When you install the mixer into the speaker, make sure to match the indentations on the speaker cabinet to the corresponding parts on the mixer, and then turn each screw from OPEN to LOCK until it clicks. Adjust the level of output signal from the MONITOR OUT jack with the MONITOR OUT control. If only the L (left) MONITOR OUT jack is used, the mixer mixes the left and right signals and sends KOREA Yamaha Music Korea Ltd. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 080-004-0022 ITALY Yamaha Musica Italia S. P. A. Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi, CEP 04534013 Sao Paulo, SP. BRAZIL Tel: 011-3704-1377 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-78030900 SPAIN/PORTUGAL Yamaha-Hazen Msica, S. A. [. . . ] For high-level signals (such as keyboard instruments and audio equipment), set the switch to the LINE ( ) position. MIC LINE MIC LINE MIC LINE MIC LINE continuously, the internal power amplifier section is being excessively overloaded and may malfunction. Reduce the output level with the MASTER LEVEL control this switch to MIC or LINE. We also recommend that you turn the MASTER LEVEL control to the minimum setting before operating the switch, to avoid excessively loud noises that could cause Powered SP CD Player 4 REC OUT L/R jacks These output the mixed signal channels from 1 to 9/10, and the level is unaffected by the MASTER LEVEL control. You can use these jacks, for example, to connect to an external recorder. hearing loss or device damage. NOTE: When using a condenser microphone, set the PHANTOM switch to ON. R L L R so that the indicator flashes only briefly on the highest transient peaks. 9 PHANTOM switch If you set the switch on, the mixer supplies phantom power on to the XLR mic input jacks on the channels 1 to 4. Be sure to leave this switch OFF if the device or instrument that you are using does not require Caution 4 Turning the power on First, turn on the power to any connected devices, then turn the STAGEPAS 500 power on. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA STAGEPAS 500




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA STAGEPAS 500 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.