User manual YAMAHA RX-V663

[. . . ] G RX-V663 AV Receiver Ampli-tuner audio-vidéo OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. 2 Install this sound system in a well ventilated, cool, dry, clean place ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. [. . . ] -- Use this feature to enjoy 6. 1/7. 1-channel playback for multi-channel sources using the Dolby Pro Logic IIx, Dolby Digital EX, or DTS-ES decoders by using the connected surround back speakers. Functions Page 81 81 A)EQUALIZER 81 B)LFE LEVEL SPEAKER HEADPHONE 82 82 82 82 C)DYNAMIC RANGE SPEAKER HEADPHONE HDMI AUTO AUTO MANUAL D)LIPSYNC 83 83 83 E)EXTD SUR. 83 72 En Customizing this unit (MANUAL SETUP) Input menu 4 INPUT MENU Note Some parameters described below may not be available for all input sources and some parameters are only available for specific input sources. TRIM DECODER MODE STANDBY CHARGE START PAIRING BGV INPUT CH FRONT Functions Assigns the input/output jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Changes the name of the input source that appears in the OSD and in the front panel display. Selects whether this unit charges the battery of the stationed iPod or not when this unit is in the standby mode (see page 29). Pair the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a Bluetooth component (see page 62). Selects the video source played back in the background of the sources input at the MULTI CH INPUT jacks. Selects the analog jacks at which the front channel signals from an external decoder are input when you set "INPUT CH" to "8CH". Page 84 85 85 85 85 86 86 86 86 ADVANCED OPERATION Option menu Menu 5 OPTION MENU Parameter DIMMER OSD SHIFT OSD-SOURCE OSD-AMP FL SCROLL Functions Adjusts the brightness of the front panel display. Sets the amount of time to display the iPod menu in the video monitor after you perform a certain operation. Sets the amount of time to display the status information screen after you perform a certain operation. Selects the mode to display the information of the iPod in the front panel display. Selects whether to convert the video signals input at the VIDEO, S VIDEO, and COMPONENT VIDEO jacks. Prevents accidental changes to sound field program parameter values and other system settings. Page 87 87 87 A)DISPLAY SET 87 87 B)VIDEO SET C)MEMORY GUARD VIDEO CONV. -- 88 88 English 73 En Customizing this unit (MANUAL SETUP) Menu Parameter AUDIO SELECT Functions Designates the default audio input jack select setting for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Designates the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Designates the extended decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Selects whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack. Sets the volume level of Zone 2 when you turn on the power of this unit. Page 89 D)INIT. CONFIG DECODER MODE EXTD SUR. 89 89 E)HDMI SET F)ZONE2 SET S. AUDIO MAX VOL. VOL. 89 90 90 Signal information SIGNAL INFO Use this feature to check audio and video signal information (see page 46). 74 En Customizing this unit (MANUAL SETUP) Using SET MENU Use the remote control to access and adjust each parameter. y · You can change the "SET MENU" parameters while this unit is reproducing sound. · If you press RPARAMETER during the "SET MENU" operation, the "SET MENU" operation is canceled. · Press 0RETURN to return to the previous menu level. 4 Press 9k / n repeatedly and then press 9ENTER to select and enter the desired menu. The following displays are examples where "SOUND MENU" is selected. 3 SOUND MENU . [. . . ] (3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha's instructions on the proper use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country where it is used. (4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha's control. (5) Defects of the system into which this product is incorporated and/or incompatibility with third party products. (6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland. [. . . ]