User manual YAMAHA RX-V465

[. . . ] A RX-V465 AV Receiver OWNER'S MANUAL Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. 2 Install this sound system in a well ventilated, cool, dry, clean place ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. [. . . ] You are recommended to read and fully understand all the instructions before starting. 1 2 Change the input source to "DOCK" using NINPUT l / h (or gDOCK). Turn on the Bluetooth component you want to pair with and set it to pairing mode. For details on operation of the Bluetooth component, refer to its operating instructions. "Searching" appears on the front panel display and the pairing operation starts. · You can also start pairing operation by pressing and holding DMEMORY on the front panel. 3 4 4 Start playback of the Bluetooth component. 5 Make sure the Bluetooth component recognizes the Bluetooth wireless audio receiver. If the Bluetooth have recognized the Bluetooth wireless audio receiver, "YBA-10 YAMAHA, " for instance, is displayed in the Bluetooth device list. 32 En ADVANCED OPERATION Setting the option menu for each input source (OPTION menu) INTRODUCTION This unit has an OPTION menu of frequently used menu items for input sources compatible with this unit. The procedure for setting the OPTION menu items is described below. 1 2 Select an input source using NINPUT l / h (or gInput selection keys). For details, see the following section. OPTION menu items The following menu items are provided for each input source. Input Source HDMI1-4 Volume Trim Volume Trim Volume Trim Volume Trim Volume Trim Volume Trim Volume Trim Volume Trim FM Mode Auto Preset Repeat Clear Preset Menu item Decoder Mode Decoder Mode EXTD Surround EXTD Surround Signal Info PREPARATION Volume Trim 3 Select the desired menu item using nCursor k / n, and press nENTER. Change the setting of the selected menu item (or enable a function) using nCursor k / n / l / h and nENTER. You can also use nRETURN to return to the previous screen or close the OPTION menu. y · When nCursor or other keys do not work after completing the menu, select the input source again using gInput selection keys. AV1-4 Signal Info AV5-6 BASIC OPERATION AUDIO1-2 4 V-AUX TUNER ADVANCED OPERATION iPod (DOCK) Bluetooth (DOCK) Shuffle 5 Connect/ Disconnect Pairing Details of the menu items are as follows: y · The default settings are marked with "*. " ADDITIONAL INFORMATION Volume Trim Input source: All Adjustable range: -6. 0 dB to 0. 0 dB* to +6. 0 dB (in 0. 5 dB steps) Reduces any change in volume when switching input sources by correcting volume differences between input sources. You can set this parameter for each input source. APPENDIX English 33 En Setting the option menu for each input source (OPTION menu) Decoder Mode Signal Info Input source: HDMI1-4, AV1-4 Input source: HDMI1-4, AV1-4 Choices: Auto*/DTS Selects DTS digital audio signals for reproduction. Other input signals are not reproduced. Displays information on audio and video signals on the front panel display. You can change items to be displayed using nCursor k / n. Signal Info parameters Audio information Information Description Format of digital audio signals. For example, if input signal channels are 3 front channels, 2 surrounds and LFE, "3/2/ 0. 1" is displayed. If a channel that cannot be expressed as the above, a total number of channels such as "5. 1ch" may be displayed. The bit rate of input signal per second. EXTD Surround Input source: HDMI1-4, AV1-4 Choices: Auto*/PLIIxMovie/PLIIxMusic/EX/ES/ Off Selects whether to reproduce multi-channel input signals in 6. 1- or 7. 1-channel when surround back speakers are used. Auto Automatically selects the most suitable decoder according to whether a flag for reproducing surround back channel is present, and reproduces the signals in 6. 1- or 7. 1channel. Always reproduces signals in 6. 1- or 7. 1channel using the PLIIxMovie decoder whether or not surround back channel signals are contained. Always reproduces signals in 6. 1- or 7. 1channel using the PLIIxMusic decoder whether or not surround back channel signals are contained. Automatically selects the most suitable decoder for input signals whether or not the flag for reproducing surround back channel is present, and always reproduces signals in 6. 1channel. Always reproduces signals in 5. 1-channel whether or not the flag for reproducing surround back channel is present. PLIIx Movie PLIIx Music Notes · "No Signal" is displayed when no signals are input and "---" is displayed when signals that this unit cannot recognize are input. [. . . ] 8. 4 kg (18. 5 lbs) APPENDIX * Specifications are subject to change without notice. English 57 En Index Numerics 1 Dynamic Range, sound setup . . . . . . . . . . . . . . . . . . . . . 26 Connecting set-top box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Connecting speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Connecting speaker cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Connecting the AC power cable . . . . . . . . . . . . . . . . . . . . 17 Connecting the surround back speakers . . . . . . . . . 11 Connecting TV monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Controlling other component, remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Crossover, A)Config, speaker setup . . . . . . . . . . . . . . . 40 CT Level, sound field parameter . . . . . . . . . . . . . . . . . . . . 36 Cursor indicator, front panel display . . . . . . . . . . . . . . . . 6 Cursors k / n / l / h, remote control . . . . . . . . . . . . 7 Initialize setting, advanced setup . . . . . . . . . . . . . . . . . . . 22 A D A)Config, speaker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 D)Equalizer, speaker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Decoder Mode, OPTION menu . . . . . . . . . . . . . . . . . . . . . 34 Decoder parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Dimension, decoder parameter . . . . . . . . . . . . . . . . . . . . . . . 37 Dimmer, 2 Display, function setup . . . . . . . . . . . . . . . . 42 DIRECT, front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Direct, sound field parameter . . . . . . . . . . . . . . . . . . . . . . . . . 36 Disconnect, OPTION menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 DISPLAY, remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Displaying input signal information . . . . . . . . . . . . . . 23 DOCK terminal, rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Drama, sound field program . . . . . . . . . . . . . . . . . . . . . . . . . . 25 DSP Level, sound field parameter . . . . . . . . . . . . . . . . . 36 DSP Parameter, Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Manual, 2 Lipsync, sound setup . . . . . . . . . . . . . . . . . . . . [. . . ]