User manual YAMAHA RX-V392RDS

[. . . ] RXV492 RXV392 Natural Sound AV Receiver Récepteur audiovisuel "Son Naturel" Receptor AV de Sonido Natural Thank you for selecting this YAMAHA AV receiver. Nous vous remercions d'avoir porté votre choix sur ce récepteur audiovisuel YAMAHA. Muchas gracias por haber adquirido este receptor AV YAMAHA. OWNER'S MANUAL MODE D'EMPLOI MANUAL DE INSTRUCCIONES SAFETY INSTRUCTIONS 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Wall or Ceiling Mounting ­ The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation ­ The unit should be situated so that its location or position does not interfere with its proper ventilation. [. . . ] When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position and switch off the digital sound field processor (so that no DSP program name is illuminated on the display) by pressing the EFFECT button. PHONES 15 F MEMORY (MAN'L/AUTO FM) button When this button is pressed, the MEMORY indicator flashes for about 5 seconds. During this period, select a desired preset station number by pressing the corresponding preset station number selector button to enter the displayed station into the memory. When this button is pressed and held for about 3 seconds, the automatic preset tuning begins. (Refer to page 28 for details. ) J DELAY/CENTER/REAR and TIME/LEVEL +/­ buttons RX-V492 only Adjust the delay time (DELAY), the rear channel output level (REAR) and the center channel output level (CENTER). Select the item which you want to adjust by pressing the DELAY/CENTER/REAR button and adjust its time or level by pressing the TIME/LEVEL +/­ button. G EDIT button This button is used to exchange the places of two preset stations with each other. K CENTER MODE button Selects a center channel output mode (NORMAL, WIDE or PHANTOM). (For details, refer to page 21. ) H TUNING DOWN/UP button Used for tuning. Press the "UP" side to tune in to higher frequencies, and press the "DOWN" side to tune in to lower frequencies. L PROGRAM selector button RX-V392 only When the built-in digital sound field processor (including the Dolby Pro Logic Surround decoder) is on, this button changes the currently selected DSP program whenever the right or left side of this button is pressed. I TUNING MODE (AUTO/MAN'L MONO) button Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that "AUTO" lights up on the display. To select the manual tuning mode, press this button so that "AUTO" goes off. M CENTER LEVEL control RX-V392 only Adjusts the sound output level of the center speaker. N REAR LEVEL control RX-V392 only Adjusts the sound output level of the rear speakers. 16 English DISPLAY PANEL 1 234 56 PRESET MEMORY AUTO TAPE MON NORM WIDE PHANTOM l00 0 20 MHz EFFECT OFF PRO LOGIC CONCERT MONO DISCO ROCK CONCERT ENHANCED VIDEO MOVIE STADIUM CONCERT HALL ms dB STEREO SLEEP kHz 8 7 9 0 1 Multi-information display Displays various information, for example station frequency, preset station number and name of selected input source. 2 STEREO indicator Lights up when an FM stereo broadcast with sufficient signal strength is received. 3 Signal-level meter Indicates the signal level of the received station. 4 SLEEP indicator Lights up while the built-in SLEEP timer is functioning. 5 Center channel mode indicators The name of a selected center channel mode lights up only when a program which uses the Dolby Pro Logic Surround decoder is selected. 6 EFFECT OFF indicator Lights up if neither the digital sound field processor nor the Dolby Pro Logic Surround decoder is on. 7 AUTO indicator Lights up when this unit is in the automatic tuning mode. 8 MEMORY indicator When the MEMORY button is pressed, this indicator flashes for about 5 seconds. During this period, the displayed station can be programmed to the memory by using the A/B/C/D/E button and the preset station number selector buttons. 9 TAPE MON indicator Lights up when the tape deck (or MD recorder etc. ) is selected as the input source by pressing the TAPE (MD) MONITOR button. 0 DSP program indicators The name of a selected DSP program lights up when the builtin digital sound field processor and/or the Dolby Pro Logic Surround decoder is on. 17 REMOTE CONTROL TRANSMITTER The remote control transmitter provided with this unit is designed to control all the most commonly used functions of this unit. If the CD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this remote control transmitter will also control various functions of each component. RX-V492 9 1 ­ TIME/ LEVEL DELAY/CENTER + /REAR TEST RX-V392 9 1 ­ DELAY TIME + PROGRAM TEST EFFECT PROLOGIC ENHANCED ON/OFF EFFECT PROGRAM PROLOGIC ENHANCED ON/OFF 8 7 8 7 VCR TV/DBS DVD/LD VCR VIDEO DIR A DIR B REC/PAUSE PLAY DIR A DIR B REC/PAUSE PLAY 1 2 2 POWER A/B TAPE 1 6 2 2 POWER A/B TAPE ­ PRESET + A/B/C/D/E TUNER ­ PRESET + A/B/C/D/E TUNER 6 DISC PLAY CD DISC PLAY CD PHONO PHONO VOLUME VOLUME 3 4 SLEEP 3 5 4 SLEEP 5 18 English For Control of This Unit For Other Component Control Identify the remote control transmitter keys with your component's keys. On each key function, refer to the corresponding instruction on your component's manual. 1 DELAY/CENTER/REAR and TIME/LEVEL +/­ keys RX-V492 only Adjust the delay time (DELAY), the rear channel output level (REAR) and the center channel output level (CENTER). Select the item which you want to adjust by pressing the DELAY/CENTER/REAR key and adjust its time or level by pressing the TIME/LEVEL +/­ key. DELAY TIME +/­ key RX-V392 only Adjusts the delay time, or the time difference between the begining of source sound and the begining of effect sound. (For details, refer to page 33. ) 1 Tape deck keys Controls tape deck. [. . . ] A desired station cannot be tuned in with the automatic tuning method. A desired station cannot be tuned in with the automatic tuning method. AM FM There are continuous crackling and hissing noises. There are buzzing and whining noises (especially in the evening). Noises will result from ligtning, fluorescent lamps, motors, thermostats and other electrical equipment. Direct sunlight or lighting (of an inverter type of flourescent lamp etc. ) is striking the remote control sensor of the main unit. [. . . ]