User manual YAMAHA RX-V363

[. . . ] G RX-V363 AV Receiver Ampli-tuner audio-vidéo OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. 2 Install this sound system in a well ventilated, cool, dry, clean place ­ away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. [. . . ] Press EPRESET/TUNING l / h (or 7PRESET l / h) to select the desired preset station number (1 to 8). The preset station group and number appear in the front panel display along with the station band and frequency. 2 2 E1 : FM 87. 50MHz Flashes BASIC OPERATION 3 E1 : FM 87. 50MHz Select preset station "A5" using DA/B/C/D/E and EPRESET/TUNING l / h. "A5" and the MEMORY indicator flash in the front panel display. See "Selecting preset stations" on this page. Flashes MEMORY A5 : FM 90. 50MHz Flashes 4 Press BPRESET/TUNING again. "EXCHANGE E1­A5" appears in the front panel display and the assignments of the two preset stations are exchanged. English 39 En RADIO DATA SYSTEM TUNING (EUROPE AND RUSSIA MODELS ONLY) Radio Data System tuning (Europe and Russia models only) Radio Data System is a data transmission system used by FM stations in many countries. This unit can receive various Radio Data System data such as PS (program service), PTY (program type), RT (radio text), CT (clock time), and EON (enhanced other networks) when receiving Radio Data System broadcasting stations. Displaying the Radio Data System information Use this feature to display the 4 types of the Radio Data System information: PS (program service), PTY (program type), RT (radio text) and CT (clock time). The corresponding indicators light up in the front panel display (see page 20). Notes · You can select one of the Radio Data System display modes only when the corresponding Radio Data System indicator lights up in the front panel display. It may take a while for this unit to receive all of the Radio Data System data from the station. · You can select only the available Radio Data System display modes being offered by the station. · If the signals being received are not strong enough, this unit may not be able to utilize the Radio Data System data. In particular, the "RT" mode requires a large amount of data and may not be available even when the other Radio Data System display modes are available. · In case of poor reception conditions, press GTUNING AUTO/MAN'L on the front panel so that the AUTO indicator disappears from the front panel display. · If the signal strength is weakened by external interference while this unit is receiving the Radio Data System data, the reception may be cut off unexpectedly and ". . . WAIT" appears in the front panel display. · When the "RT" mode is selected, this unit can display the program information by a maximum of 64 alphanumeric characters, including the umlaut symbol. Unavailable characters are displayed with the "_" (underscore). · If the reception is cut off when the "CT" mode is selected, "CT WAIT" appears in the front panel display. 1 Tune into the desired Radio Data System broadcasting station. · We recommend using the automatic preset tuning to tune into the Radio Data System broadcasting stations (see page 38). · You can also use PTY SEEK mode to tune into the desired Radio Data System broadcasting station from the preset ones. Press 0INFO on the remote control repeatedly to select the desired Radio Data System display mode. PS PTY RT CT 2 Frequency display · Select "PS" to display the name of the Radio Data System program currently being received. · Select "PTY" to display the type of the Radio Data System program currently being received. · Select "RT" to display the information on the Radio Data System program currently being received. [. . . ] (2) Inadequate packaging or mishandling, when the product is in transit from the customer. Please note that it is the customer's responsibility to ensure the product is adequately packaged when returning the product for repair. (3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha's instructions on the proper use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country where it is used. (4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha's control. [. . . ]