User manual YAMAHA RX-V2092

[. . . ] NATURAL SOUND AV RECEIVER RX­V2092 CINEMA DSP 7ch DIGITAL/ PRO LOGIC ENHANCED MOVIE THEATER TV SPORTS STADIUM EFFECT DISCO ROCK CONCERT JAZZ CLUB CHURCH CONCERT HALL VOLUME l6 VCR 2 VCR 1 DVD/LD 28 20 l2 8 POWER VIDEO AUX TAPE (MD) TV/DBS 40 4 TUNER PHONO CD 60 2 A/B/C/D/E 1 2 3 4 5 6 7 8 0 ­dB l 0 l 2 3 4 2 3 4 l 0 l 2 3 4 2 3 4 l 0 SOURCE l 2 3 4 DVD/LD TV/DBS VCR 1 VCR 2 VIDEO AUX TAPE (MD) TUNER CD PHONO FM/AM MAN'L/AUTO FM DELAY/C/R DOWN TUNING UP /F/SWFR AUTO/MAN'L MONO SET MENU ON OFF 2 3 4 A B 5 5 5 5 L5 5R PHONES SPEAKERS BASS TONE EXTENSION BYPASS MEMORY EDIT TUNING MODE S VIDEO VIDEO L AUDIO R BASS TREBLE BALANCE REC OUT VIDEO AUX Natural Sound AV Receiver Récepteur audiovisuel "Son Naturel" OWNER'S MANUAL MODE D'EMPLOI SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 1 Read Instructions ­ All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions ­ The safety and operating instructions should be retained for future reference. 3 Heed Warnings ­ All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions ­ All operating and other instructions should be followed. [. . . ] Do not change any other volume setting in the system. * If the FRONT MIX switch on the rear panel is set to "ON (5ch)", the front effect speaker level cannot be adjusted by this method. 42 ADJUSTMENTS IN THE "SET MENU" MODE The following eight types of functions maximize the performance of your system and expand your enjoyment for audio listening and video watching. METHOD OF SETTING CHANGE AND ADJUSTMENT Operations should be made watching information on this unit's display panel or the monitor screen. If you want to display information on the monitor, turn the power of the monitor on. 1. If you will use the remote control unit, set the TIME/LEVEL·SET MENU switch to the SET MENU position on the remote control unit. NOTE: Be sure to use the remote control unit with the lid open. Remote control TIME/LEVEL English 1. Select the function (title) on which you will make a change. Front panel Remote control SET MENU or 3. Select any desired position or edit parameters on the function. Front panel Remote control or In the same way, make a setting change or adjustment on any other function. 43 DESCRIPTIONS OF THE FUNCTIONS 1. CENTER DELAY (Adjusting the delay of center sounds (dialog etc. )) Control range: 0 ms to 5 ms (in 1 ms step) Preset value: 0 ms * This adjustment is effective only when the Dolby Digital (AC-3) is decoded and the signals of selected source encoded with the Dolby Digital (AC-3) contain center-channel signals. Adjusts the delay between the main sounds (at the main channels) and dialog etc. This is for making sounds from the left main, center and right main speakers reach your listening position at the same time by delaying the sound from the center speaker if the distance from the center speaker to your listening position is shorter than the distance from the left or right main speaker to your listening position. 2. DYNAMIC RANGE (Adjusting dynamic range) Choices: MAX/STD/MIN Preset position: MAX * This adjustment is effective only when the Dolby Digital (AC-3) is decoded. MAX: "Dynamic range" is the difference between the maximum level and the minimum level of sounds. Sounds on a movie originally designed for movie theaters feature very wide dynamic range. Dolby Digital (AC-3) technology can bring the original sound track into a home audio format with this wide dynamic range unchanged. In this position, a source encoded with the Dolby Digital (AC-3) is reproduced in the original sound track's wide dynamic range providing you with powerful sounds like a movie theater. Selecting this position will be more ideal if you can listen to a source in a high output level in a room specially soundproofed for audio/video enjoyment. STD (Standard): Powerful sounds of extremely wide dynamic range are not always suitable for home use. Depending upon the condition of your listening environment, it may not possible to increase the sound output level as high as a movie theater, however, in a level proper for listening to in your room, the low level parts of source sound cannot be heard as well because they will be lost among noises in your environment. Dolby Digital (AC-3) technology also makes it possible to reduce an original sound track's dynamic range for a home audio format by "compressing" the data. In this position, a source encoded with the Dolby Digital (AC-3) is reproduced in the "compressed" dynamic range of the source suitable for low level listening. MIN: In this position, dynamic range is more reduced than in the STD position. Selecting this position will be effective when you must listen to a source in extremely low level. 44 English 3. LFE LEVEL (Adjusting the output level at the LFE (low frequency effect) channel) Control range: ­20 dB to 0 dB (in 1 dB step) Preset value: 0 dB * This adjustment is effective only when the Dolby Digital (AC-3) is decoded and the signals of selected source encoded with the Dolby Digital (AC-3) contain LFE signals. 8. INPUT MODE (Selecting the initial input mode of the sources connected to the TV/DBS input jacks) For the sources connected to the TV/DBS input jacks of this unit only, you can designate the input mode that is automatically selected when the power of this unit is switched on. AUTO: In this position, the AUTO input mode is always selected when the power of this unit is switched on. [. . . ] 1 Vp-p/75 S-Video Signal Level Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 286 Vp-p/75 Maximum Input Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 1. 5 Vp-p Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]