User manual YAMAHA RIO3224-D/RIO1608-D ANNEXE 3

[. . . ] Owner’s Manual Keep This Manual For Future Reference. EN Contents PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Firmware Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Precautions for Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Recessed Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Accessories (Please check the package contents. ) • Owner’s Manual • AC power cable • Dante Virtual Soundcard license code About Dante . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Daisy Chain Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Star Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The PEAK indicators also function as error indicators: the indicators for all channels will flash if an error occurs. 5 [UNIT ID] Rotary Switch This rotary switch enables you to set an ID number so that connected devices will recognize the Rio. The UNIT ID must be a unique number in the network so that the Rio will be able to transmit and receive audio signals over a Dante network, or be controlled from a connected digital mixing console. Otherwise, the ID setting will not be effective. Owner’s Manual 9 Controls and Functions 6 DIP Switches These switches enable you to specify the settings related to the startup operation of the unit. • Switch 1 (UNIT ID) This switch setting determines whether the hexadecimal setting of the [UNIT ID] rotary switch will range from 0 to F or from 10 to 1F. Switch Setting UNIT ID ranging from 0 to F UNIT ID ranging from 10 to 1F Description The setting range of the [UNIT ID] rotary switch is from 0 to F. The setting range of the [UNIT ID] rotary switch is from 10 to 1F. 1 1 • Switches 2 and 3 (IP SELECT MODE) These switches determine how the IP address is specified during communication with the connected computer or other devices. Switch Setting AUTO IP Description Dante networks will automatically assign the IP address. • Switch 4 (SECONDARY PORT) This switch setting determines whether the rear-panel [SECONDARY] connector will be used for a daisy chain or redundant network. With the [DAISY CHAIN] setting, you can connect multiple Dante-enabled network devices in a daisy chain without using a network switch. Refer to “Daisy Chain Network” in the “About Connections” section (see page 13) for more information about daisy chain connections. With the [REDUNDANT] setting, the [PRIMARY] connector will be used for primary connections, and the [SECONDARY] connector will be used for secondary (backup) connections. If the unit is unable to transmit signals through the [PRIMARY] connector for some reason (e. g. , due to damage or accidental removal of the cable, or a failed network switch), the [SECONDARY] connector will automatically take over communications and functions on the redundant network. Refer to “About Redundant Networks” in the “About Connections” section (see page 13) for more information on redundant networks. Switch Setting DAISY CHAIN Description The [SECONDARY] connector is used for a daisy chain connection. A signal at the [PRIMARY] connector will be transmitted to the next device in the chain as is. It will function as backup connection, independent of the network to which the [PRIMARY] connector is connected. 4 2 3 DHCP REDUNDANT The IP address assigned by the DHCP server will be used. The IP address will be set to 192. 168. 0. xx (xx=UNIT ID). 2 3 STATIC IP (AUTO) 4 2 3 10 Owner’s Manual Controls and Functions • Switches 5 and 6 (REMOTE) When you plan to monitor or control the Rio from a digital mixing console, these switches determine whether to use an Rio-native device (such as a CL series product) or a non-Rio-native device. Information on which devices feature Rio-native support is available at the Yamaha pro audio website product page: http://www. yamahaproaudio. com/products/ Switch Setting NATIVE Description An Rio-native device will control the Rio. 7 [SYSTEM] Indicators These indicators show the Rio’s operating status. If the green indicator lights steadily and the red indicator turns off, the unit is operating normally. When power to the unit is turned ON, if the green indicator turns off, or if the red indicator lights or flashes, the unit is not functioning properly. In this case, refer to the “Messages” section (see page 17). 8 [SYNC] Indicators These indicators show the operating status of the Rio’s internal Dante network capability. If the green indicator lights, the unit is operating as a word clock slave and synching to the word clock. If the green indicator flashes, the unit is operating as the word clock master. If the power to the unit is turned on but the green indicator is turned off, the unit is not functioning properly. In this case, refer to the “Messages” section (see page 17). If the orange indicator lights or flashes, refer to the “Messages” section. 5 6 AD8HR 5 6 A non-Rio-native device will control the Rio as AD8HRs. [. . . ] reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Owner’s Manual 21 For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. [. . . ]