User manual YAMAHA R-N500

[. . . ] Fm Page 1 Tuesday, July 30, 2013 10:47 AM G Network Receiver Réseau Ampli-Tuner OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ © 2013 Yamaha Corporation Printed in Malaysia ZH44740 English Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Top: 30 cm (11-3/4 in) Rear: 20 cm (7-7/8 in) Sides: 20 cm (7-7/8 in) 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. [. . . ] You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p. 3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10. (as of August 2013) • If you press the DISPLAY repeatedly, you can switch the playback information on the front display (p. € You can turn on the unit automatically when starting playback on iTunes or iPod by setting “NET Standby” (p. € You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p. € If you select the other input source on the unit during playback, playback on the iTunes/iPod stops automatically. € You can adjust the unit’s volume from the iTunes/iPod during playback. Caution • When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. If the volume suddenly increases during playback, stop playback on the iTunes/iPod immediately. Playback of iTunes/iPod music contents Follow the procedure below to play back iTunes/iPod music contents on the unit. Changes the Repeat settings Changes the Shuffle settings e b a 1 Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. IPod (example) Repeat Shuffle iTunes (example) Note To control iTunes playback with the remote control of the unit, you need to configure the iTunes preferences to enable iTunes control from remote speakers in advance. ITunes (example of English version) Note If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly. 2 On the iTunes/iPod, click (tap) the AirPlay icon and select the unit (network name of the unit) as the audio output device. IPod (example) iTunes (example) Check this box Network name of the unit 28 En SWITCHING INFORMATION ON THE FRONT DISPLAY Switching information on the front display When you select USB or a network source as the input source, you can switch playback information on the front display. hOME SETUP NOW PLAYING OPTION ENTER DISPLAY RETURN VOLUME DISPLAY TOP MENU POP-UP MENU MUTE 1 Press DISPLAY. SP A Song Item name BASIC OPERATION About 3 seconds later, the corresponding information for the displayed item appears. SP A Track #1 Information Input source USB (iPod) SERVER AirPlay NET RADIO Item Song (song title), Artist (artist name), Album (album name), Time Song (song title), Album (album name), Station (station name), Time English 29 En ADVANCED OPERATION Configuring playback settings for different playback sources (OPTION menu) Configuring playback settings for different playback sources (OPTION menu) You can configure separate playback settings for different playback sources. HOME SETUP NOW PLAYING ■ Volume Trim OPTION VOLUME OPTION Cursor keys ENTER RETURN ENTER DISPLAY RETURN Corrects volume differences between input sources. If you are bothered by volume differences when switching between input sources, use this function to correct it. 0 dB Volume Trim 2 y To return to the previous state during menu operations, press RETURN. ■ Signal Info Choices FORMAT CHAN SAMPL Displays information about audio signal. [. . . ] Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. [. . . ]