User manual YAMAHA QY100

[. . . ] Owner's Manual SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over , or roll anything over power or connecting cords of any kind. IF you must use an extension cord, the minimum wire size for a 25' cord (or less ) is 18 AWG. [. . . ] Press the [EXIT] button to return to the job list, or a mode button to go directly to the selected mode. 158 The Song Jobs s NOTE · The Shift Clock job will not shift data beyond the specified measure range. Events near the beginning and end of the specified range may therefore sound "bunched" together in some cases. · Since the Shift Clock job actually shifts the timing of all notes and other events in the specified measures forward or backward, it can significantly alter the "feel" of the song. You could move the notes forward ("+" settings) to create a more "laid back" feel, or backward ("-" settings) to produce a more "driving" feel. Of course, you can also use Shift Clock to correct timing that is off in the first place. ;; ;; 159 The Song Jobs 07 : Chord Sort Sorts all notes in the specified measure range which fall on the same beat (i. e. chords) so that the notes are arranged in order from lowest to highest or from highest to lowest. First measure Last measure First beat Last beat The "TR" parameter selects the track to be affected by the Chord Sort job: "01" . . . The "M" parameters above the graphic bar are used to specify the first measure:beat and last measure:beat of the range to be modified. The "Type" parameter determines whether the chords in the specified range are arranged from lowest to highest note ("Normal") or from highest to lowest note ("Reverse"). After setting the parameters as required press [ENTER] to execute the Chord Sort job. The metronome icon will appear on the display while the data is being processed, then "Completed !" will appear briefly when the job is done. Press the [EXIT] button to return to the job list, or a mode button to go directly to the selected mode. 160 The Song Jobs 08 : Chord Separate Shifts each note in the specified measure range which falls on the same beat (i. e. chords) forward in order from lowest to highest or vice versa according to the Chord Sort settings, by the specified number of clocks, thus "separating" the chord notes by the specified number of clocks. First measure Last measure ;; ;; First beat Last beat The "TR" parameter selects the track to be affected by the Chord Separate job: "01" . . . The "M" parameters above the graphic bar are used to specify the first measure:beat and last measure:beat of the range to be modified. The "Clock" parameter determines the number of clocks by which the notes of the chord will be separated: "000" through "999". After setting the parameters as required press [ENTER] to execute the Chord Separate job. The metronome icon will appear on the display while the data is being processed, then "Completed !" will appear briefly when the job is done. Press the [EXIT] button to return to the job list, or a mode button to go directly to the selected mode. 161 The Song Jobs 09 : Copy Event Copies all data from a specified range of measures from one track to the specified measure in the specified destination track. This operation overwrites the data from the beginning of the specified destination measure with the data from the source measures. Previous data in the overwritten measures is therefore lost. Chord template parameter The upper "TR" parameter selects the source track -- i. e. "16" for the sequencer tracks, the accompaniment "Pt" track, the accompaniment "Cd" track, the "Tm" track, or "Al" (All) tracks. When "Pt", "Cd", Tm" or "Al" is selected, the lower "TR" parameter is automatically set to the same track. The lower "TR" parameter selects the destination track -- i. e. "16" for the sequencer tracks, the accompaniment "Pt" track, the accompaniment "Cd" track, the "Tm" track, or "Al" (All) tracks. [. . . ] 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 25/F. , United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. [. . . ]