User manual YAMAHA PSR-8000

[. . . ] SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. Please observe all cautions indicated on this page and those indicated in the safety instruction section. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. [. . . ] 99 Select the EDIT, NAME/CLEAR/DISK, or STORE AS CUSTOM VOICE display via the and LCD button to the right of the display, then use the v and w LCD buttons to the left of the display to select the desired function. LCD button can be used to switch between the In all edit displays except ADD WAVE (see below) the currently selected waveform and the currently selected panel voice. While in the WAVEFORM EDIT mode, the LCD button in the upper left corner of the display will take you directly to the WAVE EDIT mode (page 93). The [EXIT] button will take you back to the SAMPLING MENU. s EDIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1: SELECT WAVEFORM Use the WAVEFORM LCD dials to select the waveform to be edited. 2: ADD WAVE This function can be used to add a wave from a different waveform to the currently selected waveform. When a waveform contains two or more waves, the individual waves must be assigned to different areas of the keyboard (the waves cannot be "layered"). Use the SOURCE WAVEFORM LCD dials to select the waveform containing the wave to be added, and the SOURCE WAVE LCD dials to select the wave to be added. Use the START NOTE LCD dials to specify the note from which the added wave will begin playing. The START NOTE can also be specified by pressing the appropriate key on the keyboard while holding the [DIRECT] button. For example, if you select C3 as the START NOTE, the original wave will play up to B2, and the 97 QQQQQQQQQQQQQQQQQ , , , , , , , , , , , , , , , , , QQQQQQQQQQQQQQQQQ , , , , , , , , , , , , , , , , , Sampling added waveform will play from C3 up. Press the ADD LCD button to actually add the selected wave. · The same wave cannot be added for use in multiple keyboard ranges. monitor LCD button · When the ADD WAVE function is selected the switches between the source wave, destination wave, and panel voice. 3: MOVE START NOTE/VOLUME/DELETE WAVE Use the WAVE LCD dials to select a wave to be edited. The START NOTE LCD dials can be used to move the start note of the selected wave (see "ADD WAVE", above). The START NOTE can also be changed by pressing the appropriate key on the keyboard while holding the [DIRECT] button. When the START NOTE of a wave is change, the range of the next lowest wave in the waveform will expand or contract accordingly. The VOLUME LCD dials adjust the volume of the selected wave in relation to other waves in the waveform. When a wave is deleted the range of the next lowest wave will expand to include the range originally covered by the deleted wave. its START NOTE is C-2) the range of the next highest wave will expand downward to include the range of the deleted wave. The last wave in the waveform cannot be deleted. s NAME/CLEAR/DISK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1: WAVEFORM NAME Enter an original name for the selected waveform as described on page 21. Operation is the same as in the WAVE EDIT mode EXPORT AS WAV function (page 96). Operation is the same as in the WAVE EDIT mode (page 96). 98 QQQQQQQQQQQQQQQQQ , , , , , , , , , , , , , , , , , QQQQQQQQQQQQQQQQQ , , , , , , , , , , , , , , , , , Sampling s STORE AS CUSTOM VOICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1: CUSTOM VOICE NAME Enter an original name for the custom voice as described on page 21. 2: STORE AS CUSTOM VOICE This function stores the current waveform as a custom voice which can be edited via the CUSTOM VOICE CREATOR (page 51) or selected via the VOICE [CUSTOM VOICE] button and played on the PSR-8000 keyboard in the same way as the other voices. Use the STORE AS CUSTOM VOICE LCD dials to select the CUSTOM VOICE number to which you want to store the waveform, then press the EXECUTE LCD button. · The corresponding waveform must also be saved to disk in order to use the stored custom voice the next time the PSR-8000 is turned on. [. . . ] Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 ITALY Yamaha Musica Italia S. P. A. , Home Keyboard Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 ASIA HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 730-1098 SPAIN Yamaha-Hazen Electronica Musical, S. A. Jorge Juan 30, 28001, Madrid, Spain Tel: 91-577-7270 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. [. . . ]