User manual YAMAHA PSR-5700 2

[. . . ] Advanced Features Programmieranleitung Fonctions avancées Características avanzadas MANUAL DE INSTRUCCIONES MODE D'EMPLOI BEDIENUNGSANLEITUNG OWNER'S MANUAL The PSR-5700 Advanced Features manual contains operating instructions for the instrument's more complex and advanced features. If you are yet familiar with PSR-5700's basic features and the way it works in general, we recommend that you go through the PSR-5700 Getting Started manual prior to attempting to use the features described in this manual. Contents The Sequencer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 s Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 s Deleting Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The name of the selected file will be displayed to the right of the number, and the size of the file in kilobytes (approximate) will be shown on the upper display line. When the file number has been specified, press the right [+] button under "YES" on the display to execute the load operation (or press the [-] button under "NO" on the display to cancel the operation). "Don't remove disk" will appear while the data is being loaded, and the amount of remaining data to be loaded will be displayed in arbitrary units on the upper display line. "Completed!" will appear when the data has been successfully loaded. The [FROM DISK] button allows all data in a file to be loaded at once. To load individual data groups use the FROM DISK function described on page 45. See page 48 for a list of error messages that may appear during a disk load operation. 44 [F5] Disk The [F5] DISK Functions The [F5] DISK function accesses a range of functions that are used for storage and retrieval of floppy disk data. Not Found Disk ! If you select the [F5] when no disk is present in the drive, the "Not Found Disk!" error message will appear on the display. 1 FROM DISK · First Screen Procedure: ­ + `FROM DISK Size: 35k 00:N_FILE00 : AllData ­ + · Second Screen (When SEQUENCER selected) `FROM DISK Size: 2k Song=1 -> Song=1 ­ + ­ + (When optional disk "AllData" or "Disk Style" selected) `FROM DISK 1-16Slow ­ + Size: 29k Use the left [-] and [+] buttons to select the number of the file to load (00 -- 99). The name of the selected file will be displayed to the right of the number, and the size of the file in kilobytes (approximate) will be shown on the upper display line. The right [-] and [+] buttons can be used to select the type of data to be loaded, as shown in "Notes:" below. When the file and data type have been specified, press the [>] button to select the next display screen, and press the right [-] and [+] buttons under "-YES-" on the display simultaneously to execute the load operation. "Don't remove disk" will appear while the data is being loaded. "Completed!" will appear when the data has been successfully loaded. Notes: The following data types can be selected for loading: · AllData . . . . . . . . Sequencer song data. · Second/Third Screen (When optional disk "AllData", "Disk Style", or "Sequencer" selected) `FROM DISK Are you sure? - YES ­ + Purpose: Loads the specified file from a floppy disk inserted into the PSR-5700 disk drive. 45 [F5] Disk 2 TO DISK "TO DISK _ 00:N_FILE00 ­ + Size:---k - YES ­ + When the file number has been specified, press the right [-] and [+] buttons under "-YES-" on the display simultaneously to execute the save operation. "Don't remove disk" will appear while the data is being saved. "Completed!" will appear when the data has been successfully saved. Purpose: Saves the data listed in "Notes:, " below, to a floppy disk inserted into the PSR-5700 disk drive. Notes: The following data are saved to disk when the save operation is executed: · Instrument setup (condition) data. · Sequencer song data. Procedure: With the underline cursor located under the file number parameter at the left of the lower display line (use the [>] button to move the cursor if necessary), use the left [-] and [+] buttons to select the number of the file to save (00 -- 99). If a file with the selected number already exists on the disk, the name of the selected file will be displayed to the right of the number (if no name has been assigned, "N_FILE" will appear), and the size of the file in kilobytes (approximate) will be shown on the upper display line. The cursor can be moved to the various character positions (8 characters maximum) in the file name by using the [<] and [>] buttons, and the name can be edited by selecting the appropriate characters for each position via the left [-] and [+] buttons. All data is saved in one operation. See page 48 for a list of error messages that may appear during disk save. The PSR-5700 identifies and handles disk files by number rather than the file name. If you save to a file number that already contains data, the original data will be erased and replaced by the new data. IMPORTANT 3 RENAME FILE £RENAME FILE Size: 32k _ 00:N_FILE00 - YES ­ + ­ + Purpose: Allows the name of the file having the specified file number to be changed as required. file name and the name edited by selecting the appropriate characters for each position via the left [-] and [+] buttons. When the new file name has been entered, press the right [-] and [+] buttons under "-YES-" on the display simultaneously to register the new name. "Completed!" will appear when the new name has been successfully registered. [. . . ] R: Receive only) 11110000 01000011 01110110 00000100 0gggnnnn 0ccccccc 0ddddddd 11110111 F0H 43H 76H 04H gn cc dd F7H Status YAMAHA ID Substatus Section No. = 6 (Portable Keyboard) g=0, n:Local Device Number cc: Controller number Data EOX g cc dd Parameter REVERB OFF REVERB ON REVERB TYPE 1 : REVERB TYPE 23 EFFECT OFF EFFECT ON EFFECT TYPE 1 : EFFECT TYPE 9 PANEL REGISTRATION A1 PANEL REGISTRATION B8 PAD MULTI PAD TEMPO PAD PERCUSSION REPEAT/SYNC/ BREAK OFF REPEAT/SYNC/ BREAK ON PAD REC/STOP OFF (When released) PAD REC/STOP ON (When pressed) SONG SELECT 1 : SONG SELECT 6 Function REVERB/EFFECT (Refer to "3 BYTE DATA" for each part) Transmitted when ON. 1BYTE DATA g 0 cc dd Parameter PRESET 0:0 : PRESET 5:5 CUSTOM 0 : CUSTOM 5 DISK OFF SF FC MB OFF (Release button) INTRO. /FILL1 ON (Press) INTRO. /FILL2 ON (Press) INTRO. /ENDING ON (Press) SYNCHRO START ON (Press) -6 : 2's complement -1 of 7 bits. 2v1 SSP OFF SSP 1 : SSP 4 KEY VELOCITY OFF KEY VELOCITY ON Function RHYTHM STYLE 0EH 00H 01H 02H : 18H 40H 41H 42H : 4AH 11H 00H : 0FH 12H 01H 02H 03H 06H 07H O X DOC/GM1 PANEL REGISTRATION O X Remote 00H 00H : 23H 24H : 29H 2AH 01H 00H 01H 02H 03H 03H 00H 01H 02H 04H 00H 05H 00H 08H 7AH : 7FH 00H : 06H 0BH 01H 07H 08H 0CH 00H 01H : 04H 0DH 04H 05H O X MULTI PAD O X ABC Includes ABC ON INTRO. /FILL IN O X 08H 09H O X 15H 09H : 0EH 17H 18H 19H 1CH 1DH 1FH INTRO. /ENDING SYNCHRO START TRANSPOSE O O R X X X ORCHESTRATION O X SUPER STYLE PLAY O X KEY VELOCITY R X 00H~7FH CHORD 1 VOL. 2 20H 00H HARMONY OFF 01H HARMONY ON 02H HARMONY TYPE 1 : : 11H HARMONY TYPE 16 22H 00H DEMO OFF 01H DEMO ON 23H 00H VOICE REGIST: RATION 1 09H VOICE REGISTRATION 10 SEQUENCER SONG SELECT (Sequencer mode selected when received) CHORD 1 VOL. VOICE PART SELECT O X O O O O O O X X X X X X HARMONY Transmitted when ON. [. . . ]