User manual YAMAHA PG1

[. . . ] You can confirm that the stored Mixing Voice is assigned to the Part selected in step 1. NOTICE After the above operations, make sure to execute the Song/ Pattern Store. Otherwise, the Mixing Voice assignment will be lost when turning the power off or selecting the different Song/ Pattern. NOTE This operation will cancel the link between all the Voices and the original Waveform, then make a new link between the same Voices and the Waveform copied to the Sampling memory. 3 4 5 Edit the Waveform in the sampling memory by using the Sampling Edit and Sampling Job operations. [. . . ] Otherwise, the Mixing Voice assignment will be lost when turning the power off or selecting the different Song/ Pattern. NOTE This operation will cancel the link between all the Voices and the original Waveform, then make a new link between the same Voices and the Waveform copied to the Sampling memory. 3 4 5 Edit the Waveform in the sampling memory by using the Sampling Edit and Sampling Job operations. From the [F3] Other display of the Sampling Job, select "03:Copy to Flash Memory" then press [ENTER]. Copy the edited Waveform from the sampling memory to the Flash Memory Expansion Module. At , confirm that the edited Waveform number is shown. At , select whether or not the original wave on the Sampling Memory is to be deleted. After these operations, press [ENTER]. EN 1 New Functions in MOTIF XF Version 1. 10 NOTE This operation will cancel the link between all the Voices and the edited Waveform on the Sampling Memory, then make a new link between the same Voices and the Waveform copied to the Flash Memory Expansion Module. 2 Select the target memory ("USR" "FL1" or "FL2") , at , then select the Waveform number at . All the Waveforms having the same name are listed on the "Same Name Waveforms" section of the display. Additional menus in Sampling Edit/Sampling Main display With this new version, "[F3] Normalize, " "[F4] Slice, " and "[F5] Remix" have been added to the Sampling Edit display and Sampling Main display respectively, allowing you to more easily call up these displays. NOTICE This Job will delete all Waveforms with the same name except for the selected Waveform, even if they contain different data. 3 Press [ENTER] to execute the Job. This operation will delete all the Waveforms with the same name except for the selected Waveform. NOTE This operation will cancel the link status between the Voices and deleted Waveforms, then make a new link between the same Voices and the undeleted Waveforms respectively. Revision of Key Bank number assignment after Sampling The method of the Key Bank number assignment has been changed from the previous version. In the previous version, "1" was assigned to the Key Bank of the latest Sampling and the rest of the Key Bank numbers were increased by 1. NOTICE After the above operations, make sure to execute the Voice Store operation. Otherwise, the Voice will be lost when turning the power off or selecting a different Voice. When entering the Song mode or Pattern mode in step 2: Exit from the File mode, select the corresponding Part of the Song or Pattern then play the keyboard to check the sound. NOTICE After the above operations, make sure to execute the Song/ Pattern Store operation. Otherwise, the Sampling Voice Favorite window [F1] Main Pressing this will move the cursor to Main column. [F2] Sub Pressing this will move the cursor to Sub column. New Functions in MOTIF XF Version 1. 10 3 [F3] List Pressing this will move the cursor to Arpeggio List. [F4] Favorite Pressing this will call up the Favorite window. [F5] Set/Clear Pressing this will register the current Arpeggio Type to the Favorite Category, or remove the current Arpeggio Type from the Favorite Category. With the checkboxes listed at left, you can confirm whether or not each Arpeggio Type is registered. [F6] All Clear By pressing this then [INC/YES], you can remove all the registered Arpeggio Types from the Favorite Category. [SF1] ARP1 ­ [SF5] ARP5 Pressing each of these will change the Arpeggio Type from the current one. Favorite window [F1] Main Pressing this will move the cursor to Main column. [SF6] All / Filtered Pressing this will toggle the indication between "All" and "Filtered. " Pressing [SF6] All will show all the Arpeggio types of the current Category on the Arpeggio List. Pressing [SF6] Filtered will show only representative Types picked up from all Types on the Arpeggio List. [F2] Sub Pressing this will move the cursor to Sub column. [F3] List Pressing this will move the cursor to Waveform List. [F4] Favorite Pressing this will call up the Favorite window. Favorite window Indicates the Arpeggio Types registered to the Favorite Category. Pressing [F4] Category will return to the Arpeggio Category Search display. [F5] Set/Clear Pressing this will register the current Waveform to the Favorite Category, or remove the current Waveform from the Favorite Category. [. . . ] Pressing [SF6] Filtered will show only representative Types picked up from all Types on the Arpeggio List. [F2] Sub Pressing this will move the cursor to Sub column. [F3] List Pressing this will move the cursor to Waveform List. [F4] Favorite Pressing this will call up the Favorite window. Favorite window Indicates the Arpeggio Types registered to the Favorite Category. Pressing [F4] Category will return to the Arpeggio Category Search display. [F5] Set/Clear Pressing this will register the current Waveform to the Favorite Category, or remove the current Waveform from the Favorite Category. With the checkboxes listed at left, you can confirm whether or not each Waveform is registered. [F6] All Clear By pressing this then [INC/YES], you can remove all the registered Waveforms from the Favorite Category. [SF6] All / Filtered Pressing this will toggle the indication between "All" and "Filtered. " Pressing [SF6] All will show all the Waveforms of the current Category on the Waveform List. [. . . ]