User manual YAMAHA NUAGE V1.1 SUPPLEMENTARY MANUAL

[. . . ] • Upgrades to the NUAGE Workgroup Manager application and system software and any changes made to functionality and/or specifications will be announced on the following website. http://www. yamahaproaudio. com/ • Windows is a registered trademark of Microsoft® Corporation in the United States and other countries. • Apple, Mac, and Macintosh are trademarks of Apple Inc. , registered in the U. S. • Company and product names used in this manual are trademarks or registered trademarks of their respective companies. [. . . ] Adding Nuage Fader, Nuage Master, DAW Application such as Nuendo, and the like to a Workgroup in this way makes it possible to control Nuendo from the Nuage Fader and Nuage Master devices. Launching & Shutting Down Launching NUAGE Workgroup Manager launches automatically when you start up your computer. If you have shut down NUAGE Workgroup Manager and wish to re-launch it, use the Start menu or screen in Windows or the Applications in OS X. Shutting down Windows Right-click the NUAGE Workgroup Manager icon in the system tray and select Quit. Mac Click the NUAGE Workgroup Manager icon in the menu bar and select Quit. NUAGE Workgroup Manager Operation Manual 3 Using the Application Using the Application Adding devices or DAW applications to the Workgroup Devices and DAW applications can be added to the Workgroup using the Main window (page 7). (The Main window is displayed when NUAGE Workgroup Manager is opened. ) 5. Click  to add the device or DAW application to the Workgroup area in the upper half of the window. 1. Connect the devices and the computers running the DAW applications using Ethernet cables. 2. Turn on the devices and launch the DAW applications. NOTE When you turn on a device or launch a DAW application for the first time, you will be asked to confirm whether you want to add it to the Workgroup. In the event that this confirmation message is not displayed, carry out the procedure from Step 3 below to add the device or DAW applications manually. 3. Double-click the NUAGE Workgroup Manager icon in the system tray (Windows) or menu bar (Mac) to open NUAGE Workgroup Manager. Identifying a device or DAW application To identify any device or DAW application displayed in NUAGE Workgroup Manager, click the corresponding Identify button on the Main window (page 8). When you do so, the lamp on the device or DAW application will respond by flashing for a few seconds. 4. Select a device or DAW application in the Device/DAW List area in the lower half of the window. NUAGE Workgroup Manager Operation Manual 4 Using the Application Configuring devices and DAW applications To configure any device or DAW application displayed in NUAGE Workgroup Manager, click the corresponding Property button. When you do so, a setting window for the device or DAW application will be displayed. When you click Identify, the lamp on the corresponding device or DAW application will respond by flashing for a few seconds. It should be noted that this action is not possible when the Active indicator for the device or DAW application is turned off. It is also not possible for Pro Tools. ) Property Overview The Property window displays information about the selected device or DAW application. To open this window, click Property (page 8) on the Main window. Component names and functions Click to open the Property window (page 8). ! 1 2 4 5 3 Click to add the device or DAW application selected in the Device/DAW list to the Workgroup and move it to the Workgroup area. @  Click to remove the device or DAW application selected in the Workgroup area from the Workgroup. # Unavailable Workgroup Member 1 Name This area displays devices and DAW applications not added to the current Workgroup. If your computer is fitted with more than one network adaptor, devices and DAW applications from any network connected via an adaptor not selected under Network Interface on the Setup window will be grayed out. The lock icon will change depending on whether or not the device or DAW application in question has been added to another Workgroup. Added to another Workgroup: Not added to another Workgroup: This field displays the name of the device or DAW application. To change a name, you can simply click Property for the device or DAW application in the Workgroup area of the Main window. 2 Version This item displays the current version (shown as “x. x. x” here). Specifically, it displays the firmware version for devices, the NUAGE Extension version for Nuendo, and the NUAGE PT Bridge version for Pro Tools. 3 Check for Update Click to confirm via the Internet whether a device's firmware is up-to-date. If a newer version is available, please install it according to the on-screen instructions. 4 MAC Address This item displays the MAC address. 5 Status If a problem has occurred on the device, an error message will be displayed here. NUAGE Workgroup Manager Operation Manual 8 Descriptions of Windows Setup window 1 Network Interface This drop-down list is used to select the network adaptor on your computer that will be used with NUAGE Workgroup Manager. 2 Auto Register Select this check box to turn the Automatic Registration function on and clear to turn it off. [. . . ] If a newer version is available, please install it according to the on-screen instructions. 4 MAC Address This item displays the MAC address. 5 Status If a problem has occurred on the device, an error message will be displayed here. NUAGE Workgroup Manager Operation Manual 8 Descriptions of Windows Setup window 1 Network Interface This drop-down list is used to select the network adaptor on your computer that will be used with NUAGE Workgroup Manager. 2 Auto Register Select this check box to turn the Automatic Registration function on and clear to turn it off. If devices or DAW applications not currently in the Workgroup are identified on the network while this function is on, you will be asked whether or not you wish to add them to the Workgroup. 3 KVM Serial Data These fields are used to enter the ASCII messages to be sent to KVM switches in order to switch them. For details on this data, refer to the manual that came with the KVM switch in question. Control character LF CR \ Text to be entered \n \r \\ Overview The Setup window is used to configure communication settings. [. . . ]