User manual YAMAHA MTS-810A MTS-810B MTS-410A MBS-810A MSS-810A

[. . . ] Placing the stand on uneven surfaces such as uneven flooring or stairs may cause the stand to become unstable or overturn. Please hold the tom itself to keep the weight balance of the whole instrument. ? [MTS-410A] When attaching/removing the instrument, do not ? Always ? When ? [MTS-410A] Since the upper pipe is slightly bent, the push? When folding the stand, watch your fingers so they do not become pinched in the folding supports. [. . . ] Spread the legs of the stand and secure them by tightening wing bolt (A). ? When the toms are attached to the stand, the holder can be removed. * Position the feet and the catcher as shown in the illustration below. Align the frame of the multi tom holder with the catcher on the stand and insert the holder until it stops. the upper pipe, and re-tighten wing bolt (B) securely after adjustment. Furthermore, to prevent the toms from slipping down during performance, push the position clamp against the mounting base and securely tighten its screw using a drum key. Loosen wing bolt (B) to adjust the height of the drum-heads by raising or lowering ?Alignez le chssis du support multi-tom avec le berceau du stand et introduisez-y le support jusqu?Configuration Trio / ??? Chssis du support des toms ????? Berceau / ??? Berceau / ??? 4. /Drum Mouning Illustrations ??????????????????????????????????????????Please refer to the following illustrations when mounting your bass drum on the stand. For all MB-4000 or 400 series drum sizes * To mount a MB-4000 or 400 series bass drum, the arm mounting position needs to be changed. Attach the four arms at the inner holes of the stand, referring to the illustration below. Fully spread the legs of the stand and secure them by tightening wing bolt (A). * Position the legs and the arm base as shown in the illustration (left). The proper arm base direction and arm mounting position depend on the size of the bass drum. Refer to the drum mounting illustrations (left) for proper setting of the drum stand. Place the drum on the stand and position the arms tightly against the drum. [. . . ] * Position the legs and the arm base as shown in the illustration (left). The proper arm base direction and arm mounting position depend on the kind and the size of the drum. Refer to the drum mounting illustrations (left) for proper setting of the drum stand. [. . . ]