User manual YAMAHA MCR-140

[. . . ] G MCR-040/140 MICRO COMPONENT SYSTEM MICRO-CHAINE OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ Printed in China WS48510 CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. Note The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. Model IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. [. . . ] You can go back to a previous parameter by pressing *3 To set additional items, repeat steps 2 to 5. – Setting dimmer, tone/balance and power saving mode DIMMER: Changes the brightness of the front panel display. BALANCE: Adjusts the volume level of each left and right speaker channel. POWER SAVING: If you set to ECO, you can reduce standby power consumption. However, you cannot turn on the unit by playback operation on your iPod during standby mode. WIRELESS SW: Set to YES when you use a subwoofer via the wireless subwoofer kit (SWK-W10, etc. English 11 En USING USEFUL FUNCTIONS ■ Adjusting the clock AUTO CLOCK: Automatic adjustment function is available for Europe, U. Y The current time appears on the front panel display for a certain period by pressing and holding DISPLAY if the time setting has completed. Note The time setting is lost once the power cable is disconnected from the wall outlet. – Setting the timer TIMER SET: To select the following setting items, repeat steps 3 and 4 on page 11. Time (hour and minute) Running time You can choose the running time from 10 minutes to 90 minutes in 10 minute increments. €– –” means the unit will not be set to standby mode automatically. Input source and track/file number or preset number Notes • If the source is not set properly, the timer sound will not be heard. € MCR-140: When you select an iPod as the input source, you need to set the iPod in the charging cradle on the unit. IPod: When you select the iPod as a source, this unit resumes the music that you were listening to last time. If you set the track/file number which is not exist, the first track/file is played back automatically. If you set a file number that does not exist, the first file is played back automatically. By selecting “– –”, the FM station you set last time is set. When the timer is on, the TIMER indicator lights up on the front panel display (☞ P. 12 En USING USEFUL FUNCTIONS Using timer and sleep timer ■ Using the timer The timer sets the unit to play back music at the time you set. The unit is set to standby mode after the specified running time elapses. To use the timer, set the appropriate input source securely and set the timer in the setup menu in advance (☞ P. [. . . ] In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to provide free of charge service and the product may be returned at the customer’s expense. The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or Switzerland. The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha. Periodic maintenance and repair or replacement of parts due to normal wear and tear. [. . . ]