Detailed instructions for use are in the User's Guide.
[. . . ] 141 Quick Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 File Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Supplementary Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
File/Folder selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Playing back a SMF (Standard MIDI file) from USB flash memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This setting is applied to the ARP [ON/OFF] button on the panel.
Settings: off, on
SyncQtzValue (Sync Quantize Value)
Determines the actual timing at which the next Arpeggio playback starts when you trigger it while the Arpeggio of a certain Part is played back. When set to "off, " the next Arpeggio starts as soon as you trigger it. The number shown at right of each value indicates the resolution of the 1/4 note in clocks.
Settings: off, 2 60 (32nd note), 63 80 (16th note triplet), 6 120 (16th note), 83 160 (8th note triplet), 8 240 (8th note), 43 320 (1/4
note triplet), 4 480 (1/4 note)
MOX6/MOX8 Reference Manual
82
VOICE
PERF
SONG
PATTERN
MIX
MASTER
REMOTE
UTILITY
QUICK SET
FILE
QtzStrength (Quantize Strength)
Determines the offset value for "QtzStrength" in the [F5] PLAY FX display. This parameter is applied to all parts.
Settings: -100 +0 +100
Song Mode
Song Play [F1] PLAY [F2] GROOVE [F3] TRACK [F6] CHAIN Song Record Song Record Standby [F1] SETUP [F2] VOICE [F3] ARP ED [F5] CLICK [F6] ALL TR During Song Recording
VelocityRate
Determines the offset value for "VelocityRate" in the [F5] PLAY FX display. This parameter is applied to all parts.
Settings: -100 +0 +100
GateTimeRate
Knob
Determines the offset value for "QtzTimeRate" in the [F5] PLAY FX display. This parameter is applied to all parts.
Settings: -100 +0 +100
Swing
Determines the offset value for "Swing" in the [F5] PLAY FX display. This parameter is applied to all parts.
Settings: -120 +0 +120
[F2] TYPE
These are the same as in the Arpeggio Edit display (page 27) of the Voice mode.
[F1] SETUP [F3] REST [F4] TIE [F5] DELETE
[F3] MAIN
These are the same as in the Arpeggio Edit display (page 27) of the Voice mode. Please note that the "Tempo" parameter is not in the MAIN display of the Song mode. The tempo setting for arpeggio is same as the tempo setting in the Song Play display.
[F6] BAK DEL Arpeggio Edit [F1] COMMON [F2] TYPE [F3] MAIN
VoiceWithARP (Voice with Arpeggio)
Each Arpeggio type is assigned a specific Voice best suited to the type. This parameter determines whether or not the appropriate Voice registered to each Arpeggio type is assigned to the edited Part. When set to "on, " the appropriate Voice is assigned to the edited Part in place of the currently assigned Voice. Note that once the NRPN has been set for a channel, subsequent data entry will be recognized as the same NRPN's value change. When performing a control operation, you should transmit an RPN Null message (7FH, 7FH) after using these messages to prevent operational errors.
[F6] OUT CH Song Edit [F1] CHANGE [F2] VIEW FLT [F4] TR SEL [F5] INSERT [F6] DELETE Song Job [F1] UNDO/REDO [F2] NOTE [F3] EVENT
NOTE The MOX6/MOX8 cannot receive NRPN messages.
Exclusive (System Exclusive)
A type of MIDI message used to exchange data unique to a specific model or type of device. Unlike other MIDI events, these events differ depending on the manufacturer/device, and are incompatible among different devices.
DATA (HEX)
See the System Exclusive message in the "MIDI" section of the "Synthesizer Parameter Manual" PDF document.
Settings: 00 7F, F7 (Data must be entered in hexadecimal format. )
[F6] DELETE
Press this to actually delete the note events at the current cursor position.
[F4] MEAS [F5] TRACK [F6] SONG Supplementary Information
MOX6/MOX8 Reference Manual
86
VOICE
PERF
SONG
PATTERN
MIX
MASTER
REMOTE
UTILITY
QUICK SET
FILE
Song Job
The Song Job mode contains a comprehensive set of editing tools and data transform functions you can use to change the sound of the Song. It also includes a variety of convenient operations, such as copying or erasing data. See the Owner's Manual for instructions.
Song Mode
Song Play [F1] PLAY [F2] GROOVE [F3] TRACK [F6] CHAIN Song Record Song Record Standby [F1] SETUP [F2] VOICE
NOTICE
An "Executing. . . " message is shown when it takes a short amount of time to execute the Job. Never attempt to turn off the power while an "Executing. . . " message is shown. Turning the power off in this state results in loss of all user data.
Operation
[SONG] Song selection [JOB]
[F1] UNDO/REDO
The Undo Job cancels the changes you made in your most recent recording session, editing session, or Job, and restores the data to its previous state. Redo is available only after using Undo, and lets you restore the changes you made before undoing them.
[F3] ARP ED [F5] CLICK [F6] ALL TR During Song Recording [F1] SETUP [F3] REST [F4] TIE [F5] DELETE
NOTICE
Undo/Redo does not work with Mixing Voice operations.
[F2] NOTE (Note data Job)
Pressing this calls up the selected Job display. NOTE Before executing the Note data Job, make sure that you specify the Track (01 16, all) and range (measure : beat : clock) to
which the Job is applied.
[F6] BAK DEL Arpeggio Edit [F1] COMMON [F2] TYPE [F3] MAIN
01: Quantize
Quantization is the process of adjusting the timing of note events by moving them closer to the nearest exact beat. You can use this feature, for example, to improve the timing of a performance recorded in real time.
[F4] LIMIT [F5] PLAY FX [F6] OUT CH Song Edit
TR (Track) 001 : 1 : 000 999 : 4 : 479
Determines the Track (01 16, all) and range of measures/beats/clocks over which the Job is applied.
[F1] CHANGE [F2] VIEW FLT [F4] TR SEL [F5] INSERT [F6] DELETE Song Job [F1] UNDO/REDO [F2] NOTE [F3] EVENT [F4] MEAS [F5] TRACK [F6] SONG Supplementary Information
Quantize (Resolution)
Determines to what beats the note data in the specified Track will be aligned.
Settings: 32nd note, 16th note triplet, 16th note, 8th note triplet, 8th note, 1/4 note triplet, 1/4 note, 16th note + 16th note triplet, 8th note
+ 8th note triplet
Strength
This parameter sets the "strength" by which note events are pulled toward the nearest quantize beats. A setting of 0% results in no quantization.
Settings: 000% 100%
SwingRate
Delays notes on even-numbered beats (backbeats) to produce a swing feel. [. . . ] In addition, selecting this file type lets you load a Standard MIDI file (format 0, 1) to a specific Section of a Pattern.
File Mode
[F1] CONFIG [F2] SAVE [F3] LOAD [F4] RENAME [F5] DELETE Supplementary Information
* Assigned to the file which can be loaded.
NOTE This instrument is not compatible with the MOTIF XS6/7/8, MOTIF XF6/7/8, and MO6/MO8.
[SF1] EXEC (Execute)
Loads the selected file. NOTE To enter the selected directory, press the [ENTER] button.
[F4] RENAME
Select the desired file type. Select the file/folder to be renamed.
Rename the selected file/folder here.
Rename the selected file/directory here. You can rename files using up to eight alphabetic and numeric characters. [. . . ]