User manual YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2. We hope that this YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 user guide will be useful to you.


YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 : Download the complete user guide (783 Ko)

You may also download the following manuals related to this product:

   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (878 ko)
   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (878 ko)
   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (878 ko)
   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (878 ko)
   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (265 ko)
   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (741 ko)
   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (1 ko)
   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (878 ko)
   YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 (778 ko)

Manual abstract: user guide YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2

Detailed instructions for use are in the User's Guide.

[. . . ] This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Failure to follow instructions could void your FCC authorization to use this product in the USA. [. . . ] If the sound is distorted when the switch is set to the HIGH position, change the setting to LOW. If you feel output is low when the switch is set to the LOW position, change the setting to HIGH. · When using patches with stereo output, we recommend connecting the MAGICSTOMP's output jacks to a stereo device. · When connecting to a monaural device, use the OUTPUT L/MONO jack. · When connecting the power adaptor to the MAGICSTOMP's AC IN jack, you can wrap the power adaptor cord around the cord hook as shown in the illustration below (this helps keeping the plug from being accidentally pulled out). CAUTION · Don't let the cord bend sharply or kink when wrapping the cord around the hook. An excessive bend can cut the cord or start a fire. AC IN jack Cord hook Power adaptor cord 10 Connections Using the MAGICSTOMP with a guitar or other instrument Connecting to a guitar amplifier (monaural) INPUT Connecting to guitar amplifiers (stereo) INPUT INPUT Connecting to a recording device, etc. INPUT INPUT L/MONO L/MONO R L/MONO R OUTPUT L/MONO R AC IN INPUT Guitar, or other instrument * The AC adaptor's shape will vary according to the country to which the device is shipped. Power Adaptor Electric Outlet U99¤MAGICSTOMP óGAINfiMSTRáTONE MAGICSTOMP Using the MAGICSTOMP in an effect loop Power Adaptor Electric Outlet * The AC adaptor's shape will vary according to the country to which the device is shipped. OUTPUT L/MONO AC IN R INPUT EFFECT SEND EFFECT RETURN L R U99¤MAGICSTOMP óGAINfiMSTRáTONE MAGICSTOMP Mixer, etc. 11 Using the MAGICSTOMP The MAGICSTOMP comes loaded with a variety of effect patches (programmed effects). First, give some of the presets a try and see what's available. Turn on the amplifier and play You'll hear the currently selected patch. Use the MAGICSTOMP's VOLUME knob to adjust the MAGICSTOMP's output volume. Patch No. Patch Name U99¤MAGICSTOMP0 óGAINfiMSTRáTONE Try out some of the other patches The MAGICSTOMP has a total of 198 patches. 99 of those are User Patches (U01 ­ U99) to which you can save (overwrite) data of patches that you have created. The other 99 are Preset Patches (P01 ­ P99) which can not be overwritten with new data. You can however, edit the Preset Patches and save them in the User Patch section. * When shipped from the factory, the MAGICSTOMP's User Patch section contains the same data as found in the Preset Patches. Two ways to select patches When the MAGICSTOMP is shipped from the factory, its [UP/DOWN MODE] is already set for the patch selection mode. In this mode, just press the + switch to move to the next greater patch number, and press the ­ switch to move to the next lesser patch number. Hold either switch down and the patch numbers will quickly cycle up or down in order. In this mode, the ON/OFF switch is used to switch the patch (effect) on or off. Pressing the ­ switch decreases the patch number by 1 U01 U98 U99 P01 P97 P98 P99 U01¤DIST óBAL0fiSTERáVOL Pressing the + switch increases the patch number by 1 P99 P02 P01 U99 U04 U03 U02 Effect ON Effect OFF U01¤DIST óGAINfiMSTRáTONE U01¤DIST ó EFFECT OFF 12 Using the MAGICSTOMP The other way to select patches is with the [Performance Mode]. In this mode, the ­, +, and ON/OFF switches are used to turn three adjacent patches ON and OFF. q To enter the Performance Mode, press and hold any two switches (from ­, +, and ON/OFF). "PERFORMANCE MODE" appears in the display to inform you that the MAGICSTOMP is now in the Performance Mode. w Press and hold the ­ or + switch to change the patch set. ­ switch: U01/02/03P97/98/99P94/95/96. . . + switch: U01/02/03U04/05/06U07/08/09. . . * Patch sets (three adjacent patches make a patch set) have been predetermined. * When the MAGICSTOMP switches to the Performance Mode, the patch set containing the patch number selected with the Up/Down Mode is selected. e To return to the UP/DOWN Mode, press and hold any two switches (from ­, +, and ON/OFF). "UP/DOWN MODE" appears in the display to inform you that the MAGICSTOMP is now in the Up/Down Mode. Example) Switching from the Up/Down Mode (patch U06 is selected) to the Performance Mode. When in the Performance Mode, the lamp of the currently selected patch lights (U05 is selected in the illustration below). Patch U04 ON/OFF switch Patch U06 ON/OFF switch U06¤AG0TUBE100 óBALVfiSTERáVOL Up/Down Mode Press and hold any two of the three switches Press and hold the ­ switch. U01/02/03 P97/98/99 P94/95/96 P91/92/93 : : Patch U05 ON/OFF switch Press and hold the + switch. U07/08/09 U10/11/12 U13/14/15 U16/17/18 : : U06¤AG0TUBE100 PERFORMANCE0MODE U06¤AG0TUBE100 >ãBAL0ÄSTERÄVOL Performance Mode When all three patches are switched OFF, the display appears as follows (all lamps are off). U05¤AG0DYNAMIC2 >0OFF0(U04:05:06) 13 Create your own sound Use the knobs to adjust the effect The three knobs located below the display let you adjust different characteristics of the effect. [. . . ] Is the volume control on the instrument connected to the INPUT jack turned up? Is the effect's output level set to "0"? · Sound level is low Switch the input level to the "HIGH" position. ( P. 10) · Effect is not active Is the effect's output level set to "0"? Is the effect switched OFF (all lamps are off)? · Can not change to another patch Check the display. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA MAGICSTOMP GUITAR EFFECTS PROCESSOR MK2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.