User manual YAMAHA FJR1300AS

[. . . ] Read this manual carefully before operating this vehicle. OWNER'S MANUAL FJR1300AS 2D2-28199-E3 EAU26945 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. YAMAHA MOTOR ELECTRONICS CO. , LTD. 1450-6, Mori, Mori-machi, Shuchi-gun, Shizuoka-ken, 437-0292 Japan DECLARATION of CONFORMITY We Company: YAMAHA MOTOR ELECTRONICS CO. , LTD. Address: 1450-6, Mori, Mori-Machi, Shuchi-gun, Shizuoka-Ken, 437-0292 Japan Hereby declare that the product: Kind of equipment: IMMOBILIZER Type-designation: 5SL-00 is in compliance with following norm(s) or documents: R&TTE Directive(1999/5/EC) EN300 330-2 v1. 1. 1(2001-6), EN60950-1(2001) Two or Three-Wheel Motor Vehicles Directive(97/24/EC: Chapter 8, EMC) Place of issue: Shizuoka, Japan Date of issue: 1 Aug. 1 Version up the norm of EN60950 to EN60950-1 2 To change company name 3 Date 9 Jun. [. . . ] 5. "LO" position "OFF" position " " mark Grip warmer adjusting knob "HI" position WARNING The vehicle must not be ridden with the sidestand down, or if the sidestand cannot be properly moved up (or does not stay up), otherwise the sidestand could contact the ground and distract the operator, resulting in a possible loss of control. Yamaha's ignition circuit cut-off system has been designed to assist the operator in fulfilling the responsibility of raising the sidestand before starting off. Therefore, check this system regularly as described 3-33 The grip warmer adjusting knob can be set between the "LO" and "HI" positions. Align the " " mark on the knob with "OFF" to turn the grip warmers off. TIP When the vehicle is stopped or traveling at extremely low speeds (e. g. , in traffic jams), the grip warmer temperature is lower than when traveling at higher speeds. INSTRUMENT AND CONTROL FUNCTIONS EAU40524 Ignition circuit cut-off system The ignition circuit cut-off system (comprising the sidestand switch and brake light switches) has the following functions. G It prevents starting when the sidestand is up, but neither brake is applied. G It prevents starting when either brake is applied, but the sidestand is still down. Periodically check the operation of the ignition circuit cut-off system according to the following procedure. 3 3-34 INSTRUMENT AND CONTROL FUNCTIONS With the engine turned off: 1. Does the engine start? WARNING ". · The vehicle must be placed on the center· If a malfunction is noted, have a Yamaha dealer check the system before riding. 3 The neutral, the brake switch or the YCC-S system may not be working correctly. The vehicle should not be ridden until checked by a Yamaha dealer. stand during this inspection. YES With the engine still running: 7. Does the engine stall? NO YES After the engine has stalled: 11. Does the engine start? NO The sidestand switch may not be working correctly. The vehicle should not be ridden until checked by a Yamaha dealer. NO YES A brake switch may not be working correctly. The vehicle should not be ridden until checked by a Yamaha dealer. The system is OK. The vehicle can be ridden. 3-35 INSTRUMENT AND CONTROL FUNCTIONS EAU39652 Auxiliary DC jack ECA15430 NOTICE The accessory connected to the auxiliary DC jack should not be used with the engine turned off, and the load must never exceed 30 W (2. 5 A), otherwise the battery may discharge. EWA14360 3 1. Auxiliary DC jack cap WARNING To prevent electrical shock or shortcircuiting, make sure that the cap is installed when the auxiliary DC jack is not being used. This vehicle is equipped with an auxiliary DC jack in the accessory box. A 12-V accessory connected to the auxiliary jack can be used when the key is in the "ON" position and should only be used when the engine is running. (See page 5-1. ) 3-36 FOR YOUR SAFETY ­ PRE-OPERATION CHECKS EAU15596 Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the Owner's Manual. EWA11151 WARNING Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. Before using this vehicle, check the following points: ITEM Fuel · Check fuel level in fuel tank. [. . . ] Cover the muffler outlets with plastic bags to prevent moisture from entering them. Do not store the battery in an excessively cold or warm place [less than 0 °C (30 °F) or more than 30 °C (90 °F)]. TIP Make any necessary repairs before storing the motorcycle. 7-4 SPECIFICATIONS Dimensions: Overall length: 2230 mm (87. 8 in) Overall width: 750 mm (29. 5 in) Overall height: 1450 mm (57. 1 in) Seat height: 805 mm (31. 7 in) Wheelbase: 1545 mm (60. 8 in) Ground clearance: 130 mm (5. 12 in) Minimum turning radius: 3100 mm (122. 0 in) Engine oil: Type: SAE 10W-40, SAE 10W-50, SAE 15W-40, SAE 20W-40 or SAE 20W-50 Recommended engine oil grade: API service SG type or higher, JASO standard MA Engine oil quantity: Without oil filter cartridge replacement: 3. 80 L (4. 02 US qt, 3. 34 Imp. qt) With oil filter cartridge replacement: 4. 00 L (4. 23 US qt, 3. 52 Imp. qt) Fuel injection: Throttle body: Type/quantity: 42EHS/1 Spark plug (s): Manufacturer/model: NGK/CR8E Manufacturer/model: DENSO/U24ESR-N Spark plug gap: 0. 7­0. 8 mm (0. 028­0. 031 in) Clutch: Clutch type: Wet, multiple-disc Final gear oil: Type: Shaft drive gear oil Quantity: 0. 20 L (0. 21 US qt, 0. 18 Imp. qt) Weight: With oil and fuel: 295. 0 kg (650 lb) Transmission: Primary reduction system: Spur gear Primary reduction ratio: 75/48 (1. 563) Secondary reduction system: Shaft drive Secondary reduction ratio: 35/37 × 21/27 × 33/9 (2. 698) Transmission type: Constant mesh 5-speed Operation: Left foot and left hand Gear ratio: 1st: 43/17 (2. 529) 2nd: 39/22 (1. 773) 3rd: 31/23 (1. 348) Cooling system: Coolant reservoir capacity (up to the maximum level mark): 0. 25 L (0. 26 US qt, 0. 22 Imp. qt) Radiator capacity (including all routes): 2. 60 L (2. 75 US qt, 2. 29 Imp. qt) Engine: Engine type: Liquid cooled 4-stroke, DOHC Cylinder arrangement: Forward-inclined parallel 4-cylinder Displacement: 1298. 0 cm³ Bore × stroke: 79. 0 × 66. 2 mm (3. 11 × 2. 61 in) Compression ratio: 10. 80 :1 Starting system: Electric starter Lubrication system: Wet sump Air filter: Air filter element: Dry element 8 Fuel: Recommended fuel: Regular unleaded gasoline only Fuel tank capacity: 25. 0 L (6. 61 US gal, 5. 50 Imp. gal) Fuel reserve amount: 5. 5 L (1. 45 US gal, 1. 21 Imp. gal) 8-1 SPECIFICATIONS 4th: 28/26 (1. 077) 5th: 26/28 (0. 929) Tire air pressure (measured on cold tires): Loading condition: 0­90 kg (0­198 lb) Front: 270 kPa (2. 70 kgf/cm², 39 psi) Rear: 290 kPa (2. 90 kgf/cm², 42 psi) Loading condition: 90­208 kg (198­459 lb) Front: 270 kPa (2. 70 kgf/cm², 39 psi) Rear: 290 kPa (2. 90 kgf/cm², 42 psi) High-speed riding: Front: 270 kPa (2. 70 kgf/cm², 39 psi) Rear: 290 kPa (2. 90 kgf/cm², 42 psi) Recommended fluid: DOT 4 Rear brake: Type: Single disc brake Operation: Right foot operation Recommended fluid: DOT 4 Chassis: Frame type: Diamond Caster angle: 26. 00 ° Trail: 109. 0 mm (4. 29 in) Front suspension: Type: Telescopic fork Spring/shock absorber type: Coil spring/oil damper Wheel travel: 135. 0 mm (5. 31 in) Front tire: Type: Tubeless Size: 120/70 ZR17M/C (58W) Manufacturer/model: METZELER/Roadtec Z6G Manufacturer/model: BRIDGESTONE/BT021F F Rear suspension: Type: Swingarm (link suspension) Spring/shock absorber type: Coil spring/gas-oil damper Wheel travel: 125. 0 mm (4. 92 in) Front wheel: Wheel type: Cast wheel Rim size: 17M/C x MT3. 50 Rear tire: Type: Tubeless Size: 180/55 ZR17M/C (73W) Manufacturer/model: METZELER/Roadtec Z6C Manufacturer/model: BRIDGESTONE/BT021R F 8 Electrical system: Ignition system: TCI (digital) Charging system: AC magneto Rear wheel: Wheel type: Cast wheel Rim size: 17M/C x MT5. 50 Battery: Model: GT14B-4 Voltage, capacity: 12 V, 12. 0 Ah Loading: Maximum load: 208 kg (459 lb) (Total weight of rider, passenger, cargo and accessories) Front brake: Type: Dual disc brake Operation: Right hand operation 8-2 SPECIFICATIONS Headlight: Bulb type: Halogen bulb Fuses: Main fuse: 50. 0 A Headlight fuse: 25. 0 A Signaling system fuse: 15. 0 A Ignition fuse: 10. 0 A Radiator fan fuse: 15. 0 A × 2 Hazard fuse: 10. 0 A Fuel injection system fuse: 15. 0 A ABS control unit fuse: 10. 0 A ABS motor fuse: 30. 0 A ABS solenoid fuse: 20. 0 A Auxiliary DC jack fuse: 3. 0 A YCC-S motor control fuse: 30. 0 A Backup fuse: 10. 0 A Bulb voltage, wattage × quantity: Headlight: 12 V, 60 W/55 W × 2 Tail/brake light: 12 V, 5. 0 W/21. 0 W × 2 Front turn signal light: 12 V, 21. 0 W × 2 Rear turn signal light: 12 V, 21. 0 W × 2 Auxiliary light: 12 V, 5. 0 W × 2 License plate light: 12 V, 5. 0 W × 1 Meter lighting: LED Neutral indicator light: LED High beam indicator light: LED Oil level warning light: LED Turn signal indicator light: LED Engine trouble warning light: LED ABS warning light: LED Immobilizer system indicator light: LED 8 8-3 CONSUMER INFORMATION EAU26351 EAU26381 EAU26400 Identification numbers Record the key identification number, vehicle identification number and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. KEY IDENTIFICATION NUMBER: Key identification number Vehicle identification number 1. [. . . ]