User manual YAMAHA F02

[. . . ] F02 Owner’s Manual IMPORTANT — Check your power supply — Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the rear panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] To turn the variation on or off for the right-hand split Voice, press [VARIATION] or the currently selected Voice button. [VARIATION] in Split Mode Normally, the Voice indicator of the right Voice lights in Split mode. [VARIATION] can be used to turn the variation for the right Voice on or off as required. While [SPLIT] is held, however, the Voice indicator of the left Voice lights. In this state [VARIATION] turns the variation for the left Voice on or off. (The indicator of the Left Voice button will light while [SPLIT] is pressed. ) To turn the variation on or off for the left-hand split Voice, hold [SPLIT] and press [VARIATION] or the currently selected Voice button. You can make the following settings for right-and left-hand split Voice in Split: [REVERB] in Split Mode An optimum reverb type for the split Voices is assigned automatically. Shifting the Octave for each Voice (Octave Shift): You can shift the pitch up and down in octave steps for the right-hand split Voice and the left-hand split Voice independently. ) Adjusting the Balance between two Voices: While holding down [VARIATION], press one of the F♯0 - F♯1 keys. ) Settings below “0” increase the volume of the left-hand split Voice while settings above “0” increase the volume of the right-hand split Voice, in relation to the other. Damper Pedal Range The Damper Pedal Range function determines whether the damper pedal affects the right Voice, the left Voice, or both the left and right Voices in Split mode. While holding down [METRONOME], press one of the G4, G♯4, or A4 keys. ) Setting range: ALL (for both Voices) 1 (for the right Voice) 2 (for the left Voice) Default setting: 1 (for the right Voice) 5. Playing Various Musical Instrument Sounds (Voices) F02 Owner’s Manual Playing Back Songs (BGM) The BGM (background music) functions on this instrument lets you play back Songs contained in internal memory or USB memory connected to the [USB TO DEVICE] terminal. NOTE About MIDI Songs and Audio Songs A MIDI Song is comprised of your keyboard performance information and is not a recording of the actual sound itself. The performance information refers to which keys are played, at what timing, and at what strength — just as in a musical score. Based on the recorded performance information, the tone generator of the instrument outputs the corresponding sound. A MIDI Song uses a small amount of data capacity in comparison to an audio Song, and allows you to easily change the event like a Voice. This data is recorded in the same way as that used in recording cassette tapes, or with voice recorders, etc. For a general overview of MIDI and how you can effectively use it, refer to “MIDI Basics” (downloadable from the Yamaha website). Songs Compatible with this Instrument BGM lamp PRESET 1 Song number 001 – 030 Descriptions Piano Preset Songs (Classic) Piano Preset Songs (Classic) in the instrument. [. . . ] CAUTION When you move the assembled instrument, be sure to grasp the handles and the bottom of the keyboard. Improper handling can result in damage to the instrument or personal injury. Insert the AC power cord plug into the AC IN connector on the rear of A. For models that feature a voltage selector: Set the voltage selector to an appropriate voltage. [. . . ]