User manual YAMAHA EXI8/EXO8

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA EXI8/EXO8. We hope that this YAMAHA EXI8/EXO8 user guide will be useful to you.


YAMAHA EXI8/EXO8 : Download the complete user guide (1943 Ko)

You may also download the following manuals related to this product:

   YAMAHA EXI8/EXO8 (2166 ko)
   YAMAHA EXI8/EXO8 (4227 ko)
   YAMAHA EXI8/EXO8 (4236 ko)
   YAMAHA EXI8/EXO8 (4238 ko)
   YAMAHA EXI8/EXO8 (4995 ko)
   YAMAHA EXI8/EXO8 (2166 ko)
   YAMAHA EXI8/EXO8 (4375 ko)
   YAMAHA EXI8/EXO8 ANNEXE 1 (4906 ko)
   YAMAHA EXI8/EXO8 ANNEXE 1 (4916 ko)
   YAMAHA EXI8/EXO8 ANNEXE 1 (4879 ko)
   YAMAHA EXI8/EXO8 ANNEXE 1 (5647 ko)
   YAMAHA EXI8/EXO8 ANNEXE 1 (2988 ko)
   YAMAHA EXI8/EXO8 ANNEXE 1 (5057 ko)
   YAMAHA EXI8/EXO8 ANNEXE 1 (5057 ko)
   YAMAHA EXI8/EXO8 ANNEXE 1 (2578 ko)

Manual abstract: user guide YAMAHA EXI8/EXO8

Detailed instructions for use are in the User's Guide.

[. . . ] ователя 取扱説明書 EN DE FR ES IT RU ZH JA 日本語 中文 Русский Italiano Español Français Deutsch English Explanation of Graphical Symbols CAUT I ON RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] R [ALERT] indicator When a problem or abnormality occurs in the unit, this indicator will flash in red and at the same time the [INPUT SIGNAL] or [OUTPUT SIGNAL] indicator that corresponds to the alert number will flash in green. For explanations of the alerts, refer to the “Alert list” on page 13. Alert number Example: When a problem related to alert number “3” occurs t [POWER] indicator This indicator will light when this device is powered-on. Y [NETWORK] indicator This indicator will light green if a link is established with an external device via the rear panel NETWORK connector (page 9). eXi8/EXo8 Owner’s Manual 7 Controls and Connectors Rear Panel i q w e ON r t y u * Illustration shows EXi8. NOTE The EXi8/EXo8 has some connectors that are shaped identically but have a completely different function (e. Make the appropriate connections as instructed by the explanation for each connector. R DIP switches These switches enable you to specify the settings related to the startup operation of the EXi8/EXo8. Q Ground screw The supplied power cord has a three-prong plug that will ground the device when plugged into an appropriately grounded three-prong type AC mains outlet. In some cases, you may be able to reduce hum or interference by also connecting this screw to ground. W AC IN connector Use the included power cord to supply power to this connector. First, connect the power cord to this device, and then insert the power cord plug into the AC outlet. ρ Switches 1–2 (UNIT ID) These switches specify the upper digit and the abovementioned [UNIT ID] rotary switch specifies the lower digit, together allowing you to specify one of 63 different UNIT ID numbers in a range from 01 to 3F. Switch position Option UNIT ID is “0x” UNIT ID is “1x” UNIT ID is “2x” UNIT ID is “3x” Functions The [UNIT ID] rotary switch will have a setting range of 01 through 0F. The [UNIT ID] rotary switch will have a setting range of 10 through 1F. The [UNIT ID] rotary switch will have a setting range of 20 through 2F. The [UNIT ID] rotary switch will have a setting range of 30 through 3F. E [UNIT ID] rotary switch This switch specifies the ID by which EXi8/EXo8 units are individually distinguished in the MTX system network. You must specify the ID avoiding duplicates among the MTX series, XMV series and the EXi8/EXo8 within the same network. DIP switches 1 and 2 described in r specify the upper digit, and this rotary switch specifies the lower digit, together allowing you to set the UNIT ID to one of 63 possibilities in the range of 01 to 3F. NOTE • Do not use a UNIT ID of “00” (DIP switches 1 and 2 upward and the rotary switch at 0). € You’ll need to restart the device after changing the setting of the [UNIT ID] rotary switch. [. . . ] ([INPUT SIGNAL] indicator does not light) Make sure that a signal from an external device is being input. Set the gain of the internal head amplifier or external head amplifier to an appropriate level. ([OUTPUT SIGNAL] indicator does not light) In the system’s dedicated application software, could the channel’s ON button be turned off?Have settings such as patch, gain or level in the system’s dedicated application software been made correctly? [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA EXI8/EXO8




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA EXI8/EXO8 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.