User manual YAMAHA ELB-01

[. . . ] ELB-01 Owner's Manual EN PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord Only use the voltage specified as correct for the instrument. Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. Water warning Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. [. . . ] All Registrations in Registration Memory can also be saved to USB flash memory. Reference Pages Selecting a Voice (page 25) Selecting a Rhythm (page 56) Voice Controls and Effects (page 40) 1 Create your original Registration by making all desired panel settings. ELB-01 Owner's Manual 97 Registration Memory Various types of basic Registrations have been programmed to the numbered Registration Memory buttons [1] [8], with additional Registration Memory presets 9 16 which can also be called up easily. You can of course record your own Registration settings to a numbered button, but keep in mind that the preset Registration for that button will be overwritten and erased. You can recall the original factory preset settings (and delete your own) by initializing the Registration Memory. 5 2 While holding down the [M. ] (Memory) button in the Registration Memory section, press the numbered button to which you wish to save your Registration. 1. Press desired numbered button. When the Registration is stored, the LED above the numbered the numbered button flashes momentarily. 5 Registration Memory Reference Page Saving Registrations as Registration Data (File); (page 124) Although the ELB-01 has just eight Registration Memory buttons, up to sixteen Registrations can be stored. To store Registrations 9 16, simultaneously hold down both the [VOICE DISPLAY] button in the Display Select section and the [M. ] (Memory) button in the Registration Memory, and press the desired numbered button (in this case, indicated as [1] [8]) to which you wish to save your Registration. When the Registration is stored, the numbered button's LED flashes momentarily Do not turn the power off while the Registration is being saved. Functions and settings that cannot be memorized: Pitch (page 150) MIDI Control settings (page 161) LCD related settings (page 19) The following settings are common to all Registration Memory numbers 1 16 and cannot be stored individually for each number. Transpose (page 150) Registration Shift (page 102) Auto Fill setting (page 60) Reverb type (page 48) User rhythms (page 64) User Keyboard Percussion (page 92) Rhythm Sequences (page 75) Disable setting (page 99) 98 ELB-01 Owner's Manual 2 Selecting Registrations Simply press the numbered button ([1] [8]) that corresponds to the Registration you wish to select. (The selected button's LED lights. ) To call up one of the Registrations 9 16, simultaneously hold down the [VOICE DISPLAY] button in the Display Select section and press the appropriate numbered button. (For Registrations 9 16, the LEDs do not light. ) Example: Calling up Registration Number 11 Corresponding Registration Memory Number 9 10 11 12 13 14 15 16 5 You can also recall Registrations in a pre-programmed order by using the right footswitch. This function is called "Registration Shift" (page 102). Registration Memory While holding down the [VOICE DISPLAY] button, press the desired numbered button. Using the [D. ] (Disable) button: Keep in mind that rhythm and automatic accompaniment patterns also change when you select different Registration Memory buttons. There may be times during your performance when you want to keep the same rhythm going, even when you make Registration Memory changes. Pressing the [D. ] (Disable) button allows you to keep the same rhythm, accompaniment patterns, tempo, and so on throughout all your Registration changes, or make your own rhythm selections if you want to. When the [D. ] button is on, the following functions will not change, even when you change the Registration Memory number. [D. ] (Disable) button Rhythm menu, Rhythm section, Rhythm tempo, Rhythm volume, Rhythm reverb Accompaniment volume, Accompaniment reverb, On/Off status of Accompaniment parts A. B. C. mode ELB-01 Owner's Manual 99 3 Initializing Registration Memory If you want to restore the original factory-programmed Registration Memory presets, you can initialize the Electone settings. Keep in mind that this deletes any of your custom Registration Memory and LCD Display settings. Always save your important data to external media, such as USB flash memory. When turning the power on after initializing the Electone, the preset settings will be recalled and your own Registration setting(s) will be erased and replaced with the factory defaults. For details on how to initialize the Electone, refer to "Factory Set (Initializing the Electone)" on page 20. 4 Saving the Registration data to USB flash memory 5 Registration Memory Reference Page Songs (page 116) You can save your Registration Memory settings to an external storage device, such as USB flash memory, with sixteen Registrations stored to a single file. For details about using other external storage devices, see Chapter 6, Music Data Recorder (M. D. R. ). The instructions below explain how to save the Registration data to a USB flash memory. Reference Page USB TO DEVICE terminal (page 151) 1 2 Insert the USB flash memory into the USB TO DEVICE terminal. Press the [MDR] button. The MDR display appears. <SONG SELECT> 001:USB 01 / [] 100 ELB-01 Owner's Manual 3 Select the song to which you want to save the Registration data (page 124). USB 01 [~] / ___:new song 4 Press the PAGE buttons to select Page 9. The Registration Save Page is displayed. USB 01 [~] / ___:new song <REG. SAVE> [EXE] ___:new song :__ 5 Reference Pages Recalling Recorded Registrations (page 131) Changing the Song/Folder Name (page 122) <REG. SAVE> [EXE] ___:new song :__ <REG. SAVE> [EXE] 001:SONG 1 01 ELB-01 Owner's Manual 101 Registration Memory Press the [B] button corresponding to the [EXE] (Execute) in the display. [. . . ] 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 25/F. , United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Valle Cedex 2, France Tel: 01-64-61-4000 HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. [. . . ]