User manual YAMAHA DVD-S530

[. . . ] UCA DVD / VIDEO CD / CD PLAYER LECTEUR DE DVD DVD-S530 OWNER'S MANUAL MODE D'EMPLOI STANDBY /ON CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. [. . . ] ­ PCM Output Allows to select PCM digital output between 48kHz and 96kHz. When 48kHz has been selected, 96kHz (if available on disc) PCM data stream will be converted to 48kHz. If your PCM output selection is 96kHz, the digital output will be muted to comply with the standards. Select 48kHz to enable digital output. ­ Analog output Select Stereo, Dolby Surr-compat (Dolby Surround compatible) or 3D Sound (Trusurround) output to match your system's playback capability. ­ Night Mode When set to On, the dynamics of your sound output are optimized. High volume outputs are softened, enabling you to watch your favorite action movie, etc. without disturbing others. 10 Preparation Language Selecting disc languages: Menu/Audio/Subtitle language This is to select the audio language, subtitle language and the language used in video monitor menus or DVD menus which will always be used for every disc to be played back. If the language selected is not available on the disc, the original language designated by each disc will be selected. ­ Help text When set to On, help text describes the icons selected. ­ Smart Power-off ­ PBC (Playback Control - for VCD) The Playback Control can be set to On or Off. English Features ­ Access control Access control contains the following features: Child Lock - When Child Lock is set to on, a 4digit code needs to be entered in order to play discs. Parental level - Allows the conditional presentation of DVDs containing Parental Control information (see page 19 and 20, `Access Control' section). ­ Status window Displays the current status of this unit and appears with the menu bar. When disc playback is stopped, it is displayed with the `Temporary Feedback Field' in the default screen. Select Off to suppress display of the Status window. Puts this unit to standby after a predefined time. This can be set to Enabled or Disabled. 11 Operation Basic Playback 1 2 3 4 Press STANDBY/ON on the front panel. READING appears on the front display, and playback starts automatically. Playing a DVD-Video DVD video discs may have one or more TITLES, and each TITLE may have one or more CHAPTERS. Playback stops at the end of each TITLE. DVD-VIDEO DISC TITLE 1 CHAPTER 1 CHAPTER 2 CHAPTER 1 TITLE 2 CHAPTER 2 CHAPTER 3 Playing a title 1 POW ER ON/O FF Notes: ­ DVDs may have a region code. This unit will not play discs that have a region code different from the region code of this unit. ­ If `Child Lock' is set to ON and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see Access Control). 2 3 4 Insert a disc and close the tray, playback starts automatically. The Video monitor's and display shows the type of disc loaded, disc's information and playing time. When the disc menu appear on the video monitor, use 431 2 or numeric buttons on the remote control to select an option and continue playback. If the titles are numbered , press the numeric buttons or use 43 to select desired title in the menubar. To stop playback, press STOP. Resume In stop mode and when a disc has not been ejected, Pressing PLAY will automatically resume playback from the point where the playback was last stopped. [. . . ] If in doubt, please make sure the disc plays according to your parental control settings before you allow children access to this unit. 6 Press ENTER/OK or 1 to confirm, then press 1 again to exit the User Preference Settings menu. Country 1 2 3 4 5 6 When disc playback is stopped, select Access control in the User Preference Settings menu using 3/4. Press ENTER/OK or 1 to confirm, then press 1 again to exit the menu. 20 Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. English Problem No power No picture Distorted picture Solution ­ ­ ­ ­ ­ ­ Check if the AC power cord is properly connected. Check the disc for fingerprints and clean the disc with a soft cloth, wiping from the centre to the edge. [. . . ]