User manual YAMAHA DTX700

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA DTX700. We hope that this YAMAHA DTX700 user guide will be useful to you.


YAMAHA DTX700 : Download the complete user guide (4392 Ko)

You may also download the following manuals related to this product:

   YAMAHA DTX700 (27791 ko)
   YAMAHA DTX700 (26455 ko)
   YAMAHA DTX700 (2609 ko)
   YAMAHA DTX700 (6600 ko)
   YAMAHA DTX700 (28029 ko)
   YAMAHA DTX700 (27468 ko)
   YAMAHA DTX700 (26445 ko)
   YAMAHA DTX700 (5197 ko)
   YAMAHA DTX700 (27613 ko)
   YAMAHA DTX700 Ã (1322 ko)
   YAMAHA DTX700 DATA LIST (543 ko)
   YAMAHA DTX700 REFERENCE MANUAL (10754 ko)
   YAMAHA DTX700 REFERENCE MANUAL (10438 ko)
   YAMAHA DTX700 REFERENCE MANUAL (10729 ko)
   YAMAHA DTX700 REFERENCE MANUAL (10295 ko)
   YAMAHA DTX700 REFERENCE MANUAL (10450 ko)
   YAMAHA DTX700 REFERENCE MANUAL (10451 ko)
   YAMAHA DTX700 REFERENCE MANUAL (10321 ko)
   YAMAHA DTX700 REFERENCE MANUAL (10294 ko)
   YAMAHA DTX700 DATA LIST (543 ko)
   YAMAHA DTX700 REFERENCE MANUAL (924 ko)

Manual abstract: user guide YAMAHA DTX700

Detailed instructions for use are in the User's Guide.

[. . . ] DRUM TRIGGER MODULE DTX700 Owner's Manual (Setup / Basic Operation) Read on paper (see page 6 for Table of Contents) Read first Owner's Manual (Setup / Basic Operation) : This booklet Read when necessary Data List : Separate booklet Read on your computer (PDF file) Read when Reference Manual (Detailed Operation) necessary Please download from this web page: http://www. yamaha. co. jp/manual/ EN SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc. , is used, please observe all safety markings and instructions that accompany the accessory product. [. . . ] · Sustain: This function allows the amount of sustain to be adjusted. · Clutch: This function adjusts the height of the hi-hat clutch ­ or in other words, the height of the top hi-hat. This function allows the amount of decay to be adjusted. · Decay: 6 Turn the dial to adjust the sound. DTX700 Owner's Manual 31 Basic Operation Building Your Own Kit 7 When you have finished adjusting the sound, press the [STORE] button. Importing & Assigning Audio Files 1 Using a computer, place the audio files you wish to import on a USB memory device. NOTE · Be sure to place the audio files in the USB memory device's root directory (that is, not within any folder). · If the audio files you wish to use have been recorded with a different bit depth, please convert them to 16-bit in advance using, for example, the bundled DAW software. For details regarding the conversion method, please refer to the instruction manual that came with your software. · Your DTX700 can import audio files of up to approximately 23 seconds in length (in the case of 44. 1-kHz, 16bit audio). · Even when the above conditions have been satisfied, certain other factors may make audio files incompatible with the DTX700. If you do not wish to store your new setting, press the [EXIT] button. The display will return to the previous page. 8 Press the dial to store your new setting. 2 Unplug the USB memory device from your computer and plug it into the [USB TO DEVICE] port on the DTX700. NOTE · Even if you have adjusted a kit's sounds and stored your new settings, you can perform kit initialization (page 28) at any time to restore the original ones. USB memory device Playing with a Double Bass Drum As described below, you can easily configure your DTX700 to produce a kick drum sound when you operate the hi-hat controller (RHH135 or HH65) plugged into the [HI-HAT CONTROL] trigger input jack. This convenient function provides support for double bass drumming techniques. 3 Press the [KIT] button. 1 2 Press the [KIT] button and turn the dial to choose a kit. Press the [INST] button and then press down once on the pedal connected to the [oKICK/ !0] trigger input jack. The message "Kick" will be shown in the top right corner of the display. 4 Turn the dial to choose the kit you wish to edit. 3 Hold down the [SHIFT] button and press the [F2] (DBL BASS) button. 5 NOTE · While this function is enabled, you will be unable to use the hi-hat controller plugged into the [HI-HAT CONTROL] trigger input jack to simulate opening and closing of the hi-hat. Press the [INST] button. 32 DTX700 Owner's Manual Building Your Own Kit Basic Operation 6 Hit the pad that you wish to assign an audio file to. 10 Press the dial to start the importing process. NOTE · If the pad in question is a two- or three-zone type, the audio file will be assigned to all of its zones. 7 Press the [F3] button. NOTE · Whenever you import an audio file, your DTX700 will automatically store it. 8 Turn the dial to select the audio file you wish to import. 9 Press the [F3] button. To cancel the importing of an audio file, press the [EXIT] button. The display will return to the previous page. DTX700 Owner's Manual 33 Basic Operation Building Your Own Kit Naming an Original Kit 8 Turn the dial to move the cursor to the "Name" row of the displayed list. 1 Press the [KIT] button. 9 2 Turn the dial to choose a kit that you have built. Press the dial. Enter a new name for the selected kit. A name of up to 12 characters in length can be assigned to drum kits. Move the underline cursor to the character you wish to change using the [F1] and [F3] buttons, and then use either the dial or the [+/INC] and [-/DEC] buttons to change the character. 10 3 Press the [MENU] button. 4 Turn the dial to move the cursor to "Kit" . 11 When you have finished entering the name, press the [STORE] button. 5 6 Press the dial. Turn the dial to move the cursor to "Common" . If you do not wish to store your new kit name, press the [EXIT] button. The display will return to the previous page. 12 7 Press the dial to store your new kit name. Press the dial. 34 DTX700 Owner's Manual Building Your Own Kit Basic Operation Adjusting the Snare Wire With the DTX700, you can easily adjust the snare wire for the snare pad (i. e. , the pad plugged into the [qSNARE] trigger input jack). In the case of pads featuring a pad controller, simply turn the controller to adjust the snare wire setting. 5 Hold down the [SHIFT] button and press the [F2] button. Pad controller 6 Meanwhile, the following procedure can be used to adjust the setting for pads not featuring a pad controller. Turn the dial to adjust the snare wire. Higher values correspond to tighter snare wires and viceversa. An "off" setting implies that the snare wire has been fully removed from the snare. 1 Press the [KIT] button. 7 2 Turn the dial to choose a kit. Press the [STORE] button. 8 3 Press the [INST] button. Press the dial to store your new setting. 4 Hit the snare pad (i. e. , the pad plugged into the [qSNARE] trigger input jack). NOTE · The Snares function is displayed only for the pad connected via the [qSNARE] trigger input jack. DTX700 Owner's Manual 35 Basic Operation Playing with Songs for Practice Playing a Song Adjusting the Song Volume 1 Press the [SONG] button. 1 Press the [SONG] button. 2 Turn the dial to select the song you wish to play. 2 Press the [F1] button. 3 Press the [F3] button to start playing the song. 3 You can stop playback by pressing the [F3] button once again. Turn the dial to adjust the song's playback volume. 4 Press the [EXIT] button to return to the Song page, and then press the [F3] button to start the song. If the volume is not yet correct, repeat the above process. 36 DTX700 Owner's Manual Playing with Songs for Practice Basic Operation Adjusting the Volume of a Song's Drums Using the procedure described below, you can conveniently adjust the volume of a song's drum part while leaving the other parts unchanged. This function is very useful when you wish to play along with a song, keeping its drum part only slightly audible. 5 Turn the dial to adjust the volume. 1 Press the [SONG] button. 6 Press the [EXIT] button to return to the Song page, and then press the [F3] button to start the song. If the volume is not yet correct, repeat the above process. 2 Press the [F1] button. 3 Press the dial to switch to the outline cursor. 4 Turn the dial to move the cursor to the DRUM fader, and then press the dial. DTX700 Owner's Manual 37 Basic Operation Playing with Songs for Practice Muting the Drum Part Using the procedure described below, you can conveniently mute (i. e. , silence) a song's drum part while leaving the other parts unchanged. This function is very useful when you wish to drum along with a song. Soloing the Bass Part Using the procedure described below, you can conveniently solo a song's bass part (i. e. , silence all other parts). This function is very useful when you wish to practice with just the bass playing. 1 Press the [SONG] button. 1 Press the [SONG] button. 2 Press the [F2] button. The icon will be displayed on-screen as inverted text , indicating that the drums are now muted. You can unmute the drums and restore the icon to its original condition by pressing the [F2] button once again. 2 Press the [F1] button. 3 Press the [F2] button. All accompaniment parts other than the bass will be muted (i. e. , silenced). 4 Press the [F3] button. The drum part will also be muted. 38 DTX700 Owner's Manual Playing with Songs for Practice Basic Operation 5 Press the [EXIT] button to return to the Song page, and then press the [F3] button to start the song. You should now hear only the song's bass part. Locking a Kit When you select a new song, your DTX700 normally chooses the best kit for that song automatically. You can, however, use the Kit Lock function to prevent this if you wish to keep the current kit when practicing with different songs. 1 Press the [KIT] button. 2 Select the kit you wish to play. 3 Hold down the [SHIFT] button and press the [F1] button. The lock icon will be displayed beside the kit number. 4 Press the [SONG] button. DTX700 Owner's Manual 39 Basic Operation Playing with Songs for Practice 5 Turn the dial to select a new song. NOTE · To unlock the kit, repeat Steps 1 through 3 above. [. . . ] Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDIA Yamaha Music India Pvt. 5F Ambience Corporate Tower Ambience Mall Complex Ambience Island, NH-8, Gurgaon-122001, Haryana, India Tel: 0124-466-5551 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 SPAIN/PORTUGAL Yamaha Música Ibérica, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 INDONESIA PT. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA DTX700




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA DTX700 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.