User manual YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA DSR112 DSR115 DSR215 DSR118W. We hope that this YAMAHA DSR112 DSR115 DSR215 DSR118W user guide will be useful to you.


YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1: Download the complete user guide (2967 Ko)

You may also download the following manuals related to this product:

   YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1 (1529 ko)
   YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1 (1565 ko)
   YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1 (3052 ko)
   YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1 (3030 ko)
   YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1 (3029 ko)
   YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1 (3030 ko)
   YAMAHA DSR112 DSR115 DSR215 DSR118W ANNEXE 1 (3028 ko)

Manual abstract: user guide YAMAHA DSR112 DSR115 DSR215 DSR118WANNEXE 1

Detailed instructions for use are in the User's Guide.

[. . . ] POWERED S PE A K E R S POWERED SPEAKER DSR DSR118W MODE D’EMPLOI series DSR112 DSR115 DSR215 POWERED SUBWOOFER OWNER’S MANUAL BEDIENUNGSANLEITUNG EN DE FR ES IT RU ZH JA MANUAL DE INSTRUCCIONES MANUALE DI ISTRUZIONI Italiano Español Français Deutsch English The above warning is located on the rear of the unit. l’avertissement ci-dessus est situé sur l’arrière de l’unité. Explanation of Graphical Symbols Explication des symboles The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. l’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une « tension dangereuse » non isolée à l’intérieur de l’appareil , pouvant être suffisamment élevée pour constituer un risque d’électrocution. [. . . ] Interference From Cell Phones Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system. Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed. included Accessories • AC power cord • Owner’s manual (this book) ■ D-CONTOUR (Dynamic CONTOUR) feature (DSR112/DSR115/DSR215) D-CONTOUR is a newly developed three-band multiband compressor. It dynamically adjusts the level of each frequency range according to the volume of speaker outputs. It boosts the high and low frequencies when the volume level is low, and it reduces the amount of boost when the volume level is high. 6 DSR112/DSR115/DSR215/DSR118W Owner’s Manual Controls and Functions Controls and Functions Rear panel 3 7 4 9 8 ) 2 5 !@ 2 6 3 7 4 9 8 ) 1 1 DSR112 / DSR115 / DSR215 DSR118W 1 INPUT jacks These are balanced XLR and phone input jacks. The output limiter will operate in the following situations, attenuating the output signals to the amplifier. € If the output voltage of the amplifier has exceeded the maximum value • If excessive integral power consumption is detected • If the amplifier overheats NOTE You may use either the XLR or the phone jack, but not both types simultaneously. Input signals will be passed through unaffected, since these are parallel connected to the INPUT jacks. € The integral power consumption refers to the sum of power consumption provided to the speaker driver per unit time. 3 PEAK Indicator Lights red when the input level reaches 3dB below clipping. If the PEAK indicator frequently lights, adjust the volume of the input source so that the PEAK indicator flashes briefly on the highest input levels. € (DSR112/DSR115/DSR215) If the output voltage of the amplifier has exceeded the maximum value, or if excessive integral power consumption is detected, the LIMIT indicator will light when the amount of attenuation is 3dB or higher. Set the MIC/LINE switch (5) of the DSR112, DSR115 and DSR215 to LINE when connecting a device (such as a mixer) whose specified output level is +4dBu. In this condition, set the LEVEL control to roughly a 12:00 position to obtain sufficient output. If the protection system has engaged after the problem was detected, waiting until the amplifier cools down or powering off and on again will return to normal operation. If the unit does not return to normal operation, please contact your Yamaha dealer. 5 MIC/LINE switch (DSR112/DSR115/DSR215) Set this switch to MIC or LINE for INPUT jacks, depending on the level of the input signal. For low-level signals (such as microphones), set the switch to the MIC (O) position. For highlevel signals (such as electronic musical instruments and audio equipment), set the switch to the LINE (N) position. [. . . ] If the device won’t automatically reset itself, turn off the power, and then on again. A microphone is directed toward the Keep the speaker away from the area where the speaker. Sound howls (feedback) Lower the volume of the input device and locate the microphone more closely to the sound source. Turn the HPF switch on (O) if you get feedback in low frequency bands. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA DSR112 DSR115 DSR215 DSR118W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA DSR112 DSR115 DSR215 DSR118W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.