User manual YAMAHA DME-N NETWORK DRIVER INSTALLATION GUIDE FOR M7CL/LS9/DSP5D

[. . . ] · Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. · Windows is the registered trademarks of Microsoft® Corporation. · Adobe, the Adobe logo, Acrobat, and the Acrobat logo are the trademarks of Adobe Systems Incorporated. · All other company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies. [. . . ] When a device is selected in the list, information related to that device will appear in the device information area 2 below the list. [Device Name] This is the name of the device selected in the Target Device List. The initial default settings are "UNIT1" through "UNIT256", but the name can be edited as required in the Device Name field. [Device IP Address] The IP address of the device selected in the Target Device List can be set via these fields. Refer to the manual of the corresponding device for details on checking and setting its IP address. n The IP address must be set properly or communication with the device will not be possible. Device Name This column lists the names of devices registered to communicate with the YAMAHA DME-N Network driver. When a device is selected in the list it's name also appears in the Device Name field in the device information area 2 below the list. [Device MAC Address] The MAC (Media Access Control) address of the device selected in the Target Device List can be set via these fields. The MAC address of each device is permanently assigned when the device is manufactured and cannot be changed. The MAC address parameter is included to prevent data from being sent to the wrong device if the IP address in inadvertently set incorrectly. Refer to the manual of the corresponding device for details on checking its MAC address. n The MAC address must be set properly or communication with the device will not be possible. n The MAC address of the connected device cannot be changed. Device IP Address The IP number of the corresponding device. When a device is selected in the list it's IP number also appears in the Device IP Number field in the device information area 2 below the list. English Device MAC Address The MAC address of the corresponding device. When a device is selected in the list it's MAC address also appears in the Device MAC Address field in the device information area 2 below the list. Device Port No. The MIDI port number of the corresponding device. When a device is selected in the list it's MIDI port number also appears in the Device Port No. The "Internet Protocol (TCP/IP) Properties" dialog box will be displayed. Select "Permit All" for TCP Ports, then click [OK]. 9 Enter your computer's IP address into [IP address], the Gateway's IP address into [Default gateway], and "255. 255. 255. 0" into [Subnet mask]. n When installing on the same subnet as the DME unit(s), set the gateway's host address to 254. 4 5 6 7 10 11 Click [OK]. Restart your computer. The display returns to the "Advanced TCP/IP Settings" dialog. Click [OK] to return to the "Internet Protocol (TCP/ IP) Properties" dialog. 8 Click [Use the following IP address] on the [General] tab. 8 DME Designer Installation Guide Windows 2000 1 Select [Start] [Settings] [Control Panel] [Network and Dial-Up Connections] [Local Area Connection]. The "Local Area Connection Status" dialog box will be displayed. The "Local Area Connection Properties" dialog box will be displayed. Click [Internet Protocol (TCP/IP)] on the [General] tab, then click [Properties]. The "Internet Protocol (TCP/IP) Properties" dialog box will be displayed. Select "Permit All" for TCP Ports, then click [OK]. 6 7 Click [Use the following IP address] on the [General] tab. Enter your computer's IP address into [IP address], the Gateway's IP address into [Default gateway], and "255. 255. 255. 0" into [Subnet mask]. n When installing on the same subnet as the DME unit(s), set the gateway's host address to 254. 2 3 4 5 8 9 Click [OK]. Restart your computer. The display returns to the "Advanced TCP/IP Settings" dialog. [. . . ] · You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers. · You may not use the SOFTWARE to distribute illegal data or data that violates public policy. · You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation. Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe. [. . . ]