User manual YAMAHA CLP-123

[. . . ] CLP-123 Owner's Manual Page 2 -- 19 English Bedienungsanleitung Seite 20 -- 37 Deutsch Mode d'emploi Pages 38 -- 55 Français Manual de instrucciones Páginas 56 -- 73 Español 1 Introduction Thank you for choosing a Yamaha CLP-123 Clavinova. Your Clavinova is a fine musical instrument that employs advanced Yamaha music technology. With the proper care, your Clavinova will give you many years of musical pleasure. q Yamaha's AWM (Advanced Wave Memory) tone generator system offers rich, realistic voices. [. . . ] This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the Clavinova without affecting the external MIDI device, and vice versa. MIDI/ TRANSPOSE PIANO 1 PIANO 2 CLAVIN TON Z Hold down the [MIDI/TRANSPOSE] button. If the PIANO 2 LED is lit when the [PIANO 2] voice selector is pressed, you have turned program change reception/transmission OFF. If the PIANO 2 LED is not lit when the [PIANO 2] voice selector is pressed, you have turned program change reception/transmission ON. PIANO 2 PIANO 2 = Program Change OFF = Program Change ON C Release the [MIDI/TRANSPOSE] button. 16 q Control Change ON/OFF Normally the Clavinova will respond to MIDI control change data received from an external MIDI device or keyboard, causing the selected Clavinova voice to be affected by pedal and other "control" settings received from the controlling device. The Clavinova also transmits MIDI control change information when one of its pedals are operated. This function makes it possible to cancel control change data reception and transmission if you do not want the Clavinova voices to be affected by control change data received from an external device or vice versa. MIDI/ TRANSPOSE ANO 1 PIANO 2 CLAVINOVA E. If the CLAVINOVA TONE LED is lit when the [CLAVINOVA TONE] voice selector is pressed, you have turned control change reception/transmission OFF. If the CLAVINOVA TONE LED is not lit when the [CLAVINOVA TONE] voice selector is pressed, you have turned control change reception/transmission ON. CLAVINOVA TONE CLAVINOVA TONE = Control Change OFF = Control Change ON C Release the [MIDI/TRANSPOSE] button. The Multi-Timbre mode is a special mode in which the Clavinova voices can be independently controlled on different MIDI channel numbers (1 through 10) by an external MIDI device such as the Yamaha DRC-20 Disk Recorder. The Multi-Timbre mode can be activated as follows: q The Multi-Timbre Mode MIDI/ TRANSPOSE ANO 2 CLAVINOVA E. PIANO = Multi-Timble Mode ON = Multi-Timble Mode OFF LED is lit when the [E. PIANO] voice selector is pressed, you have turned the MultiTimbre mode ON. PIANO] voice selector is pressed, you have turned the Multi-Timbre mode OFF. C Release the [MIDI/TRANSPOSE] button. A Multi-timbre Example Here's an example of how you could use the Multi-Timbre mode to record two different parts on the DRC-20 Disk Recorder that will play different voices on the Clavinova when played back. MIDI OUT MIDI IN MIDI OUT MIDI IN DRC-20 Clavinova Z Connect the DRC-20 to the Clavinova as shown to the left. The recorded parts will be played back using the individual voices selected during recording, providing a full ensemble sound. 17 MIDI Functions q The MIDI Split & Left Local OFF Mode In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha DOM-30 Disk Orchestra Module. In this mode the right-hand section of the keyboard is used to play an internal Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator. Playing the left-hand section of the keyboard produces no sound from the Clavinova. The "split point, " or the key that divides the left- and right-hand sections of the keyboard can be set at any desired key. The MIDI split mode is useful if, for example, you want to play a piano (Clavinova) voice with the right hand while playing a synthesizer bass line or string section with the left hand. When the MIDI split mode is activated, notes played on the left-hand section are transmitted via the Clavinova MIDI OUT connector on MIDI channel 2. Notes played on the right-hand section are transmitted on the "basic channel" (i. e. the channel set using the MIDI channel selection function described previously). MIDI OUT OPTIONAL IN L R LINE OUT R L MIDI IN DOM-30 Clavinova (Set to receive on MIDI channel 2) VINOVA E. PIANO ONE HARPSICHORD Z Press the [HARPSICHORD] voice selector while holding down the [MIDI/TRANSPOSE] button. The HARPSICHORD LED will flash. MIDI/ TRANSPOSE X While still holding the [MIDI/TRANSPOSE] button, press the key on the keyboard at which you want to set the split point. The split-point becomes the first key of the left-hand section. SPLIT POINT w C Release the [MIDI/TRANSPOSE] button. [. . . ] Examples of wet/damp locations are; near a swimming pool, spa, tub, sink, or wet basement. 8. 1. Main Power Supply Verification: Yamaha products are manufactured specifically for the supply voltage in the area where they are to be sold. If you should move, or if any doubt exists about the supply voltage in your area, please contact your dealer for supply voltage verification and (if applicable) instructions. For name plate location, please refer to the graphic found in the Special Message Section of this manual. 2. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by the manufacturer. If a cart, rack, or stand is used, please observe all safety markings and instructions that accompany the accessory product. 9. The power supply cord (plug) should be disconnected from the outlet when electronic products are to be left unused for extended periods of time. [. . . ]