User manual YAMAHA CLP-122S

[. . . ] CLP-122S Owner's Manual Page 2 -- 19 English Bedienungsanleitung Seite 20 -- 37 Deutsch Mode d'emploi Pages 38 -- 55 Français Manual de instrucciones Páginas 56 -- 73 Español 1 Introduction Thank you for choosing a Yamaha CLP-122S Clavinova. Your Clavinova is a fine musical instrument that employs advanced Yamaha music technology. With the proper care, your Clavinova will give you many years of musical pleasure. q Yamaha's AWM (Advanced Wave Memory) tone generator system offers rich, realistic voices. [. . . ] PIANO = Multi-Timble Mode ON = Multi-Timble Mode OFF LED is lit when the [E. PIANO] voice selector is pressed, you have turned the MultiTimbre mode ON. PIANO] voice selector is pressed, you have turned the Multi-Timbre mode OFF. C Release the [MIDI/TRANSPOSE] button. A Multi-timbre Example Here's an example of how you could use the Multi-Timbre mode to record two different parts on the DRC-20 Disk Recorder that will play different voices on the Clavinova when played back. MIDI OUT MIDI IN MIDI OUT MIDI IN DRC-20 Clavinova Z Connect the DRC-20 to the Clavinova as shown to the left. The recorded parts will be played back using the individual voices selected during recording, providing a full ensemble sound. 17 MIDI Functions q The MIDI Split & Left Local OFF Mode In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha DOM-30 Disk Orchestra Module. In this mode the right-hand section of the keyboard is used to play an internal Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator. Playing the left-hand section of the keyboard produces no sound from the Clavinova. The "split point, " or the key that divides the left- and right-hand sections of the keyboard can be set at any desired key. The MIDI split mode is useful if, for example, you want to play a piano (Clavinova) voice with the right hand while playing a synthesizer bass line or string section with the left hand. When the MIDI split mode is activated, notes played on the left-hand section are transmitted via the Clavinova MIDI OUT connector on MIDI channel 2. Notes played on the right-hand section are transmitted on the "basic channel" (i. e. the channel set using the MIDI channel selection function described previously). MIDI OUT OPTIONAL IN L R LINE OUT R L MIDI IN DOM-30 Clavinova (Set to receive on MIDI channel 2) VINOVA E. PIANO ONE HARPSICHORD Z Press the [HARPSICHORD] voice selector while holding down the [MIDI/TRANSPOSE] button. The HARPSICHORD LED will flash. MIDI/ TRANSPOSE X While still holding the [MIDI/TRANSPOSE] button, press the key on the keyboard at which you want to set the split point. The split-point becomes the first key of the left-hand section. SPLIT POINT w C Release the [MIDI/TRANSPOSE] button. V To return to the normal full-keyboard mode, hold the [MIDI/TRANSPOSE] button and press the [HARPSICHORD] voice selector, then release both buttons. Note: When the power is turned ON the default split point key -- F#2 -- will be automatically selected. If a new split point is selected it remains active until the power is turned OFF or a different split point is selected. Left-hand section plays a DOM-30 bass voice. Right-hand section plays a Clavinova piano voice. q The MIDI Split & Right Local Off Mode In the CLP-122S either the right- or left-hand section of the keyboard can be assigned to control an external keyboard or tone generator. Assigning the left-hand section to external tone generator control was described in the previous section. To assign the right-hand section to external tone generator control while playing the Clavinova voices with the left hand, press the [ORGAN] voice selector instead of the [HARPSICHORD] voice selector when activating the Split mode (see the preceding section). All other operations are exactly the same as described in the previous section. 18 Troubleshooting If you encounter what appears to be a malfunction, please check the following points before assuming that your Clavinova is faulty. 1. No Sound When the Power is Turned ON Is the AC plug properly connected to an AC wall outlet?Is the MASTER VOLUME control turned up to a reasonable listening level? 2. The Clavinova Reproduces Radio or TV Sound This can occur if there is a high-power transmitter in your vicinity. [. . . ] If you are unable to insert the plug into the outlet, turn the plug over and try again. If the problem persists, contact an electrician to have the obsolete outlet replaced. Do NOT defeat the safety purpose of the plug. 3. Care should be taken that objects do not fall and liquids are not spilled into the enclosure through any openings that may exist. 11. Some electronic products utilize external power supplies or adapters. Do NOT connect this type of product to any power supply or adapter other than one described in the owners manual, on the name plate, or specifically recommended by Yamaha. 4. Electrical/electronic products should be serviced by a qualified service person when: a. [. . . ]