User manual YAMAHA CL5/CL3/CL1 V1.5 REFERENCE MANUAL

[. . . ] How to Use This Reference Manual The CL5/CL3/CL1 Reference Manual (this document) allows you to search for terms and take advantage of links in the text. Searching for terms To search for a term, use the search function of the software you’re using to view this document. If you’re using Adobe Reader, enter the term in the search box and press the <Enter> key of your computer keyboard to search for occurrences of that term. Displaying the next/previous view If you’re using Adobe Reader, you can jump to the previous/next view in your viewing history. This is a convenient way to jump back to the previous page after you’ve used a link to jump to a different page. Reference Manual Using the Function Tree A function tree for the CL5/CL3/CL1 is provided on page 4 and following. You can use this function tree to find the page that explains an on-screen display or function. EN Contents Contents How to Use This Reference Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This popup window contains on/off switches for the signals sent from each channel to the corresponding bus, and lets you select the send point (PRE or POST) (see page 41). NOTE At this time, you make sure that the send level from the ST IN channel you selected in step 3 to the corresponding MIX bus is set to –∞ dB. If you raise this send level, the output of the effect will be returned to the input of the same effect, possibly causing oscillation. 2. Press the L side of the INPUT PATCH button to open the CH SELECT popup window, and select the insert-out of a channel as the input-source. For details on the CH SELECT popup window, refer to step 5 of “Virtual rack operations” on page 115. Press the L side of the OUTPUT PATCH button to open the CH SELECT popup window, and select the insert-in of the same channel as the output-destination. For details on the CH SELECT popup window, refer to step 6 of “Virtual rack operations” on page 115. If you are inserting an effect into a channel that handles a stereo source, assign the R channel insert-out/insert-in to the R input and output. Use the Bank Select keys in the Centralogic section to access the OVERVIEW screen for the channel into which you inserted the effect. Press the INSERT/DIRECT OUT field to access the INSERT/DIRECT OUT popup window. Make sure that the rack you inserted into the input and output ports is selected. For more information on insert-out/in, see “Inserting an external device into a channel” on page 21. Turn on the INSERT ON/OFF button for the channel into which you inserted the effect. In this state, effect insertion is enabled for the corresponding channel. In the Function Access Area, press the RACK button to access the VIRTUAL RACK window, and use the EFFECT tab to display the EFFECT field. For details on editing the effect parameters, refer to “Editing the internal effect parameters. ” NOTE • The levels before and after the effect are shown by the input and output meters in the upper right of the EFFECT popup window. • Adjust the effect send master level and the effect parameters so that the signal does not reach the overload point at the input or output stage of the effect. 3. 8. 4. 5. 9. To adjust the master level of the effect send, call up the MIX channel you specified as the input-source of the rack in step 2 to the Centralogic section, and adjust the corresponding fader. Set the level as high as possible without allowing the post-effect signal to reach the overload point. NOTE The input and output levels of the effect are shown by the input/output meters in the upper right of the EFFECT popup window. 6. 7. 8. 10. To adjust the effect return level, operate the ST IN channel that you selected as the output-destination for the rack in step 3. Inserting an internal effect into a channel This section explains how to insert an effect into a channel by assigning the input/output of the internal effect to the input/output of the desired channel (except for a ST IN channel). 9. 1. Follow steps 1–3 described in “Virtual rack operations” on page 115, to mount an effect in a rack. The rack in which an effect is mounted will indicate the effect type used by that effect, the number of inputs and outputs, and the levels before and after the effect. 10. Using the fader of the channel you selected as the rack’s output destination in step 3, adjust the level as appropriate. 124 Reference Manual Graphic EQ, effects, and Premium Rack Editing the internal effect parameters This section explains how to change the effect type and edit the parameters. 1 INPUT PATCH buttons Press these buttons to open the CH SELECT popup window. 1. Follow steps 1–3 described in “Virtual rack operations” on page 115, to mount an effect in a rack. A rack in which an effect is mounted will show the following information. 2 OUTPUT PATCH buttons Press these buttons to open the CH SELECT popup window. 3 Effect type field Displays the effect title, the name of the type that is used, and a graphic. [. . . ] Title list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 187 171 204 H HA (Head Amp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 N Network address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 213 DAW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]